Wednesday, October 26, 2016

BLE Nano with MK20 USB board

BLE Nano is a module-based Bluetooth Low Energy Nordic nRF51822 microcontroller chip (SoC ARM Cortex-M0 + BLE) with a speed of 16 MHz. BLE is also equipped Nano USB MK20 board that acts as a USB dongle once 5V to 3.3V regulator for the power supply BLE Nano.
This module is perfect when applied to areas of IOT, since this module is compatible with the device - mobile or desktop devices.

compatibility:
- Mobile: iOS (iOS 7), Android (Android version 4.3 and later), Windows Phone (version 8.1)
- Desktop: Windows 8.1, MacOS 10.9.2, Linux (with dukungn BlueZ 5.1)

Specs

  • Power supply 1.8V to 3.3V
  • Working frequency 2.4 GHz
  • Serial interface, I²C, SPI, USB
  • Bluetooth 4.0 Low Energy class
  • Distance jangkuan 10 m (optimal)

Temperature Sensor TPS-10

An artificial temperature detection sensors Robotis ideal when paired to the robot - made robot Robotis, like Robotis Dream, Robotis Mini, Robotis Premium, and Robotis STEM.

specifications:
- Power Supply: 3.3 V
- Temperature range: -20 ° C ~ 120 ° C
- Ability Waterproof: Yes
- Controller: CM-150, CM-200, CM-510, CM-530, OpenCM9.04
- Compatibility: Robotis Dream, Robotis Mini, Robotis Premium, and Robotis STEM
- Dimensions: 1 meter (including cables)


Note: Rivet on Robotis DREAM Kit can be used to integrate sensors into the robots

Turbine Meter Liquid Flow Sensor

A sensor detecting the flow of water. The sensor has a plastic valve that is equipped with a rotor and a hall-effect sensor to read the direction of water flow. This sensor is compatible with wifi module ESP8266, but must add as Schmitt Trigger IC NE555 first.

specifications:
- Power Supply: = 24V @ 15mA (5V @ 10mA)
- Signal Type: NPN Square Frequency
- Compatibility: Pipe 1.2 "NPS DN15
- Working Pressure: 1.75 MPa
- Working temperature: = 80 ° C
- Reach Humanity: 35% ~ 90% RH
- Measurement Range: 1-30 L / min
- Accuracy: ± 2%
- Dimensions: 54 x 25 mm
- Material: Plastic transparent

e-Health Sensor Platform V2.0 for Arduino and Raspberry Pi

E-Health Sensor Platform V2.0 is a shield / module add-ons that allow Arduino and Raspberry Pi users to perform applications of biometrics and medical on the human body using 10 different kinds of sensors (sensor pulse, blood oxygen (SpO2), air flow (respiratory), body temperature, electrocardiogram (ECG), glucometer, galvanic skin response (GSR), blood pressure (sphygmomanometer), the position of the patient (accelerometer) and muscle / eletromyography sensor (EMG)).
Output sensor readings can be used to monitor a patient's condition in real-time or it can also function as a diagnostic data for medical kepentingn.
Information - obtained biometric information can be sent wirelessly via 4G connectivity, 3G, GPRS, Bluetooth, and ZigBee.

specifications:
- Microcontroller: Atmega 328
- RAM: 2 Kb
- Memory Flash: 32 Kb
- Socket UART: 1
- Support Sensor: Sensor pulse, blood oxygen (SpO2), air flow (respiratory), body temperature, electrocardiogram (ECG), glucometer, galvanic skin response (GSR), blood pressure (sphygmomanometer), the position of the patient (accelerometer) and muscle / sensor eletromyography (EMG)
- Supported Operating Systems: Android and iOS
- Supported Connectivity: 4G, 3G, GPRS, Bluetooth, and ZigBee


MPX4115A absolute pressure sensor

MPX4115A an altimeter / barometer absolute pressure sensor is packaged in a 6-pin SIP components. These sensors have been integrated with op amp circuits on-chip bipolar and thin film resistor to produce a high-level analog signal output and optimal temperature compensation.

specifications:
- Pressure Type: Absolute
- Sensitivity: 45.9mV / kPa
- Working Pressure: 15-115 kPa
- Power Supply: 5 V
- Working temperature: -25 - 125 ° C
- Error rate: 1.5% (max)
- Response Time: 1 ms
- Packaging: SIP
- Number of Pin: 6 Pin

GSM GPRS A6 Module

A GPRS module which can be used to communicate with a wireless data transfer speeds of up to 85.6 Kbps (downlink) / 42.8 Kbps (uplink). This module is able to work at 4 modes bands of tissue, ie 850/900/1800/1900 MHz. With the features of this module is ideal when applied to the industry, PDAs, automotive, smart metering, and other fields similar.

specifications:
- Power Supply: 3.3 - 4.2 V
- Flow Standby: <3 ma="" p="">
- Ribbon Network: Quad-band 850/900/1800/1900 MHz
- Class GPRS: Class 10
- Sensitivity: <- 105="" p="">
- Data Transfer Speed: 85.6 Kbps (downlink) / 42.8 Kbps (uplink)
- Working temperature: -30 - 80 ° C
- Interface: SIM / USIM, UART, Analog audio interface, 2 channels (1 channel built Class AB audio amplifier), and RTC
- Dimensions: 22.8 × 16.8 × 2.5 mm
- Certificate ROHS, FCC, CE, and CTA
- Supports voice calls
- Supports text messages (SMS)
- Supports command GSM07.07,07.05 standard AT commands and orders additional Ai-Thinker.

Water-drop Rain Drop Sensor

Rain sensor is detecting the voltage of 5 V and a current of 100 mA, so it can be used directly for triggering components such as buzzer output, relay, small fan, etc.

specifications;
- Power Supply: 5 V
- Output Current: 100 mA
- Output Signal: TTL
- Sensitivity: Can be customized according to the needs of the potentiometer
- Equipped with LED indicator
- Sensor and control panel are separated for optimal performance
- Control Panel Dimensions: 30 x 16 mm
- Sensor Dimensions: 54 x 40 mm

ESP-12F ESP8266 Wifi Board

Wifi module is an MCU bertenagakan Tensilica L106 low-power 32-bit 80 MHz -160 MHz speed, RTOS support, and integrated Wi-Fi MAC / BB / RF / PA / LNA, and an antenna on-board. This module works at a frequency of 2.4 GHz and supports wireless networking standards 802.11 b / g / n.

specifications:
- Power Supply: 3.0 - 3.6 V
- Current: 80 mA
- Power Consumption:> 0.1 mW
- Network Standard: 802.11 b / g / n
- Microcontroller: Tensilica L106-speed 32-bit 80 MHz -160 MHz
- Working Frequency: 2.4 GHz
- Strengthening Output Power: 20 dBm
- Mode Network Security: WPA / WPA2
- Interface: HSPI, UART, I²C, I²S, PWM and GPIO
- Supports Real Time Operating System (RTOS)
- Equipped with 10-bit ADC
- Equipped with network protocol TCP / IP
- Supports upgrade via AT and OTA
- Supports STA / mode AP / STA + AP
- Supports smart configuration functions (including Android and iOS)
- Equipped with sleep mode to save power


Photoreflector Ver 2.0

Photoreflector V2 is an intelligent sensor modules that can be used to detect objects / bands of color (light colored lines with a dark background or vice versa). This module is able to learn to distinguish the lines and backgrounds, and able to adapt to changes in ambient light. The sensor module is equipped with a TTL UART and I2C interface. Examples of applications  Photoreflector V2 among others to line tracking / following, robot navigation, obstacle detection, or other applications that use pronsip light reflection.

specifications:
- Based microcontroller specifically designed to be able to process data from the 8 modules photoreflector infrared sensor.
- To receive input from the 8 modules photoreflector infrared sensor.
- Path I / O is compatible with TTL and CMOS voltage levels.
- Equipped with the interface:
- UART TTL (baud rate of 38400 bps)
- I²C (maximum bit rate of 100 kHz)
- 8 pieces Photoreflector can work on one I²C communication lines.
- The optimal distance sensor for object / lane about 4-6 mm.
- There 500K Ohm potentiometer for setting the sensor output at Photoreflector Sensor V2.
- The maximum sampling rate of 250 Hz sensor.
- Sources of power supply using voltage 9-12 VDC through a regulator or a voltage 4.8 to 5.4 VDC without going through the regulator.
- There are examples of applications reading and calibration of  Photoreflector V2 with I²C interface based  Low Cost Micro System using C language (CodeVisionAVR ©).


Equipment:
- 1 piece  Photoreflector V2.
- 1 set  Photoreflector V2 Sensor (4 pcs Sensor and connecting cable).

siglent SDS 1204CFL 4 Channel 200MHz Digital Storage Oscilloscope

SIGLENT SDS1204CFL

SIGLENT SDS1204CFL Digital Oscilloscope is a compact desktop four-channel digital oscilloscope with a 200MHz bandwidth. 7-inch TFT color liquid-crystal display of the oscilloscope ensures bright and vivid waveform representation and backlit buttons ensure user comfort. 24 K memory allows storing up to 20 waveforms and 20 setups. SIGLENT SDS1204CFL has a multi-language user interface and online help.
SIGLENT SDS1204CFL Digital Oscilloscope is a good choice for industrial control and measurements, R&D, electronic circuit design and testing and all other applications involving testing and troubleshooting, as well as education and training.

FEATURES:

Model
  • Bandwidth: 200MHz.
  • 4 channels + 1 external triggering channel.
  • Real-time sample rate: 2 GSa/s (single channel) / 1 GSa/s (dual channels) .
  • Equivalent sample rate: 50 GSa/s.
  • Memory: 24 K.
  • Vertical sensitivity range: 2 mV/div – 5 V/div.
  • Versatile trigger modes: Edge, Pulse, Slope, Video and Alternate.
  • Unique digital filter and data recorder function.
  • 7" TFT color LCD, bright and vivid waveform display.
  • USB Host, USB Device, RS-232.
  • Pass/Fail Output.
  • Multi-language display (12 languages): English, French, Spanish, Portuguese, German, Italian, Russian, Arabic, Japanese, Korean, Simplified Chinese, Traditional Chinese.
  • Online help.
  • Safety standards: EMC: EN61326; LVD: EN61010-1.
  • Compact design for saving desktop space.

SPECIFICATIONS :

ModelSDS1072/1074CFLSDS1102/1104CFLSDS1202/1204CFLSDS1302/1304CFL
Bandwidth70MHz100MHz200MHz300MHz
Channels2/4CH+1EXT
Real time sampling rate1GSa/s(each channel), 2GSa/s(half channel)
Equivalent sampling rate50GSa/s
Memory depth12K(each channel), 24k(half channel)
Rise time< 5ns< 3.5ns< 1.7ns< 1.2ns
Input impedance1MΩ‖13pF1MΩ‖13pF, 50Ω
Time base range5.0ns/div-50s/div2.5ns/div-50s/div2.5ns/div-50s/div1.0ns/div-50s/div
Scan: 100ms-50s/div
Vertical sensitivity2mV - 5V/div
Vertical resolution8bit
Trigger sourceCH1, CH2, CH3, CH4, Ext, Ext/5, AC Line
Trigger typesEdge, Pulse, Video, Slope, Alternative
Math Operation
+, -, ×, ÷, FFT
Digital filterHigh pass, Low pass, Band pass, Band Stop
Max input voltage±400V(DC+ACPk-Pk), CAT I, CAT II
Internal storage
2/4 groups of reference waveform, 20 groups of settings, 20 groups of waveforms
External storage
Bitmap save, CSV save, Waveform save, Setting save
Language
English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian, Arabic
Interface
Double USB Host, USB Device, LAN, Pass/Fail out
Display
7’’color TFT-LCD
Power
AC 100-240V, 45Hz-440Hz, 50VA Max
PC software
Can through the computer remote control oscilloscope, extraction waveform analysis data
Remark
With original source seamless connection, form signal collection, produce integration system

PACKAGE CONTENTS:

  • Digital oscilloscope unit (1 pc.)
  • Probe (1:1, 10:1) Problex (4 pc.)
  • Power cord (1 pc.)
  • USB cable (1 pc.)
  • EasyScope 3.0 Computer Software System (1 pc.)
  • EasyDsoLib software package (1 pc.)
  • User Manual (1 pc.)