DT-SENSE Photoreflector V2

DT-SENSE Photoreflector V2 is a smart sensor modules that can be used to detect object / line color (light colored lines with a dark background or vice versa). The module is capable of learning to differentiate paths and backgrounds and able to adapt to changes in ambient light. Sensor module is equipped with a TTL UART and I2C interface. Examples of applications DT-SENSE Photoreflector V2 among other line tracking / following, robot navigation, obstacle detection, or other applications that use pronsip light reflections.

To be noted:

DT-SENSE Photoreflector V2 uses a different sensor from version 1. The part that changed was the DT-SENSE Firmware and Hardware Photoreflector Photoreflector Sensor DT-SENSE.

This makes version 2 are not compatible with version 1, and vice versa. DT-SENSE photoreflector version 1 can not be used with DT-SENSE Photoreflector Sensor version 2. DT-SENSE Photoreflector version 2 can not be used with DT-SENSE Photoreflector Sensor version 1.

Specifications:

• Based microcontroller designed specifically to be able to process data from the 8 photoreflector infrared sensor module.
• Can receive input from the 8 photoreflector infrared sensor module.
• Path I / O voltage levels are compatible with TTL and CMOS.
• Equipped with the interface:
• UART TTL (baud rate of 38,400 bps)
• I ² C (bit rate up to 100 kHz)
• 8 pieces Photoreflector DT-SENSE can work on one communication path I ² C.
• Optimal distance to the object sensor / track about 4-6 mm.
• Available 500K Ohm Potentiometer for setting the sensor output on DT-SENSE Photoreflector Sensor V2.
• The maximum sampling rate of 250 Hz sensor.
• Power supply source using a voltage 9-12 VDC through voltage regulator or 4.8 to 5.4 VDC without a regulator.
• There are examples of applications and calibration readings DT-SENSE Photoreflector V2 with I ² C interface-based DT-AVR Low Cost Micro System using C language (CodeVisionAVR ©).
• Photoreflector module: 8.5 cm  x 6.9 cm  x 1.6 cm 
• sensor module v2 (include white connector): 5.2 cm  x 1.2 cm  x 1.6 cm 

Equipment:

• 1 piece DT-SENSE Photoreflector V2.
• 1 set of DT-SENSE Photoreflector Sensor V2 (4 pcs Sensors and connecting cable).
• 1 piece DVD that contains a collection of manuals, schematics, testing procedures, support programs

Photoreflector Sensor V2

Photoreflector Sensor V2 is photoreflector sensor modules that work based on the presence or absence of light reflection. Besides being used as a sensor in the module DT-SENSE Photoreflector V2, A sensor module can also be used with a variety of other microcontroller system, and can be used for a variety of other applications berbgai such as line tracking / following robot, obstacle detection, robot navigation, and other so on.

specifications:

• Requires +5 Volt DC power supply (VCC).
• Consists of a transmitter and receiver LED-NPN phototransistors Silizium-(SFH 300).
• Optimal distance sensor to object about 4-6 mm.
• Available 500K Ohm Potentiometer for setting the sensor output.
• LD pin 1/HIGH need logic (+5 V) to activate a red LED beam.
• VO will pin logic 1/HIGH (approximately +5 V) if the sensor SFH 300 receives the reflected light from the red LED.
• Compatible with DT-AVR Low Cost Series and DT-51 Low Cost Series as well as a wide range of microcontrollers and other microprocessors.
• sensor module (include white connector): 5.2 cm x 1.2 cm  x 1.6 cm 
• connecting cable: 15 cm 

equipment:

• 1 piece DT-SENSE Photoreflector Sensor V2.
• 1 piece connecting cable.
• 1 piece DVD that contains a collection of manuals, schematics, testing procedures, support programs

SUNYUAN VA2405S-2W DC to DC Converter

SUNYUAN VA2405S-2W 

IC DC to DC converter input voltage of 12VDC to +5 VDC output and dual-5VDC with the ability to pass the output current of 200mA. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

specifications:

• Input voltage: 12VDC.
• Output voltage: 12VDC.
• Flow Output: 200mA.
• Power Output: 2W
• Efficiency: 75%.
• Conversion method: Switching 125K Hz.

SUNYUAN WRB1212D-5W DC to DC Converter

SUNYUAN WRB1212D-5W 

DC to DC converter IC from 12VDC to 12VDC input voltage with the ability to pass the output current of 420mA. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

specifications:

• Input voltage: 12VDC (range 9-18 VDC).
• Output voltage: 12VDC.
• Flow Output: 420mA.
• Power Output: 5W.
• Efficiency: 82%.
• Conversion method: Switching 250K Hz.
• It has been equipped with short circuit protection.

SUNYUAN DKW5-12S12 DC to DC Converter

DC to DC converter IC from 12VDC to 12VDC input voltage with the ability to pass the output current of 417mA. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC. This IC has a 24-pin DIP package.

specifications:

• Input voltage: 12VDC.
• Output voltage: 12VDC.
• Flow Output: 417mA.
• Power Output: 5W
• Efficiency: 80%.
• Conversion method: Switching 400K Hz.
• It has been equipped with over current and short circuit protection.

DT-SENSE UltraSonic Ranger (USR)

DT-SENSE Ultrasonic Ranger (USR) is a distance measuring module is non-contact so easily connected with a variety of microcontroller-based systems. The process triggers (trigger) and read the measurement data with the DT-SENSE Ultrasonic Ranger only need 1 piece pin microcontroller. Examples of the use of DT-SENSE Ultrasonic Ranger is for intelligent robot, smart vehicle, automatic doors, security systems, distance measuring objects, and so forth.

specifications:

• Distance range: 2 cm to 3 m.
• Burst Frequency: 40 kHz - 16 Vpp signal box.
• No dead zone (no blank spots between 2 cm to 3 m.
• Having interface Pulse Width / Pulse Width.
• Rapid measurement cycle.
• Readings can be done every 25 ms (40 Hz rate).
• Trigger Input: TTL negative pulse, 20 us (at least).
• There are LED indicators that show activity sensor.
• Requires no delay before the next measurement.
• There is an example program using C language for microcontroller AVR AT90S2313 and language BASIC for the MCS-51 microcontroller.
• Requires 5 VDC voltage source.
• Current consumption of around 17 mA (typical).
• Dimensions: 5.5 cm  x 3 cm  x 2 cm 

Equipment:

• 1 piece DT-SENSE Ultrasonic Ranger (USR).
• 1 piece DVD that contains a collection of manuals, schematics, testing procedures, support programs

SUNYUAN DW5-12S12 DC to DC Converter

SUNYUAN DW5-12S12

DC to DC converter IC from 12VDC to 12VDC input voltage with the ability to pass the output current of 417mA. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

Specifications:

• Input voltage: 12VDC.
• Output voltage: 12VDC.
• Flow Output: 417mA.
• Power Output: 5W
• Efficiency: 80%.
• Conversion method: Switching 400K Hz.
• It has been equipped with over current protection.

SUNYUAN DW5-24S05 DC to DC Converter

SUNYUAN DW5-24S05

DC to DC converter IC from 24VDC input voltage to 5VDC with the ability to pass the output current of 1A. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

specifications:

• Input voltage: 24VDC (range 18-36 VDC).
• Output voltage: 5VDC.
• Output currents: 1A.
• Power Output: 5W
• Efficiency: 75%.
• Conversion method: Switching 400K Hz.
• It has been equipped with over current protection.

SUNYUAN DW10-24S05 DC to DC Converter

SUNYUAN DW10-24S05 

DC to DC converter IC from 24VDC input voltage to 5VDC with the ability to pass the output current of 2A. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

specifications:

• Input voltage: 24VDC (range 18-36 VDC).
• Output voltage: 5VDC.
• Flow Output: 2A.
• Output Power: 10W
• Efficiency: 79%.
• Conversion method: Switching 300K Hz.
• It has been equipped with over current and short circuit protection.

SUNYUAN DW20-24S05 DC to DC Converter

SUNYUAN DW20-24S05

DC to DC converter IC from 24VDC input voltage become 5VDC with the ability to pass the output current of 4A. IC DC-DC conveter has been labeled isolated input to output isolation voltage up to 1500VDC.

specifications:

• Input voltage: 24VDC (range 18-36 VDC).
• Output voltage: 5VDC.
• Flow Output: 4A.
• Output Power: 20W
• Efficiency: 81%.
• It has been equipped with over current protection.