CRC9 to RP SMA female bulkhead (RG174/26cm Cable)

CRC9 to RP SMA female bulkhead (RG174/26cm Cable) 

Suit for Ericsson / Huawei / Maxon / Netcomm / Novatel Wireless / Option Wireless / Samsung / Sierra Wireless / Sony Ericsson/ZTE/ wireless card

TCM8240 Camera Breakout

TCM8240 Camera Breakout

A simple breakout board for the TCM8240MD 1300x1040 CMOS camera, using a 6MHz oscillator. This breakout is meant as an easier way to use the camera and not a plug and play design.

The project that we used to test the basic functionality uses an LPC2103 and can be found here. Note, there is an included frame grab utility located in the ppm-fd directory that only works in Linux, but if all you want to do is compile the project, Linux is not required.

Note: This board is on a 0.05" grid.

LinkSprite JPEG Color Camera TTL Interface

LinkSprite JPEG Color Camera TTL Interface

The LinkSprite JPEG color camera allows you to capture and output JPEG images through UART, making it easy to integrate into an existing design.

Note: Cameras purchased before November 01, 2010 output RS232 serial data, so you will need a level converter if you plan on connecting it to an Arduino or other microcontroller. See the related items for an appropriate converter. Cameras purchased after this time are use a TTL interface.

Note: These only work reliably with a 5V power supply, even though the manual states they can work at 3.3V. If you want to use it at 3.3v, you will need a lower baud rate. Check the comments for more information.

Features:

• VGA/QVGA/160x120 resolution
• Support capture JPEG from serial port
• Default baud rate of serial port is 38400
• 5V power supply
• Size 32X32mm
• Current consumption: 80-100mA

CMOS Camera Module - 640x480

CMOS Camera Module - 640x480


This is a high-quality color CMOS camera module. Power the CM-26N/P module, hook up any display, monitor, or LCD screen with an RCA input and get vivid color video at 640x480 resolution. Module is easily mountable and has a wide operating voltage (5V to 15V). Comes with high quality optics, all the on board circuitry to output RCA signal, and cable harness.

Features:

• 5V to 15V input
• 50mA (at 12V)
• Switchable NTSC and PAL output using a jumper

Multi Function Point Of Sale Terminal

PS100-N is a newly designed POS terminal with fashionable shell. PS100-N is multi card reading available, such as magnetic strip card, IC card, and mifare card (Contactless Card ).

PS100-N also supports multi kinds of printers, of which customer often requires different from one to another, including dot matrix, thermal, and dot matrix with tooth hole paper (China specific); meanwhile, PS100-N supports multi means of communication, multi functions, and various added value application. 

It widely used in places like department store, mini market, Food Center/Food Court, catering,  canteen, cooking shop etc, which need fast and easy pay access.

Specifications

• CPU: 32 bits ARM-based RISC CPU
• Memory: 2MB FLASH，8MB SDRAM，1MB SRAM
• Display: 128×64 dot matrix LCD display with LED backlight
• Keypad: 11 numeric/ alphabetic denotation keys, 8 functional keys
• Magnetic card reader: 1/2/3 tracks, (compliance with ISO 7811)
• IC card reader: 1 ,(compliance with EMV2000)
• Built in mifare reader, iso14443 compliant
• SAM socket: 3, (compliance with ISO7816)
• Modem: a) Synchro SDLC, with transmitting speed of 1200/2400/ 9600bps, b) Asynchro V.92, with transmitting speed of 33.6Kbps
• ETHERNET/LAN port : TCP/IP Ethernet
• Port Interface: 2 RS232 interfaces, 1 telephone line interface,1 side-placed telephone interface, 1 I2C bus interface,1 Ethernet interface
• Printer: high speed thermal printer, with a speed of 12.5 lines/second,paper width: 58mm, peripheral diameter of the paper roll: 50mm, internal diameter:13mm
• Power supply: a) Input：100～240VAC，50Hz，1.0A， b) Output：8VDC,2A
• Working environment: a) Working temperature: 41F to 104F ,b) Relative humidity: 20%～90%
• Storage environment: a) Storage temperature：-4F～158F, b) Relative humidity: 5%～95%
• Dimension: 260 mm× 142 mm ×95mm
• Weight: 750g

Toshiba TCM8240MD CMOS Camera - 1300x1040

Toshiba TCM8240MD CMOS Camera - 1300x1040

The TCM8240MD is a high quality, very small 1.3 mega-pixel color camera from Toshiba with the standard data+I2C interface.

Features:

* Small size, Dimensions: 6x6x4.5mm
* 2.8V Supply
* Up to 15fps
* 1300x1040 pixel resolution
* Built-in color filter
* 1/3.3 inch optical format
* Auto luminance control (ALC)
* Auto white balance (AWB)

Toshiba TCM8230MD CMOS Camera - 640x480

Toshiba TCM8230MD CMOS Camera - 640x480

The TCM8230MD is a high quality, very small 640x480 CMOS camera from Toshiba with the standard data+I2C interface.

Features:

* Small size
* 2.8V Supply
* 30fps
* 640x480 pixels
* RGB color filter
* 1/6 inch optics included
* YUV or RGB output
* Auto shutter control (AES)
* Auto gain control (AGC)
* Auto white balance (AWB)

Dimensions: 6x6x4.5mm

SHT-10 Humidity and Temperature Sensor

SHT-10 Humidity and Temperature Sensor  (SHT10, SHT11 and SHT15)

 Fully calibrated

 Digital output

 Low power consumption

 Excellent long term stability

 SMD type package – reflow solderable

Product Summary

SHT1x (including SHT10, SHT11 and SHT15) is Each SHT1x is individually calibrated in a precision Sensirion’s family of surface mountable relative humidity humidity chamber. The calibration coefficients are and temperature sensors. The sensors integrate sensor programmed into an OTP memory on the chip. These

elements plus signal processing on a tiny foot print and coefficients are used to internally calibrate the signals provide a fully calibrated digital output. A unique from the sensors. The 2-wire serial interface and internal capacitive sensor element is used for measuring relative voltage regulation allows for easy and fast system humidity while temperature is measured by a band-gap integration. The tiny size and low power consumption

sensor. The applied CMOSens® technology guarantees makes SHT1x the ultimate choice for even the most

excellent reliability and long term stability. Both sensors demanding applications. are seamlessly coupled to a 14bit analog to digital

SHT1x is supplied in a surface-mountable LCC (Leadless converter and a serial interface circuit. This results in Chip Carrier) which is approved for standard reflow superior signal quality, a fast response time and soldering processes. The same sensor is also available insensitivity to external disturbances (EMC).

ARM Development Kit for LPC1114 32 bit ARM Cortex

ARM Development Kit for LPC1114 32 bit ARM Cortex

Specifications:

- 24C256 serial eeprom

- DS1307 serial RTC

- Integrated SDCARD Socket

- Socket USB for connecting to PC

- DB9 female RS232 Port

- 5V dan 3.3V regulator

- Integrated LCD Connector (LCD not include)

- I2C Connector

- SPI Connector

- Microcontroller LPC1114 32 bit ARM Cortex

Kit Contain:

- DST ARM Modul

- Serial Cable

- User Manual

- CD Software

The LPC1114 ARM Low Cost ARM module

The LPC1114 ARM Low Cost Arm module 


Technical Specifications:

 System
o ARM Cortex-M0 processor, running at frequencies up to 50Mhz
o ARM Cortex-M0 built in Nested Vector Interrupt Controller(NVIC)
o Serial Wire Debug
o System tick timer

 Memory
o 32KB on-chip flash programming memory
o 8KB SRAM
o In-System Programming(ISP), In-Application Programming(IAP) via on-chip bootloader

 Digital Peripheral
o 42 General Purpose I/O pin configurable pull-up/pull-down resistors
o GPIO pin can be used as edge and level sensitive interrupt source
o High current output driver (20mA) on one pin
o High current sink driver (20mA) on two I2C bus pin in Fast Mode Plus
o 4 general purpose timer/counter with a total of four capture input and 13 match output
o Programmable watchdog timer

 Analog peripheral
o 10 bit ADC with input multiplexing among 8 pins

 Serial peripheral
o UART with fractional baudrate generation, internal FIFO, rs485 support
o 2 SPI controllers with SSP features and with FIFO and multiprotocol capabilities
o I2C bus interface supporting full I2C bus specification and fast mode plus with a data rate 1Mbit/s with multiple address recognition and monitor mode

 Clock Generation
o 12Mhz internal RC oscillator trimmed to 1% accuracy that can optionally be used as system clock
o Crystal oscillator with freq range 1-25Mhz
o Programmable watch oscillator with a frequency range 7.8 Khz-1.8Mhz
o PLL allow CPU operation up to maximum CPU rate without the need for a high frequencies crystal. May be run from the system oscillator or the internal RC oscillator
o Clock output function with divider that can reflect the system oscillator clock, IRC oscillator, cpu clock and watchdog oscillator.

 Power control
o Integrated PMU (power management unit) to minimize power consumption during sleep, deep sleep, and deep power down mode
o Three reduce power mode: sleep, deep sleep, and deep power down mode
o Processor wake up from deep sleep mode via a dedicated start logic using up to 13 functional pin.
o POR(power on reset)
o Brownout detect with four separate threshold for interrupt and force reset

 Unique serial number for device indentification
 Single 3.3V power supply (1.8-3.6V)

ARM Module Specification
 UART TTL Level
 Onboard Power Regulator: 9-30 Volt DC
 1 bit LED Logic Tester
 Extra VCC 3.3V & GND Connection
 JTAG Header
 42 bit I/O
 40p DIP connection compatible with DST-51, DST-AVR, Trainer Board TRN-02, Delta Robo Kits
 PCB Through hole 2.8 x 6.2 cm