A20-OLinuXIno-LIME2

OPEN SOURCE HARDWARE EMBEDDED ARM LINUX SINGLE BOARD COMPUTER WITH ALLWINNER A20 DUAL CORE CORTEX-A7 1GB RAM AND GIGABIT ETHERNET

FEATURES

• Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU
• 1GB DDR3 RAM memory
• SATA connector with 5V SATA power jack
• HDMI connector with FullHD support (1080p)
• 2 x USB High-speed host with power control and current limiter
• USB-OTG with power control and current limiter
• 1000MBit native Ethernet
• LiPo Battery connector with battery-charging capabilities
• LCD row of pins (0.05'' step)
• 160 GPIOs on four GPIO rows of pins (0.05'' step)
• MicroSD card connector
• DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
• GPIO LED
• Battery charge status LED
• Power LED
• 2KB EEPROM for MAC address storage and more
• 3 BUTTONS with ANDROID functionality + RESET button
• 4 mount holes
• 5V input power supply, noise immune design
• PCB dimensions: 84x60 mm

A20-OLinuXino-LIME

OPEN SOURCE HARDWARE EMBEDDED ARM LINUX SINGLE BOARD COMPUTER WITH ALLWINNER A20 DUAL CORE CORTEX-A7

A20-OLinuXino-LIME is a very compact (84x60)mm Linux open source hardware computer.

FEATURES

• Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU
• 512MB DDR3 RAM memory
• SATA connector with 5V SATA power jack
• HDMI connector with FullHD support (1080p)
• 2 x USB High-speed host with power control and current limiter
• USB-OTG with power control and current limiter
• 100MBit native Ethernet
• LiPo Battery connector with battery-charging capabilities
• LCD connector compatible with with 4.3", 7.0", 10.1" LCD modules from Olimex
• 160 GPIOs on four GPIO connectors
• MicroSD card connector
• DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
• GPIO LED
• Battery charge status LED
• Power LED
• 2KB EEPROM for MAC address storage and more
• 3 BUTTONS with ANDROID functionality + RESET button
• 4 mount holes
• 5V input power supply, noise immune design
• PCB dimensions: 84 x 60 mm

iButton MICRO CAN DS1990A-F5

IButton data storage module that is capable of performing 64-bit encryption of the data to be stored.

specifications:
- Power supply: 2.8 ?? 6.0 V.
- 1-wire interface.
- 64-bit registration number (lasered / ROM).
- Read time: <5 ms.="" p="">- Package: MicoCAN F5 iButton.
- Application: Can be used for storage of ID as access control, guard tour or data logger application.
- Requires device as a media reader to read or write the data (DS9092)

What Is an iButton Device?

The iButton® device is a computer chip enclosed in a 16mm thick stainless steel can. Because of this unique and durable container, up-to-date information can travel with a person or object anywhere they go. The steel iButton device can be mounted virtually anywhere because it is rugged enough to withstand harsh environments, indoors or outdoors. It is small and portable enough to attach to a key fob, ring, watch, or other personal items, and be used daily for applications such as access control to buildings and computers, asset management, and various data logging tasks.

What Can I Do with the iButton Device?

The iButton device is ideal for any application where information needs to travel with a person or object. Affixed to a key fob, watch, or ring, an iButton device can grant its owner access to a building, a PC, a piece of equipment, or a vehicle. Attached to a work tote, it can measure processes to improve efficiency, such as manufacturing, delivery, and maintenance. Some iButton devices can be used to store electronic cash for small transactions, such as transit systems, parking meters, and vending machines. The iButton device can also be used as an electronic asset tag to store information needed to keep track of valuable capital equipment.

DS9092L iButton Probe with LED

The DS9092L iButton® probe with LED provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton's MicroCan™ package. The solid metal contacts resist wear and are easy to keep clean.

The DS9092L has no moving parts, making it a rugged interface for harsh environments. The round center contact of the DS9092L houses the LED that is rated for maximum 20mA DC at 2.7V typical.

The probe comes with a brass M18 x 1 nut for panel mounting. Since the body of the probe also forms the ground contact, the panel should be of non-conducting material to avoid ground loops. The 30cm cable with connector is provided for easy connection to the system microcontroller.

Key Features

• Solid metal read/write panel-mount probe for the iButton family
• Integrated green LED for user-feedback signaling
• Probe guides the entry of the iButton
• iButton slides over the surface to self-clean contacts
• Accessible shallow probe cavity simplifies removal of debris such as mud
• Probe suited for panels of up to 3mm thickness
• Contacts are made from solid 303 stainless steel with a blue nylon insulation
• Metric design, prewired for easy installation

DEKKO UT330 Ultrasonic Thickness Gauge

DEKKO UT330 Ultrasonic Thickness Gauge

Features:

• Auto Calibration to assure accuracy
• Auto linear compensation
• Quick adjustment
• Coupling status indication
• 10 thickness measuring storage, and recall function
• 12 sound velocity for different material
• Low battery indication
• More than 10, 000 time long lift key
• Special memory that retains all of its setting even when the power is off

Specification :

• Display : 4 digital LCD
• Minimum Display : 0.1 mm
• Work Frekuency : 5 Mhz
• Measuring Range : 1.2mm to 300.0 mm on steel
• Minimum Limit tube measuring : ¦ 20 x 3 mm steel
• Accuracy : ± 1% + 0.1mm
• Sound velocity range : 1, 000 to 9, 900 m/ s
• Operating temperature : 0º C to 40º C
• Power Supply : 3 x 1.5Volt AAA Battery
• Size : 70.0 x 145.5 x 28mm

DEKKO 230 Ultrasonic Thickness Gauge

DEKKO 230 Ultrasonic Thickness Gauge

Features:

• Auto Calibration to assure accuracy
• Auto linear compensation
• Quick adjustment
• Coupling status indication
• 10 thickness measuring storage, and recall function
• 12 sound velocity for different material
• Low battery indication
• More than 10, 000 time long lift key
• Special memory that retains all of its setting even when the power is off

Specification :
Display : 4 digital LCD
Minimum Display : 0.1 mm
Work Frekwency : 5 Mhz
Measuring Range : 1.2mm to 225.0 mm on steel
Minimum Limit tube measuring : ¦ 20 x 3 mm steel
Accuracy : ± 1% + 0.1mm
Sound velocity range : 1, 000 to 9, 900 m/ s
Operating temperature : 0º C to 40º C
Power Supply : 3 x 1.5Volt AAA Battery
Size : 70.0 x 145.5 x 28mm

DEKKO MT160 Ultrasonic Thickness Gauge

DEKKO MT-160 Ultrasonic Thickness Gauge

Overview

• Capable of performing measurements on a wide range of material
• Including metals
• Plastic
• Ceramics
• Composites
• Epoxies
• Glass and other ultrasonic wave well-conductive materials

Specification

• Display : 4.5 digits LCD with EL backlight.
• Measuring Range : 0.75^ 300mm ( in Steel) .
• Sound Velocity Range : 1000~ 9999 m/ s.
• MT160 : 0.1/ 0.01mm
• Accuracy : ± 0.5% Thickness + 0.04mm, depends on materials and conditions
• Units: Metric/ Imperial unit selectable.
• Four measurements readings per second for single point measurement, and ten per second for Scan Mode.
• Memory for up to : 20 files ( up to 99 values for each file) of stored values.
• Power Source : Two “ AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time ( EL backlight off) .
• Communication : RS232 serial port.
• Outline dimensions : 150× 74× 32 mm.
• Weight : 245g

NuEdu-SDK-NUC240

Development Board for NUC240 microcontroller (ARM Cortex M0). This board is suitable for the manufacture of products in the prototype that uses a microcontroller NUC240. This board has been integrated with Nu-Link ME module for charging process program code via ICP. About the programming language / compiler, this board can be programmed using the C programming language with the help of software EWARM IAR, Keil RVMDK, or CooCox CoIDE. This board is also equipped with a header that is compatible with the Arduino making it easier to connect with various Arduino shield.

specifications:

- Power supply: 5VDC

- Integrated with microcontroller NUC240.

- Have a Programmer / Debugger internal (Nu-Link-Me).

- Completion of the program code can be via USB ICP (Nu-Link-Me).

- Sales Package: 1x NuEdu-SDK-NUC472, 1x NuEdu-Basic 01, Nu-Bridge 1x, 1x USB cable and 1x CD manual

NuEdu-SDK-NUC472

NuEdu-SDK-NUC472 a microcontroller development board for NUC472. Users can use NuEdu-EVB-NUC472 to develop and test the application program with ease.

specifications:

-Catu Power: 5VDC

-based Microcontroller / microprocessor NUC472 (ARM Cortex-M4)

-Support EWARM IAR or Keil RVMDK

-Have A header that is compatible with the Arduino so that it can be connected to an Arduino shield

-Terintegrasi Ethernet port 10/100 Mbps

-Support On-line debugger

-Sudah Integrated with Nu-Link-Me so that you no longer need an external programmer

-Package Sale: 1x NuEdu EVB NUC472, 1x NuEdu-Basic 01, Nu-Bridge 1x, 1x USB cable and 1x CD manual

FROG 3D inlay

Frog 3D tags and inlays are designed for pallet and case level applications offering high performance in supply chain management applications.

Frog 3D products have a small, cost-efficient True3D form factor with complete orientation insensitivity providing consistent performance even on challenging materials. High performance Frog 3D inlays deliver excellent read range and are compatible with the Impinj Monza 4 QTTM technology.

Frog 3D tags and inlays are produced using leading edge inlay assembly technologies. Monitoring every step in the production process, from the antenna to the final assembly of the inlay, guarantees optimal quality products.

Overview

• Operating Frequency: 860 - 960 MHz
• Integrated Circuit (IC): Impinj Monza 4
• Antenna Size :50 x 50 mm (1.97 x 1.97 in)
• Die-cut Size :53 x 53 mm (2.09 x 2.09 in)
• Quality Assurance :100% performance tested
• International Standards :EPC Class 1 Gen 2 , ISO 18000-6C

Benefits

• True3D design with complete orientation insensitivity.
• Consistent and robust performance on various materials globally.
• Available in a small and cost-effective form factor.
• Monza 4 QTTM technology capability.
• Possibility for different memory options: EPC from 128 bit to 496 bit and user memory from 32 bit to 512 bit.
• ISO 9001:2008 Quality Management System and ISO 14001:2004 Environment Management System support.