EMBEST: EMBEDDED PI - RPI, ARDUINO-LIKE STM32 I/O BOARD

Embedded Pi is a triple-play platform for Raspberry Pi, Arduino™ and 32-bit embedded ARM. Blending all three communities together, Embedded Pi helps you to get the most out of each platform. The Embedded Pi is based on the STMicroelectronics STM32F103RB MCU, and can operate as a bridge between Raspberry Pi and Arduino™ shields and in standalone mode as a Cortex-M3 evaluation board.

Depending on the jumper placement on the Embedded Pi, you can select each of the three modes of operation:

STM32/Standalone Mode: The Embedded Pi works as a base platform, the STM32 controls the Arduino™ shields directly without the use of Raspberry Pi. It can interface with outside world and can control surroundings by sending & receiving input/output using wide variety of sensors; like controlling lights, motors, and other actuators.

A quick & easy embedded project can be built in C using CooCox development tools, a FREE and easy-to-use ARM development tool environment for Cortex-M MCU with flash programming & debugging capability (CoIDE, CoFlash, CoLinkEx etc), along with the integrated abundant reusable code shared by CooCox team and CoFans.

ST-Adapter Mode: The Embedded Pi STM32 controls the Arduino™ shields, and the Raspberry Pi works as the GUI or command line console to send commands/data to and receive data from Embedded Pi. This is an advanced mode which extends and strengthens the automation control capability of the Raspberry Pi, taking the advantage of STM32F103 NVIC (Nested Vectored Interrupt Controller), GPIOs, and more peripherals like ADC and PWM.

Raspberry Pi Mode: The Embedded Pi works as a hardware connection bridge between Raspberry Pi and Arduino™ shields, allowing the Raspberry Pi to interface directly with existing Arduino™ shields, having a number of sensors & control to interact with external environment. It offers all the possibilities of connecting digital and analog sensors using the Arduino™ shield but with the power and capabilities of Raspberry Pi.

The Embedded Pi, Raspberry Pi & Arduino™ shields together offers reasonably powerful embedded development platform with more processing power, greater I/O and fascinating display quality.

Key Applications: Sensor detection & control, Motor control, Communication, Educational, Experimentation etc.

Key Features:

• A Triple play platform for Raspberry Pi, Arduino™ & 32-Bit ARM.
• Provides Raspberry Pi with easy access to abundant Arduino™ shields.
• Brings 32-bit ARM MCU into the world of Arduino™.
• Raspberry Pi and the STM32 MCU can work independently or in conjunction with each other to control the Arduino™shields or other accessories.
• Three Working Modes: Raspberry Pi Mode, Standalone Mode & ST-Adapter Mode, selectable by jumpers.
• FREE CooCox ARM development Tool for ARM [Windows Platform Only].

Kit Features:

• Provides Raspberry Pi with easy access to abundant Arduino™ shields.
• Compatible with both 5V and 3.3V Arduino™ shields, selectable with jumpers
• Hundreds of Arduino™ shields available on the market enhance the control capability of Raspberry Pi, e.g. to control Motor, sensors, etc.
• Brings 32-bit ARM MCU into the world of Arduino™ [form factor compatible with Arduino™ shields]
• 32-bit ARM Cortex-M3 STM32F103 MCU operating at 72MHz, with 128KB Flash, 20KB RAM, motor control, USB, and CAN
• Hundreds of Arduino™ shields available on the market with extremely portable drivers provided or to be shared by CooCox and CoFans
• A complete set of FREE CooCox tools for ARM development
• Raspberry Pi and the STM32 MCU can work independently or in conjunction with each other to control the Arduino™ shields or other accessories.

Technical Specifications:

• 32-bit ARM Cortex-M3 STM32F103 MCU running at 72MHz.
• 128Kbytes of Flash memory and 20Kbytes of SRAM.
• Form factor compatible with Arduino™ shields
• Three Working Modes: RasPi Mode, Bridge Mode & STM32 Mode, selectable by jumpers.
• Enhances the control capability of Raspberry Pi, e.g. to control LED, Motor, etc.
• Provides Raspberry Pi with easy access to abundant Arduino™ shields.
• A complete set of FREE CooCox ARM development Tool platform for ARM development.
• Drivers for Arduino™ Shield
• Arduino™ Motor Control Shield.
• Arduino™ WIFI SHIELD W/ INTG ANTENNA.
• Arduino™ Ethernet Shield Rev3 WITHOUT PoE Module.

uLCD-32PTU-PI 3.2" LCD Pack for Raspberry Pi w/ Adaptor Shield + Cable

uLCD-32PTU-PI 3.2" LCD Pack for Raspberry Pi w/ Adaptor Shield + Cable

• Powerful Graphics
• Low-Cost Display Solution
• Easily Connect to your Raspberry Pi

The uLCD-32PTU-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-32PTU 3.2" LCD Display with Resistive Touch, a 4D Pi Adaptor and 5 way interface cable.

The uLCD-32PTU-PI customises the uLCD-32PTU Display specifically for interfacing with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.

The Raspberry Pi Display Module Pack enables a Raspberry Pi user to quickly connect the 4D Pi Adaptor Shield to their Raspberry Pi, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

The uLCD-32PTU-PI has a comprehensive ViSi-Genie library written to communicate with the Raspberry Pi, allowing the Visi-Genie events to be easily understood by the Raspberry Pi and users code.

Utilises the Raspberry Pi's UART Serial Port.

Note: This 4D display will NOT function as the Primary Display for the Raspberry Pi. The Raspberry Pi OS can not be displayed on this display module, it is a slave/secondary display only. The display module is programmed using the Workshop4 IDE and the Raspberry Pi acts as the Host to send/receive information to/from the display module.
Raspberry Pi itself is not included

Raspberry Pi model A 256Mb memory

The Raspberry Pi is an ultra-low-cost, deck-of-cards sized Linux computer. Developed by the Raspberry Pi Foundation in the UK, the Raspberry Pi aims to put the fun back into learning computing by promoting the study of computer science and programming at a school level. 

The Model A Raspberry Pi is a stripped-down version of the Model B Raspberry Pi, with no Ethernet, one USB port and 256MB RAM. The trade-off for removing certain features results in the Model A Raspberry Pi being $10 cheaper than the Model B in addition to using only one third the power. This low power consumption makes it ideal for projects running from a battery or solar power - robots, sensor platforms in remote locations and Wi-Fi repeaters for example.

This purchase is for 1 x 256MB Raspberry Pi Model A Board

Features:

Model A Raspberry Pi with Mounting Points and 256MB RAM

The Broadcom BCM2835 ARM11 (The one that you find in most smartphones) 700Mhz ‘System on Chip’ Processor (Similar performance to a 300MHz Pentium 2 Processor).

Integrated Videocore 4 Graphics Processing Unit (GPU) capable of playing Full 1080p High Definition Blu-Ray Quality Video (Roughly equivalent graphical processing power of an Xbox 1).

256MB RAM

The free, versatile, and highly developer friendly Debian GNU/Linux Operating System

1 x USB Ports

HDMI Video Output

RCA Video Output

3.5mm Audio Output Jack

5V Micro USB Power Input Jack

SD, MMC, SDIO Flash Memory Card Slot

26-pin 2.54mm Header Expansion Slot (Which allow for peripherals and expansion boards)

It is clear that this tiny computer will have many other applications outside of being just a learning tool. Demos already show the Raspberry Pi running games, word processing, managing spread-sheets and playing high-definition video. With access to the internet via Wi-Fi (with a USB dongle), and a high definition output, the Raspberry Pi is an incredibly versatile piece of computing kit. Most importantly the Raspberry Pi gives every child in the country a chance to own a personal computer which they can develop, learn from, and play with, at an incredibly low cost and in an unbelievably small package.

The Raspberry Pi comes without any other peripherals.

More Information

For more information about the Raspberry Pi and the Raspberry Pi Foundation, visit the Raspberry Pi Foundation’s Website: http://www.raspberrypi.org/ 

Raspberry Pi Model B 512MB

The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The Raspberry Pi is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 128 or 256 Megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. This board is intended to run Linux kernel based operating systems. 

This is the Raspberry Pi Model B 512MB RAM model with two USB ports and a 10/100 Ethernet controller. Please note some boards are made in the UK, some in China. WE DO NOT KNOW IN ADVANCE WHICH ONES YOU MAY RECEIVE! 

As typical of modern computers, generic USB keyboards and mice are compatible with the Raspberry Pi. The Raspberry Pi use Linux-kernel based operating systems. The Raspberry Pi does not come with a real-time clock, so an OS must use a network time server, or ask the user for time information at boot time to get access to time and date info for file time and date stamping. However a real time clock (such as the DS1307) with battery backup can be easily added via the I2C interface. 

Adafruit makes many accessories and starter kits for the Rasperry Pi, check them out in our Raspberry Pi section. 

Raspberry Pi® is a trademark of the Raspberry Pi Foundation. 

specifications:

- Power supply: 5 VDC, 700 mA (via micro USB)

- Based microcontroller / microprocessor: ARM1176JZF-S core, 700 MHz

- Number of I / O ports: 8 pin GPIO

- Port interface: TTL UART, SPI, I2C, USB, Composite RCA, 3.5 mm jack, 10/100 Ethernet (RJ45), LCD Panels via DSI, CSI (Camera Serial Interface), HDMI

- Bootloader: melalaui LINUX-based OS

- Weight: 39.29 grams

- Features: Memory 512 MB, 2 USB PORT, Graphics Broadcom VideoCore IV, SD Card Slot

- Dimensions: 85.60mm (L) x 56mm (W) x 21mm (H) (the size of an ATM card!)

Expansion Shield X300 for Raspberry Pi B+ and 2

Expansion Shield X300 is a one of the most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.

Features

• Input Voltage: 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
• SATA: Allows you to connect SATA devices to your Raspberry Pi
• Audio:
  1> 3.5mm MIC in jack
  2> 3.5mm stereo audio jack
  3> SPDIF output
  4> Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
• Wireless:
  1> WiFi (IEEE 802.11b/g/n) with external antenna
  2> IR sensor (38KHz)
  3> Bluetooth serial communication
• USB Storage: Self-powered USB hub with 3 ports
• Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
• Misc:
  1> Power output socket
  2> Camera flex slot so camera can still be used with the expansion board attached
  3> DIP switch to remove connection from RPi’s pin header
  4> Directly connected on top of the Raspberry Pi using the board GPIO header pins
  5> No wiring nor soldering is required
  6> Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  7> Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B Dimensions: 85 x 56mm (Same size as Raspberry Pi)

Raspberry Pi 3

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016. 

Compared to the Raspberry Pi 2 it has:

• A 1.2GHz 64-bit quad-core ARMv8 CPU
• 802.11n Wireless LAN
• Bluetooth 4.0
• Bluetooth Low Energy (BLE)

Like the Pi 2, it also has:

• 4 USB ports
• 40 GPIO pins
• Full HDMI port
• Ethernet port
• Combined 3.5mm audio jack and composite video
• Camera interface (CSI)
• Display interface (DSI)
• Micro SD card slot (now push-pull rather than push-push)
• VideoCore IV 3D graphics core

The Raspberry Pi 3 has an identical form factor to the previous Pi 2 (and Pi 1 Model B+) and has complete compatibility with Raspberry Pi 1 and 2.

We recommend the Raspberry Pi 3 Model B for use in schools, or for any general use. Those wishing to embed their Pi in a project may prefer the Pi Zero or Model A+, which are more useful for embedded projects, and projects which require very low power.

Arduino Expansion Shield for Raspberry Pi B+ (Compatible with RPi 2 Model B)

We all know Raspberry Pi is a mini-computer running on Linux operating system; while Arduino is a microcontroller running on simple I/Os. Both of them focuses on very different areas. Compared with Arduino, the Pi gets much better computing performance.

So What happens when a Pi meets an Arduino?

A simple example would be, when building a mobile robot, we use the Raspberry Pi to extend its vision and get a nice tiny monitor. Meanwhile, Arduino handle nicely with the motor driving part and delivers fast responses like obstacle avoidance. Because, without the OS, the response time of rapid changes on the Arduino is much shorter. Also the high performance Pi can deals much easily with wireless communications, imaging and running complex algorithm.

Therefore, with the Arduino and Pi together, you get a powerful "brain" and "cerebellum" for your project, at one time.

SPECIFICATION

• Onboard Microcontroller: ATmega32u4
• Arduino Leonardo Chip
• Arduino Compatible pin mapping
• Compatible with All arduino standard shield and sensors
• System Voltage: 5v
• Arduino Digital I/O: 20
• Arduino Analog I/O: 6
• Raspberry Pi B+ GPIO: 16
• Raspberry Pi B+ I2C: 1
• Raspberry Pi B+ ID_I2C: 1
• Raspberry Pi B+ SPI: 1
• Raspberry Pi B+ TTL UART: 1
• Dimension: 88mm x 56mm x 26mm(3.46" x 2.20" x 1.02")

Accessories Pack (type D) for Raspberry Pi

An accessories Pack (type D) to be used with Raspberry Pi. It consists of expansion board ARPI600, various sensors, and features Arduino connectivity support.

Supported Pi

• Raspberry Pi 1 Model A+
• Raspberry Pi 1 Model B+
• Raspberry Pi 2 Model B

ARPI600 Features

• Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
• XBee connector for connecting various XBee modules
• Sensor interface for connecting various sensors
• Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
• Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
• Onboard RTC

1. Arduino connector : for connecting Arduino shields
2. ICSP interface : Arduino ICSP
3. XBee connector : for connecting XBee communication modules
4. Sensor interface : for connecting sensors
5. Raspberry Pi connector : for connecting Raspberry Pi
6. USB TO UART
7. TLC1543 : AD converter
8. PCF8563 : RTC
9. CP2102
10. 32.768KHz crystal : for RTC
11. Power indicator
12. XBee state LED
13. XBee and Arduino interface RESET button
14. XBee EASYLINK button
15. RTC battery holder : for CR1220 button battery
16. TLC1543 reference voltage configuration jumper
17. RTC jumper
18. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
19. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
20. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
21. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control

IC09 black acrylic casing for Raspberry Pi Raspberry pi 2 or B +

Protective Case for Raspberry Pi Type B + / Raspberry Pi 2 is made of black acrylic 3 mm thick. Case Raspberry Pi will protect you from shock, impact, and minimize dust will contaminate the Raspberry Pi board. In case it has also provided a gap for access to the power supply port, HDMI, USB, audio / video, Ethernet, micro SD slot, RPI camera, as well as the port display so you do not need to open the case manually to be able to access the ports are. Case has a design that is simple yet elegant look, so it is suitable for those who want to provide optimal protection against the Raspberry Pi but do not forget the aesthetic impression in it.

Specification:

- Made of acrylic material (black) 3 mm thick strong and not easily broken.

- Provided the gap to access the power supply port, HDMI, USB, audio / video, Ethernet, micro SD slot, RPI camera, display, as well as GPIO port.

- Compatible with the Raspberry Pi Type B + / Raspberry Pi 2

Raspberry Pi type B+ black case

Raspberry Pi type B+ black case

Black Raspberry Pi case for Model B+. This case features an easy snap fit design with cut outs for all hardware features. This case can be mounted on to any surface using the two screw slots on the under side, the case is also vented underneath to prevent over heating. This case supports the Raspberry Pi camera by mounting inside the top with two screws and cut out for pin hole camera. The top of the case features three cutouts for feeding ribbon cables out of the case for the Raspberry Pi camera and touch screen display.

• Black case
• ABS material with a smooth finish
• Supports mounting for Raspberry Pi camera board
• Ventilation for heat dissapation
• Snap-fit design
• Raspberry Pi logo displayed on top
• Rubber feet
• Cut outs for connectors and ribbon cables
• Body Colour:  Black
• Enclosure Material:  ABS (Acrylonitrile Butadiene Styrene)
• External Depth:  94.25mm
• External Height:  33.15mm
• External Width:  63.1mm
• For Use With:  Compatible with Raspberry Pi Model B+
• Accessory Type:  Enclosure
• Enclosure Type:  Raspberry Pi B+ Box
• External Depth - Imperial:  3.7"
• External Depth - Metric:  94mm
• External Height - Imperial:  1.18"
• External Height - Metric:  31mm
• External Width - Imperial:  2.4"
• External Width - Metric:  61.5mm
• Features:  2 Piece Construction, Moulded in Lightly Textured ABS Plastic, Cable Access Slots, Vented Base

MyCobot 280 Pi- 6 DOF Collaborative Robot Arm (Raspberry Pi Version)

MyCobot 280 Pi 6 DOF Raspberry Pi Cobot Collaborative Robot Artificial Intelligence Kit

MyCobot 280 Pi is an ARM robot with 6 degrees of freedom (6 DOF) that uses a Raspberry Pi mini pc board as its main controller. This robot can be used for AI recognition and learning using ARM robots.

MyCobot 280 Pi uses the Ubuntu operating system in which the Robot Operating System (ROS) is embedded, so it is very suitable for robot learning from the software side.

This robot can be used to move goods from one place to another, for image processing, and so on. This robot supports many programming languages, namely Python, C++, C#, and Javascript.

In addition, this robot can also be programmed using block visual programming, so this robot is also very suitable for school children who are starting to learn robot programming using block programming.

ONLINE ORDER

Feature :

• Built-in Robot Operating System (ROS)
• Support Multiple Programming Languages ​​and Visually Programmable
• Has a Unique and Compact Design
• Supports AI Algorithms such as Image Recognition and Others
• Equipped with Raspberry Pi GPIO Port
  
  
  

Specifications:

• Model : myCobot-Pi
• Input Power : 8V 5A
• Controller : Raspberry Pi 4B 1.5GHz 4 Core CPU
• Interface: USB Type-C
• Degree of Freedom : 6 DOF
• Payload : 250g
• Working Range : 280mm
• Repeatability : +- 0.5mm
• Operating Temperature : -5°C ~ 45°C

Sales Package:

• 1x MyCobot 280 Pi 6 DOF
• 1x Adapter
• 1x Guidebook

ONLLINE ORDER: 

https://tokopedia.com/rosesana/mycobot-280-pi-6-dof-collaborative-robot-arm-raspberry-pi-version

Datasheet 

https://www.elephantrobotics.com/wp-content/uploads/2021/03/myCobot-User-Mannul-EN-V20210318.pdf

4 Port USB HUB HAT for Raspberry Pi

An additional USB hub module for Raspberry Pi. This module provides 4 USB 2.0 / 1.1 ports that you can use to expand the number of USB ports on Raspberry Pi, so you can more freely add some USB devices to Raspberry Pi. In addition to this module has also provided a USB to UART on-board converter that can be used for serial debugging activities.

This module also has a universal design, so it can be used for all Raspberry Pi types, especially Raspberry Pi Zero.

Specification:

- Working Voltage: 5 V

- Dimensions: 65 × 30 mm

- Number of USB Ports: 4x USB 2.0 / 1.1

- Compatibility: Compatible with all versions of Raspberry Pi

- Features: Equipped with USB to UART on-board converter and multifunctional indicator.

Wiki

Raspberry Pi is not included in the sales package

Assembled Gertboard, For Raspberry PI

Gertboard is an input/output (I/O) extension board for the Raspberry Pi computer. It fits onto the GPIO pins of the Raspberry Pi (the double row of pins on the upper left corner) via a socket on the back of the Gertboard. A bit of care is required when putting the two devices together. It is easy to insert just one row of pins into the socket, but all of the pins need to be connected. The Gertboard gets its power from those GPIO pins, so user will need a power supply for the Raspberry Pi (RPi) that is capable of supplying a current of at least 1A. It is a flexible experimenter board that plugs directly into Raspberry Pi, and out into the physical world, allowing user to detect and respond to external physical events. Detect and output analogue voltages. Drive powerful motors. Detect switch presses. Illuminate LEDs and drive relays. Jumper cables allow user to hook up different parts of the circuit in many different ways, allowing total flexibility. All controlled by Raspberry Pi.

• Plugs directly onto Raspberry Pi GPIO socket
• Motor controller, capable controlling a motor bidirectionally, delivering 18V and 2A maximum
• Dual channel D/A converter, 8bit
• Dual channel  A/D converter, 10bit
• Onboard Atmel ATmega328ATmega328 MCU for running off board programmes
• 6 x open collector outputs
• 12 x LED indicators
• 3 x momentary push switches
• 10 x strap cables and 18 x jumpers included
• Software and manuals available to operate and learn how to use Gertboard

Applications

• Hobby & Education; Security; Motor Drive & Control; Sensing & Instrumentation

Compatible with Raspberry Pi Model A/B/B+

Raspberry Pi 4 Your tiny, dual-display, desktop computer

 Raspberry Pi 4 Your tiny, dual-display, desktop computer

and robot brains, smart home hub, media centre, networked AI core, factory controller, and much more

The speed and performance of the new Raspberry Pi 4 is a step up from earlier models. For the first time, we've built a complete desktop experience. Whether you're editing documents, browsing the web with a bunch of tabs open, juggling spreadsheets or drafting a presentation, you'll find the experience smooth and very recognisable — but on a smaller, more energy-efficient and much more cost-effective machine

The fanless, energy-efficient Raspberry Pi runs silently and uses far less power than other computers.

Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth.

Your new Raspberry Pi 4 has upgraded USB capacity: along with two USB 2 ports you'll find two USB 3 ports, which can transfer data up to ten times faster.

Raspberry Pi 4 available, depending on how much RAM you need — 2GB, 4GB, or 8GB.

Order Online:

• https://tokopedia.com/rosesana/raspberry-pi4-8gb-model-b-made-in-uk
• https://tokopedia.com/rosesana/raspberry-pi4-model-b-4gb-ram-made-in-uk
• https://tokopedia.com/rosesana/paket-hemat-raspberry-pi4-8gb-ram
• https://tokopedia.com/rosesana/paket-hemat-raspberry-pi4-4gb-ram
• https://www.tokopedia.com/rosesana/product?q=Raspberry%20pi&srp_component_id=02.01.00.00&srp_page_id=72759&srp_page_title=2R%20Hardware%20%26%20Electronic&navsource=shop

Raspberry Pi 3B Plus Quad Core 1.4GHz ARM CPU Gigabit Ethernet

Raspberry Pi 3B Plus Quad Core 1.4GHz Gigabit Ethernet CPU ARM - United Kingdom Board

Raspberry Pi 3 Model B + is the latest version of the Raspberry Pi 3 series, Pi 3B + has the shape and size identical to Pi 3B, but when compared to Raspberry Pi 3 Model B, Pi 3B + has improved in some hardware parts, from 64- bit which now has a maximum clockspeed of 1.4 GHz (formerly 1.2 GHz on Pi 3B), has Gigabit Ethernet (support PoE) which is certainly much faster than previous versions, has heatsinks on processors for better heat distribution, and supports dual band WLAN 5 GHz and 2.4 GHz.

ONINE OTDER

Specification:

-Broadcom BCM2837B0 chipset

-1.4GHz Quad-Core ARM Cortex-A53, 4 cores

-64 bit CPU

-1GB of RAM

-4 USB 2.0 ports (via LAN7515)

-Gigabit Ethernet (via LAN7515, max speed 300Mbps)

-PoE (power over Ethernet)

-40 pin headers (26 GPIOs)

-MicroUSB power connector

-Dual-band (2.4GHz and 5GHz) 802.11ac Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)

-HDMI

-CSI camera interface

-DSI connector for official screen

-3.5mm jack connector Supporting stereo audio and composite video

-2-pin reset header

-Micro SD socket

-One Power: 5V / 2.5A DC

Note: To be able to use PoE feature required PoE HAT module

former version Raspberry pi 3 model B

PI-DESKTOP

PI-DESKTOP is the revolutionary accessories kit for the Raspberry Pi that can change the Raspberry Pi 2/3 you become a desktop PC in general. The kit comes converter module to lay the SSD (Solid State Disk) through mSATA connector, so that the Raspberry Pi storage can be expanded up to 1 terabytes. 

This kit is also equipped with RTC (Real Time Clock) in order to keep time on a Raspberry Pi configuration remains appropriate and updated despite Raspberry power supply to be disconnected. 

PI-DESKTOP comes with a stylish case design and futuristic. This case makes it easy to access the ethernet port, HDMI, USB, power, and audio jacks. Case also comes Tobol power to turn on, turn off, or restart the device Raspberry Pi.

Note: Raspberry Pi, SSDs, and power supply are not included in the sales package.

Acrylic clear case for Raspberry Pi B plus, Raspberry Pi 2 & Raspberry Pi 3

Raspberry Pi Model B plus with a clear acrylic material. This case provides easy access to the HDMI port, USB, Audio / Video, or SD Card

specifications:
- Clear Acrylic Material.
- Suitable for Raspberry Pi Model B plus. Raspberry Pi 2 & Raspberry Pi 3
- Rasberrpy Pi Model B plus sold separately.

ADC-DAC Pi

Power to the board is provided through the host Raspberry Pi using the GPIO port. Only one ADC-DAC Pi can be used on a Raspberry Pi but the extended pins on the GPIO connector allow you to stack the ADC-DAC Pi along with other expansion boards.

The A/D and D/A converters communicate with the Raspberry Pi through the SPI interface. 

The ADC-DAC Pi V1.0 is a 2 channel 12 bit analogue to digital converter and 2 channel 12 bit digital to analogue converter designed to work with the Raspberry Pi platform. 

The ADC-DAC Pi is based on the Microchip MCP3202 A/D converter containing 2 analogue inputs with 12 bit resolution with a Microchip MCP4822 dual channel 12-bit DAC with internal voltage reference.

Max ADC Sample Rate: 100 ksamples/sec

Max ADC Sample Rate under Python: 12,000 samples per second.

The ADCDAC Pi is compatible with all Raspberry Pi models.

Raspberry Pi Compute Module Development Kit

The new Raspberry Pi Compute Module Develop Kit enables advanced design engineers to use the Compute Module IO Board and Compute Module along with the downloadable board schematics to create their own PCB design and harness the power of the Raspberry Pi into their own embedded application.

Features:

• Broadcom BCM2835 CPU 700MHz
• SODIMM sized (6.5cm by 3cm) Raspberry Pi board
• 512MB RAM
• 4GB eMMC Flash memory
• micro USB connector type B
• 2 x CSI ports for camera boards
• 2 x DSI ports for display boards
• Full size HDMI port
• Micro USB power connector

Contents:

Raspberry Pi Compute Module IO Board, Raspberry Pi Compute Module, Raspberry Pi Display & Camera Adapter, 5V Micro USB Power Supply, Micro USB Data Cable, 4 x jumper wires

5Mpx camera modul for raspberry pi

RPI CAMERA BOARD plugs directly into the CSI connector on the Raspberry Pi. It's able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps with latest v1.3. Board features a 5MP (2592 × 1944 pixels) Omnivision 5647 sensor in a fixed focus module. The module attaches to Raspberry Pi, by way of a 15 pin Ribbon Cable, to the dedicated 15 pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

• Fully compatible with both the Model A and Model B Raspberry Pi
• 5MP omnivision 5647 camera module
• Still picture resolution of 2592 x 1944
• Video supports 1080p at 30fps, 720p at 60fps and 640x480p 60/90 recording
• 15 pin MIPI camera serial interface plugs directly into the Raspberry Pi Board
• Size is 20mm x 25mm x 9mm
• Weight of 3g
• Fully compatible with the ModMyPi Raspberry Pi Case

Compatible with Raspberry Pi Model A/B/B+