Tuesday, February 10, 2015

TLP250 Photocoupler

Photocoupler GaAlAs IRED & photo-IC for IGBT / power MOSFET gate driving.

specifications:
- Input threshold: If = 5mA (max).
- Supply: Vcc = 10-35V, Icc = 11mA (max).
- Output: Io = 1.5A (max).
- Switching time: 1.5 us (max).
- Isolation voltage: 2500 Vrms (min).
- Package: 8-pin DIP.

MG50Q2YS50 Silicon N Channel IGBT

Silicon N Channel IGBT by: TOSHIBA

specifications:
- Vces: 1200V (max)
- Vges: ± 20V
- Ic: 156a @ 1ms
- If: 100A @ 1ms
- Collector power dissipation (Pc): 400W (max rating)
- Isolation voltage: 2500V (max rating)
- Reverse recovery time: 0.25μ s

IRGPS60B120KDP

INTERNATIONAL RECTIFIER - IRGPS60B120KDP - SINGLE IGBT, 1.2KV, 105A


IGBT which has been equipped with ultrafast soft recovery diode. IGBT is suitable for motor drivers.

specifications:
- Vce Max: 1200V
- Vce on: 2,75V
- Ic Max: 105A
- Ic pulse: 250A
- Max Power: 595W
- Packaging: TO-274AA

IR2184 Half Bridge Driver

Half Bridge Driver for Power CMOS or IGBT driver

specifications:
- Can move Power CMOS or IGBT with voltage up to 600V
- Input Logic 3.3V or 5V
- Supply 10V â € "20V
- Output source current 1,4A
- Output sink current 1,8A
- Package PDIP-8

IR2111 Half-Bridge Driver



IR2111 Half-Bridge Driver. serves to control the MOSFET or IGBT
Specs:
- Power supply: 20 VDC (max)
- Input voltage logic: Vcc (max)
- Offset voltage: 600V (max)
- High output current: 250mA (typ)
- Low Output current: 500mA (typ)
- Propagation delay turn-on: 950ns (max)
- Propagation delay turn-off: 180ns (max)
- Packaging: 8-pin PDIP

HGTG30N60C3D IGBT Transistor N Channel

Fairchild, HGTG30N60C3D, IGBT Transistor N-channel, 63 A 600 V, 3-Pin TO-247

The Insulated Gate Bipolar Transistor or IGBT is a three-terminal power semiconductor device, noted for high efficiency and fast switching. The IGBT combines the simple gate-drive characteristics of the MOSFETs with the high-current and low–saturation-voltage capability of bipolar transistors by combining an isolated gate FET for the control input, and a bipolar power transistor as a switch, in a single device.


Specifications:
Channel TypeN
ConfigurationSingle
Dimensions15.87 x 4.82 x 20.82mm
Height20.82mm
Length15.87mm
Maximum Collector Emitter Voltage600 V
Maximum Continuous Collector Current63 A
Maximum Gate Emitter Voltage±20V
Maximum Operating Temperature+150 °C
Minimum Operating Temperature-40 °C
Mounting TypeThrough Hole
Package TypeTO-247
Pin Count3
Width4.82mm

HCPL-316J-000E optocoupler chip

Optocoupler which is equipped with Fault Status Feedback and desaturation to regulate the output voltage at the gate. This optocoupler has an output IGBT Gate Drive 2,5A ability (maximum). By using an additional circuit, then the output of the optocoupler is capable of controlling the maximum load current and voltage 1200V 150A.

specifications:
- Emitter voltage 4,5VDC - 5,5VDC
- Behind emitter voltage -
- Component output (transistor / triac) IGBT
- 15VDC output voltage (min) - 30VDC (max)
- Output current 2,5A
- 1230V isolation voltage (peak max)
- The switching speed of 500 ns
- Packaging SO-16

Fuji 1MBH60-100 IGBT Module

Insulated Gate Bipolar Transistor Fuji 1MBH60-100 which has a fast switching capability, high impedance gate and a low saturation voltage.

specifications:
- Power dissipation: 260 W
- Vces: 1000 V (max)
- Vce (sat): 15 V
- Vges: +/- 20 V
- Ic: 60 A

Thursday, February 05, 2015

1SHEELD SMART ARDUINO SHIELD

1SHEELD TURNS YOUR SMARTPHONE INTO A RE-CONFIGURABLE ARDUINO SHIELD

Basically, 1Sheeld consists of two parts. The first part is a shield that is physically connected to your Arduino board and acts as a wireless middle-man, piping data between Arduino and any Android smartphone via Bluetooth.

The second part is a software platform and app on Android smartphones that manages the communication between our shield and your smartphone and let your choose between different available shields.


AN ANDROID PLATFORM BRINGS ALL YOUR PHONE'S SENSORS TO THE HARDWARE EXPERIENCE

It is a simple two screens app. The first screen shows you a list of all of the available shields, you can select the shields you want and click next to go to the second screen. 

In this screen you’ll have all of your selected shields on the right and you can toggle between them. The shields using our library will not need any more configuration. Other shields relying on the pins of Arduino will need to be configured using the connect button on the shield screen.


Tech Specs
  • Uses a standard HC-06 Bluetooth adapter (Bluetooth 2.1)
  • Range up to 30 feet
  • Running on an Atmel ATMega162
  • 7.37 MHz operating frequency
  • Communicates with Arduino using UART
  • Communication baud rate 11,5200 b/s

Kinect for Xbox 360

Kinect for Xbox 360


Kinect brings games and entertainment to life in extraordinary new ways—no controller required. Easy to use and instantly fun, the Kinect sensor uses revolutionary full-body tracking to put you in the center of the fun. This amazing new technology allows the sensor to recognize your body and mirror your movements in the game, making YOU the controller.

  • Control your Xbox 360 with a single gesture or wave of the hand
  • Connect with friends and family with easy and interactive gameplay, video chat, and more*
  • Works alongside your Xbox 360 controller to enhance your entertainment
  • Includes Kinect Adventures game, in which you are the controller as you jump, dodge and kick your way through exciting adventures set in a variety of exotic locations
  • Get off the couch and into the game by using your body as the controller
  • Revolutionary technology includes body recognition
  • Compatible with every Xbox 360**