Thursday, November 28, 2013

Cubieboard simple case

This simple case makes the cubieboard look like a sandwich :)
Size: 10cmx6cm, acrylic.

item list
  • Top side x 1
  • Bottom side x 1
  • Screws x 12 + 4

150M usb wifi module

Small size but stable and good signal, RTL8188CUS/RTL8188EU chip, plug and connect on cubieboard(support hotplug on stock android).

Features:
  • Standard: IEEE 802.11b/g/n
  • Wireless speed: 150Mbps
  • Freq: 2.4GHz
  • Channels: 1-13
  • Power: 20dBm

Bread board for cubieboard

Bread board for cubieboard, Features of the breadboard:
  • Add a vga header on board
  • export the 2mm headers on cubieboard to 2.54mm headers
  • 1312 isolated cells vias with size 1.1mm/1.8mm 2.54mm pitch

Red Indoor Moving Sign


Moving Sign / LED Display with a width of 95 pixels (7 rows x 95 columns).
specifications:
- Power supply: 5VDC (adapter)
- Number of columns: 95 columns
- Number of lines: 7 lines
- LED light Color: Red
- Dimensions 83.5 x 9.8 x 3.5 cm.
- Available in PC software to organize posts via Serial port (can use a USB to RS-232 Converter).
- Can make custom logo or character
- It has an infrared remote control to adjust the display
- It has an internal RTC

Blue Indoor Moving Sign


Moving Sign / LED Display with a width of 95 pixels (7 rows x 95 columns).
specifications:
- Power supply: 5VDC (adapter)
- Number of columns: 95 columns
- Number of lines: 7 lines
- LED light Color: Blue
- Dimensions 83.5 x 9.8 x 3.5 cm.
- Available in PC software to organize posts via Serial port (can use a USB to RS-232 Converter).
- Can make custom logo or character
- It has an infrared remote control to adjust the display
- It has an internal RTC

Pink Indoor Moving Sign


Moving Sign / LED Display with a width of 95 pixels (7 rows x 95 columns).
specifications:
- Power supply: 5VDC (adapter)
- Number of columns: 95 columns
- Number of lines: 7 lines
- LED light Color: Pink
- Dimensions 83.5 x 9.8 x 3.5 cm.
- Available in PC software to organize posts via Serial port (can use a USB to RS-232 Converter).
- Can make custom logo or character
- It has an infrared remote control to adjust the display
- It has an internal RTC

Low cost indoor P4 moving sign


Moving Sign / LED Display with 128 pixels wide (8 rows x 128 columns).

specifications:
- Power supply: 5VDC (adapter)
- Number of columns: column 128
- Number of lines: 8 lines
- LED Light Color: Red
- Dimensions 51.8 x 5.3 x 2.2 cm.
- Available in PC software to set the posts through the USB port.

3 Color dual line indoor LED moving display




Moving sign display module can display three colors on each dot.

Specifications: 
- Color: tricolor (red, amber, green) 
- Number of lines: 16 lines 
- Number of columns: column 160 
- Capable of displaying simple graphics 
- Available in PC program to fill in the characters into the display module 
- Can create their own characters to be displayed to the display module. 
- Dimensions: 125.5 cm x 4cm x 16cm

Miniature Thermocouple Connectors Flat Pin


Omega SMPW thermocouple connectors are mini size flat 2 pin TC connectors designed to connect temperature sensor instrumentation and a temperature controller or process control HMI automation panel. Male 2 pole TC plugs and matched female 2 prong TC jack pairs are stock items. 
Standard size round pin OSTW plugs, jacks and thermocouple TC connectors are also available - see related products below.
Accessories for wire, crimp, cable clamp, grommet and strain relief are in the accessories link. 
SMPW is manufactured as a form fit replacement for the legacy SMP model. 

Features:
• Color-Coded for ANSI or IEC
• Captive Cover Screws
• Write-on Window
• Chisel point connection pins
• Accepts Stranded or Solid Wire up to Size 20 AWG
• Quick Connect Contact Washers Internal Wire Divider
• SMPW Series , Glass filled Nylon construction is rated to 220°C (425°F)
• HMPW Series, Liquid Crystal Polymer (cadmium-free) construction is rated to 260°C (500°F)
• Form Fit Replacement for Legacy SMP Model

LIPO 11.1V1800mAh LB-12


LIPO 11.1V1800mAh LB-12


Description

-     Lithium Polymer rechargeable battery (for DARwIn only).
-     PCM is incorporated to protect the batteryfrom overcharge, discharge, and excessive current.
-     Cannot be used for Bioloids because it the connectorand size differs.
-     Battery cover and extension cable are notincluded.
-     Can be recharged with LBC-10 BatteryCharger.

Components



Component

Quantity

Battery

LIPO 11.1V 1800mAh LB-12

1

* Battery Charger (LBC-10) sold separately

Specifications



Weight

106g

Size

88 x 35 x 26mm

Voltage

11.1V

Current

1800mAh

Discharge rate

5C

Etc.

PCM built-in (overcharge, discharge, excessive current protection)

 Precautions

** Cannot be recharged via DARwIn and needs to be charged using a specific charger (LBC-10). 
-     Do not drop or fold parts of the battery or its parts.
-     Do not fold the end of the sutured portion.
-     Do not apply heat, water or any other liquid on the battery.
-     Do not place in the microwave, washing machine or dryer.
-     Do not use damaged batteries. (inflated,deformed, damaged, etc)
-     Do not short circuit the polarity.
-     Do not take the battery apart.
-     When charging, make sure the battery is connected into the correct polarity.
-     Do not charge when the battery is hot. Please charge after it has cooled off.
-     Battery will not charge when connected to the robot. 

 Storage Precautions
- Detach the battery from the robot or controller when storing away.
- When storing away the battery for a long time, make sure the battery life is around 50%.
- Do not store it in wet or hot places.
** LIPO 11.1V 1800mAh LB-12 has a warranty period of 6 months.

Compatible Products

-  Robot :DARwIn-OP

-  BatteryCharger: LIPO Battery Charger LBC-10

** NOT compatible with the CM-Seriescontrollers.