AVR-USB-STK

AVR USB AT90USB162 MICROCONTROLLER DEVELOPMENT BOARD WITH USB AND ICSP

AT90USB162 is the easiest way to add USB functionality to your next device, Atmel provides free open source HID (mouse, keyboard) and CDC (USB-to-RS232) code and on top of this AT90USB162's cost is same as that of ATMega16

The AVR-USB-STK board allows all USB features of AT90USB162 to be explored. The board has a USB connector, a Joystick, a RS232, a SD-MMC card, an Audio output, an ICSP connector and an extension connector. All AT90USB162 come from Atmel pre-programmed with bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from the Atmel web site and load your HEX code inside AT90USB162. To enter the bootloader mode you should press and hold the HWB button, then press and release the RST button. If you prefer to use the ICSP programmer, note that only AVR-ISP-MK2 supports AT90USB162 as there are pretty new devices. Probably AVR Dude will add support for them later, but for the moment you can't use AVR-PG1 or AVR-PG2 for ICSP programming. Another bad news is that AT90USB162 supports only debug Wire not JTAG so to debug it you should have the expensive AT-JTAGICE-MK2.

FEATURES

• AT90USB162 microcontroller with 16KB Flash, 512B RAM, 512B EEPROM
• ICSP 5x2 pin connector for in-circuit programming with AVR-ISP-MK2 (you generally don't need to use ICSP as you can program via USB)
• Debug Wire could be performed by 3 wires connected to ICSP (AT-JTAGICE-MK2 have such lose wire connector which to be used, you need VCC, GND, RST signals only)
• USB 2.0 Full speed connector
• RS232 driver and connector
• SD-MMC card connector
• Audio out 3.5 mm jack connector
• Extension connector with AVR port signals
• Status LED
• Joystick
• User button HWB (can be used to enter bootloader mode after reset)
• Reset button RST
• Takes power from USB no need for external adapter
• External power supply and voltage regulator if USB can't provide enough power
• Quartz crystal oscillator circuit 8Mhz
• Extension pin headers for each uC pin
• Four mounting holes 3.3 mm (0.13")
• Grid 100 mils
• GND bus
• Vcc bus
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions 100x80 mm (3.9x3.15")

MSAA502 Multi-purpose Adapter

The MSAA502 is a multi-purpose adapter that is used for eliminating ambient light or to provide a stable enhanced field of view at optimal working distance. Great for various applications such as checking the skin for dermatology or looking at a dogs ear for veterinarians. Simply place the Dino-Lite on top of the adapter and your ready to use.

• Long working distance models: 1.5cm x 1.0cm at 35X
• 200x capable models: 4cm x 3cm at 10X
• AM413TL-M40: 3cm x 2cm at 15X

Specifications

Model	MSAA502 Multi-purpose Adapter
Unit Weight	72(g)
Unit Dimension	12.5cm (H) x 8.5cm (D)

M = magnification rate      WD = working distance (without front cap)      FOV = field of view      DOF= depth of field      Unit = mm

Banana PI single-board computer

Banana PI is an Open Source hardware platform which was produced to run the Elastos.org open source OS among others. Banana PI a dual core, Android 4.2 product which is much better than the Raspberry Pi.

The Banana Pi hardware runs Android, Debian Linux, Ubuntu Linux, OpenSuse linux and images that run on the Raspberry Pi and Cubieboard.

Banana PI has a Gigabit Ethernet port and a SATA Socket. It can run with Android 4.2.2 smoothly. The size of Banana PI M1 is about the same size as a credit card,It can  easily run games as it supports 1080P high definition video output. The GPIO is compatible with Raspberry Pi and can run Raspberry Pi images directly.

Hardware specification 

• CPU: A20 ARM Cortexim-A7 Dual-Core
• GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.10 
• Memory (SDRAM)0 1GB DDR3 (shared with GPU)
• Onboard Storage: SD (Max. 64GB) / MMC card slot UP to 2T on 2.5 SATA disk 
• Onboard Network: 10/100/1000 Ethernet RJ45,optional WIFI
• Video Input+ : A CSI input connector allows for the connection of a designed camera module
• Video Outputs: HDMI, CVBS , LVDS/RGB
• Audio Output: 3 5 mm Jack and HDMI.
• Power Source: 5 volt via Micro USB(DC In Only) and/or Micro USB (OTG)4, 
• USB 2.0 Ports: 2 (direct from Allwinner A20 chip)+
• Buttons: Reset button: Next to Micro USB connector«. Power button: Next to Reset. button«. Boot button (Optional): Behind HDMI connector
• GPIO(2X 13) pin: GPIO,UART,I2C bus ,SPI bus with two chip selects: 4J CAN bus,ADC,PWM,+33v:+5v,ground.
• LED: Power Key & RJ454
• Remote:IR (Optional)+, 
• OS: Android 4.2,RaspbiamLubuntu:OpenSuse,Debiano 
• Product size: 92 min x 60mma 
• Weight: 48g 

STM32-P405 HEADER BOARD FOR STM32F405RGT6 ARM CORTEX M4 1024KB FLASH 168 MHZ 192KB SRAM

STM32-P405 HEADER BOARD FOR STM32F405RGT6 ARM CORTEX M4 1024KB FLASH 168 MHZ 192KB SRAM

The ARM Cortex-M4 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering an outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M4 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.

The STM32F405RGT6 performance line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-P4053 is a good start-up board for learning the new ST Cortex-M4 based microcontrollers STM32F405RGT6. It has RS232 and both USB and CAN. It also features a prototype area with all microcontroller signals near it, giving the customer an easy way to implement his own schematics and add-ons.

FEATURES

• MCU: STM32F405RGT6 ARM Cortex M4 1024KB FLASH 168 Mhz 192kB SRAM USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB connector
• CAN driver and connector
• RS232 driver and connector
• UEXT connector which allows different modules to be connected (as MOD-MP3, MOD-NRF24LR, etc)
• SD-MMC connector
• Backup battery connector
• RESET button
• Status LED
• Power supply LED
• On-board voltage regulator 3.3V with up to 800mA current
• Single power supply: takes power from USB port or power supply jack
• 8 Mhz crystal oscillator
• 32768 Hz crystal and RTC backup battery connector
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), red soldermask, silkscreen component print
• Dimensions: 100 x 90mm (3.94 x 3.5")

STM32-H405

HEADER BOARD FOR STM32F405RGT6 ARM CORTEX M4 1024KB FLASH 168 MHZ 192KB SRAM

The ARM Cortex-M4 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering an outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M4 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.

The STM32F405RGT6 performance line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-H405 is a good start-up board for learning the new ST Cortex-M4 based microcontrollers STM32F405RGT6. It has RS232 and both USB and CAN. It also features a prototype area with all microcontroller signals near it, giving the customer an easy way to implement his own schematics and add-ons.

FEATURES

• MCU: STM32F405RGT6 ARM Cortex M4 1024KB FLASH 168 Mhz 192kB SRAM USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 168Mhz
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB connector
• User button
• RESET button
• Status LED
• Power supply LED
• On board voltage regulator 3.3V with up to 800mA current
• single power supply: takes power from USB port or extension connector pin
• 8 Mhz crystal oscillator
• 32768 Hz crystal and RTC backup battery connector
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
• Dimensions: 61x 34mm (2.4 x 1.3")
• Distance between the exntension connectors: 25.4 mm (1")

STM32-405STK

STARTERKIT BOARD FOR STM32F405RGT6 CORTEX-M4 MICROCONTROLLER

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.

The STM32F405 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M4 CPU with an extensive range of peripheral functions and enhanced I/O capabilities.

STM32-405STK is a starter-kit board which allows you to explore all of STM32F405's capabilities. It has a NOKIA 3310 BW 84x48 LCD, buttons, a SD-MMC card, an Accelerometer, a 2.4Ghz RF transceiver, Audio Input and Output, and the power supply is made from single 1.5V AA cell battery.

FEATURES

• MCU: STM32F405RGT6 ARM 32 bit CORTEX M4™ with 1024KB FLASH 168 Mhz 192kB SRAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB mini connector
• LCD NOKIA 3310 BW 84x48 pixels
• 1.5V battery connector with step-up converter
• 3-axis accelerometer
• SD-MMC card
• 2.4 Ghz transciever with Nordic nRF23L01
• Audio input
• Audio output
• User buttions x2
• Joystick with 4 directions and push action
• UEXT connector for other Olimex's modules connection like MOD-MP3, etc.
• RESET button
• Status LED
• 8 Mhz crystal oscillator
• 32768 Hz crystal and RTC backup battery connector
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
• Dimensions: 90 x 65mm (3.5 x 2.5")

MSAA501 Tongue Depressor Attachment

Inspect the mouth with a tongue depressor. 

The MSAA501 attachment allows you to attach a disposable tongue depressor onto a Dino-Lite. With this accessory you can inspect and document the larynx and do other oral inspections. Simply attach the MSAA501 to the Dino-Lite and then insert a tongue depressor and you are ready to examine.

SPECIFICATIONS

Model	MSAA501 Tongue Depressor Attachment
Unit Weight	11(g)

COMPATIBILITY

Compatible with	"AM+4113TL"

MS25X Inspection XY Turntable

The MS25X inspection table assists you to move and inspect objects under the scope. You can move the MS25X rotatable plate in an X and Y axis with up to 24cm of diagonal movement and also have the ability to rotate the object 360 degrees.

The MS25X allows many ways to move things around. Use your fingers on the plate to rotate and move objects in an X - Y movement or use the attached handle for simple X - Y movements only, great for objects that are larger than the plate (18cm diameter). An additional accessory that will work great with the turntable is the MS36B desktop stand for the Dino-Lite; it provides stable imaging and adjustable clearance with its extendable arm and pole. The MS25X Dino-Lite inspection XY turntable is a helpful accessory to assist you in the delicate job of moving objects under the Dino-Lite microscopes.

Model	MS25X Inspection XY Turntable
Unit Weight	2.3(kg)
Unit Dimension	24cm (L) x 25cm (W) x 5cm (H)
Package Dimensions	29cm(L) x 29cm(W) x 8cm(H)

MS15X-S1 Compact sized XY+R inspection stage.

MS15X-S1 Compact sized XY+R inspection stage. 

Compact X and Y stage with attachable 360 degree rotating turntable. Smooth precision controls so you can easily and quickly examine small specimens with 6cm of X & Y movement and/or rotate 360 degrees. There is a vernier scale on both the X & Y axis in millimeters and inches, allowing you to navigate without estimating points of interest.

The MS15X-S1 can be attached to the base plate of an MS35 or MS36 precision desktop stand for additional support and control while using the Dino-Lite. The inspection stage compact size takes up minimal space by only taking up 10.5cm x 8cm of desk space, creating a precision space saving Dino-Lite inspection workstation.

Rotating base:

5cm Diameter

360 degree rotation

Specimen plate:

10.5cm (L) x 8cm (W)

6cm x 6cm X&Y movement

Vernier scale

Specifications

Model	MS15X-S1
Unit Weight	570(g)
Unit Dimension	14cm (L) x 8cm (W) x 6cm (H)
Package Dimensions	30.5cm (L) x 15cm (W) x 6.5cm (H)

MS23B Articulating Desktop clamp

MS23B Articulating Desktop clamp

The MS-23B articulating desktop clamp allows you to clamp a stand onto a tabletop or attach to any surface up to 3cm thick. The arm has a reach of 35cm allowing good distance and freedom to move the arm into flexible positions. The MS-23B gives you a convenient sturdy stand for the Dino-Lite with a space saving design to help you maximize the productivity with the Dino-Lite.

Specifications

Model	MS23B
Unit Weight	280(g)
Unit Dimension	35cm long reach
Package Dimensions	21cm (L) x17cm (W) x 6cm (H)