Saturday, July 12, 2014

MS6507 Digital Thermometer and data logger

MS6507 Digital Thermometer 

Features: 
- Dual-ended input
· Digital display: 3 LCD
· RS232 Computer Interface
· Data Retention
· Data logging
· Differential measurement
· Maximum / minimum measurement
· Clock function
- Automatic shutdown
· Background light

Technical parameters: 
· Temperature range and accuracy
T1: -200.0 ∽ 200.0 ℃ (0.1 ℃) ± 1.0 ℃, 200 ∽ 1370 ℃ ± 1.4 ℃
-200.0 ∽ 200.0 ℉ (0.1 ℉) ± 2.0 ℉, -328 ∽ -200 ℉ / 200 ∽ 2498 ℉ ± 3.0 ℉
T2: -200.0 ∽ 200.0 ℃ (0.1 ℃) ± 1.0 ℃, 200 ∽ 1370 ℃ ± 1.4 ℃
-200.0 ∽ 200.0 ℉ (0.1 ℉) ± 2.0 ℉, -328 ∽ -200 ℉ / 200 ∽ 2498 ℉ ± 3.0 ℉
T1-T2: -200.0 ∽ 200.0 ℃ (0.1 ℃) ± 2.0 ℃, -2200 ∽ -200 ℃ / 200 ∽ 2200 ℃ ± 3.0 ℃
-200.0 ∽ 200.0 ℉ (0.1 ℉) ± 4.0 ℉, -2826 ∽ -200 ℉ / 200 ∽ 2826 ℉ ± 6.0 ℉
· Power supply: 9V (6F22) × 1
· AC power adapter: DC 9V/30mA
· Dimensions: 193 × 74 × 33mm
· Weight: about 240g (with battery)

MS6506 Digital Thermometer.

MS6506 Digital Thermometer 

Features: 
· Digital display: 3 LCD
· RS232 Computer Interface
· Data Retention
· Data logging
· Maximum / minimum measurement
· Clock function
- Automatic shutdown
· Background light

Technical parameters: 
· Temperature range and accuracy
-200.0 ∽ 200.0 ℃ (0.1 ℃) ± 1.0 ℃, 200 ∽ 1370 ℃ ± 1.4 ℃
-200.0 ∽ 200.0 ℉ (0.1 ℉) ± 2.0 ℉, -328 ∽ -200 ℉ / 200 ∽ 2498 ℉ ± 3.0 ℉
· Power supply: 9V (6F22) × 1
· AC power adapter: DC 9V/30mA
· Dimensions: 193 × 74 × 33mm
· Weight: about 240g (with battery)

Crazyflie Nano Quadcopter - 4 x CW+CCW spare propeller

Crazyflie Nano Quadcopter - 4 x CW+CCW spare propellers (BC-CWP-01-A and BC-CCWP-01-A).
Spare counter rotating propellers for the Crazyflie Nano Quadcopter.


Specification
  • Size: 45 mm
  • Fits shaft: 0.8 mm
  • Pack list

4 x CW propeller
4 x CCW propeller

Crazyflie Nano Quadcopter - 4 x spare motor mount


Crazyflie Nano Quadcopter - 4 x spare motor mount (BC-MM-01-B)
Spare motor mount for the Crazyflie Nano Quadcopter.

Specification
Weight: ~0.21g
Plastic: PP

Pack list
4 x Motor mount

Crazyradio 2.4Ghz nRF24LU1+ USB radio dongle with antenna

Crazyradio 2.4Ghz nRF24LU1+ USB radio dongle with antenna (BC-CR-01-A)

The Crazyradio is the official radio dongle for the Crazyflie Nano Quadcopter. It is a 2.4GHz USB radio dongle based on the nRF24LU1+ chip from Nordic Semiconductor.

The design includes a 2x5 header (not mounted) where the dongle can be connected and powered from another source than USB. It also has two indicator LEDs.

The dongle is delivered with open source firmware and Python drivers that enables easy use. The dongle can communicate with any project using a compatible Nordic Semiconductor radio chip. The firmware can be freely modified as it is open source and can be compiled with an open source compiler (sdcc). 

A bootloader on the dongle enables firmware updates without using any external programmer. It can also be programmed over SPI, which is available in the header. This is recommended when developing for it.

Crazyradio features:
  • 2.4GHz radio communication
  • 0dBm output power (1mW)
  • 125 radio channels
  • 2Mbps, 1Mbps and 250Kps communication data-rate
  • Sends and receives data packets of up to 32 bytes
  • Automatically handles addresses and packet ack.
  • Hardware support for PPM input (no software support yet)
  • Can be powered with up to 16V via header
  • Tested up to ~80m range with the Crazyflie at 250Kbps

Friday, July 11, 2014

Crazyflie Nano Quadcopter Kit 6-DOF (BC-CFK-03-A).

Crazyflie Nano Quadcopter Kit 6-DOF (BC-CFK-03-A)

Ever wanted a development kit that flies? Well now you can! The Crazyflie is an open source nano quadcopter kit designed for flexible development and hacking. It's among the smallest in the world, weighing only 19 grams and measuring 9 cm motor to motor.

The development platform is open source so schematics and firmware/host source code is available at the Bitcraze website as well as a Wiki with design information and details on how to set up the development environment and get started. It’s designed with development in mind and has an expansion header that enables developers to expand the platform as well as good software development support. Due to it’s small size it’s perfect for developing new software and can easily be flown inside. It can lift a payload of up to 5 - 10 g.

This is the 6-DOF version utilizing a 3-axis accelerometer and a 3-axis gyro and thus capable of auto-leveling.

A 2.4 GHz radio chip from Nordic Semiconductors is used for receiving commands and sending telemetry data back to the host computer. The communication with the host is made possible by using the Crazyradio 2.4 GHz USB radio dongle. The Crazyradio can be connected to a PC (with support for Windows and Linux) but also to other hosts that support USB Host or OTG like Android phones. Mac OSX currently has beta support handled by the community.

The Crazyflie Quadcopter is shipped pre-programmed and can easily be wirelessly updated via a radio bootloader from a host PC, so no JTAG is required for reprogramming. For advanced development and debugging there’s also an accessible JTAG interface.

Crazyflie features
  • Small and lightweight, around 19g and about 90mm motor to motor
  • Flight time up to 7 minutes with standard 170mAh Li-Po battery
  • Standard micro-USB connector for charging which takes ~20min for the stock 170mAh Li-Po battery
  • On-board low-energy radio@1mW based on the nRF24L01+ chip. Up to 80m range (environment dependent) when using the Crazyradio USB dongle
  • Radio bootloader which enabled wireless update of the firmware
  • Powerful 32 bit MCU: STM32F103CB @ 72 MHz (128kb flash, 20kb RAM)
  • 3-axis high-performance MEMs gyros with 3-axis accelerometer: Invensense MPU-6050
  • Available footprints to manually solder magnetometer HMC5883L/HMC5983 or/and barometer MS5611 (sensors not included)
  • Expansion header 2×10 pins 1.27mm (0.05”) pitch including power, I2C/UART, SPI/ADC. Header also contains ARM Cortex 10-pin JTAG.
  • 4-layer low noise PCB design with separate voltage regulators for digital and analog supply
Kit includes
  • 1 x Crazyflie control board
  • 5 x Motor mounts
  • 5 x Coreless DC motors
  • 5 x CW propeller
  • 5 x CCW propeller
  • 1 x LiPo battery
  • 1 x 2*5 pins 1.27mm (0.05”) pitch header.

What is not included but needed for flying
  • A standard micro-USB cable for charging
  • A PC compatible joystick
  • A PC
  • A Crazyradio
Needed for assembly
  • A soldering iron
  • Solder
Resources

Disclaimer
Each part of the Crazyflie Nano Quadcopter Kit is tested before it leaves the factory, but please keep in mind that the kit is still experimental, unproven hardware. This hardware is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Notes:
This kit does not include the Crazyradio which can be bought separately.
This kit requires soldering skills and is not for beginners. It is not a toy and should be handled with care.

Crazyflie Nano Quadcopter - Spare battery (BC-BL-01-A).

Crazyflie Nano Quadcopter - Spare battery (BC-BL-01-A)
Spare Li-Po rechargeable battery for the Crazyflie Nano Quadcopter.

It is a small high performance battery with high safety features. It is qualified by national standard, ensuring no fire or explosion danger even when over-charged, shorted or dropped.


Specification
  • Capacity: 170 mAh
  • Nominal voltage: 3.7 V (1 Cell)
  • Discharge: 25C continuous / 50C bursts
  • Charge: 3C
  • Dimensions: 6.7x17x23 mm
  • Weight: 5 g
  • Operating Temperature: 0 ~50°C (Charging) / -20~60°C (Discharging)
  • Connector: JST-ZHR-2P (Pin 1 positive)

Cautions
Using the battery under direct sunlight may cause overheating, which could result in invalidation or fire.
Battery should be charged with proper charger, in compliance with correct operation instructions.

I2C to Parallel Converter module

I2C To Parallel Converter  module is an input / output parallel configuration of 16 lines with 2 x 8-bits that can be read and written via the I2C serial communication. This module can be used to expand the I / O on the system microcontroller / microprocessor.


specifications: 
- Requires +5 V DC power supply.
- Based PCA9539 can work on the power supply +2.3 V to +5.5 V DC.
- I2C serial interface, the maximum data communication speed of 400 kHz.
- Has 2 ports, each of which consists of 8 lanes and each lane can be set as input or output.
- Available RESET path to restore the module to default when the line was given a logic low.
- There is a path INT (interrupt) which can be used to detect changes in the input.
- Each path I / O can be 10mA maximum current drain (source) or 25mA (sink).
- Maximum 4-module of I2C to Parallel Converter can be arranged and controlled in-line I2C-bus communication.
- Available test programs in C language (CodeVisionAVR) for sample
- Compatible with a variety of microcontroller and microprocessor systems.
- Dimensions: 6.2 cm (P) x 3.3 cm (L) x 1.5 cm (T)

NXP LPC-MT-2106

NXP LPC-MT-2106
DEVELOPMENT BOARD FOR LPC2106 ARM MICROCONTROLLER


FEATURES
  • MCU: 16/32 bit LPC2106 with 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
  • JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
  • 14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
  • RS232 interface circuit with SUB-D 9 pin connector
  • LCD16x2 display
  • five buttons
  • Dallas iButton port
  • Frequency input
  • Relay with 10A/250VAC contacts
  • Buzzer
  • Status LED
  • RESET circuit
  • RESET button
  • Bootloader enable jumper and pullup
  • DEBUG jumper for JTAG enable/disable
  • RTCK pullup resistors
  • Power plug-in jack
  • Power supply: 6VAC/+9VDC
  • Three on board voltage regulators 1.8V, 3.3V and 5V
  • Power supply filtering capacitor
  • Four mounting holes
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions: 120x38 mm (4.75x1.5")

NXP LPC-L2294-8MB

NXP LPC-L2294-8MB
DEVELOPMENT PROTOTYPE BOARD WITH 8MB SRAM, 4MB FLASH, CAN, RS232, ETHERNET, SD/MMC


FEATURES
  • MCU: LPC2294 16/32 bit ARM7TDMI-S™t with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • 8MB (2Mx32bit) 70 ns K1S321611 SRAM
  • 4MB (2Mx16bit) 70ns TE28F320C3BD70 C3 INTEL FLASH
  • Ethernet controller with CS8900A and RJ45 connector (16bit mode with interrupt)
  • RS232 port
  • UEXT connector
  • CAN drivers and connector
  • SD/MMC card connector
  • All LPC2294 port signals available on extension coonectors
  • RESET circuit with exterman control of Philips ISP utility via USB-RS232 virtual port
  • Jumpers for boot select from external memory
  • Jumpers for ISP/RUN mode
  • 1 user button
  • RESET button
  • Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
  • FR-4, 1.5 mm, red soldermask, component print
  • Dimensions: 118 x 101 mm ( 4.65 x 3.97")