Friday, August 27, 2010

Telebit Low Cost Ultra Portable Netbook PC with Intel N450 processor

Telebit Low Cost Ultra Portable Netbook PC with Intel N450 processor.

Specs:
  • Processor : Intel Atom N450 1.6GHz
  • Motherboard: Intel
  • LCD Display : 10.2" WXGA
  • Built in Webcam: 1.3Mpx
  • Wifi:802.11B/G
  • Built in Memory: 1GB
  • I/O: 3 USB port, VGA port, SD/MMC slot
  • Keyboard & mouse: wide & big keyboard, trackpad mouse
  • Audio port: 1 mic & 1 speaker 
  • Ethernet : 1 LAN port, 2 mini PCI-E inside
  • Available in colors: yellow, red, pink blue white, black

WIZ140SR module

WIZ140SR module

Feature
   - Support 4 RS-232 serial ports
   - Connect with the Serial Device directly
     *Adding network function simply and quickly
     *Providing Firmware customization
   - High system stability and reliablilty by using W5300
   - Easy and powerful configuration tool program
   - Support DHCP and DNS function
   - Support static as well as dynamic IP setting
   - 10/100 Mbps Ethernet interface, Max 115,200bps serial interface
   - RoHS compliant


Specification

Architecture
TCP / IP
W5300
PHY
Embedded in Included in W5300
MCU
ARM based 32bit MCU
Network
Interface
10/100 Base-T Ethernet (Auto detection)
Protocol
TCP, UDP, IP, ARP, ICMP, IGMP, MAC, DHCP, DNS
Serial
Data
Port
Interface
TTL
Signals
TXD, RXD, RTS, CTS, GND
Parameters
Parity : None, Odd, Even
Data bits : 7, 8 bit
Flow control : None, RTS / CTS, XON / XOFF
Speed
Up to 115,200bps
Serial
Debug
Port
Interface
TTL
Signals
TXD, RXD
Parameters
Parity : None
Data bits : 8 bit
Flow control : None
Speed
115,200bps
Software
Remote Download and Configuration
Temperature
0 ~ 70°C (Operating), -40~85°C (Storage)
Humidity
10~80%
Power
DC 3.3V, Under 250mA
Connector type
2.54mm Pitch Pin-header, 14Pin (1x14)
2.54mm Pitch Pin-header, 28Pin (2x14)
Size
48.26mm x 35.56mm x 16.2mm

Wednesday, August 25, 2010

RICi-4E1, RICi-4T1, RICi-8E1, RICi-8T1

RICi-4E1, RICi-4T1, RICi-8E1, RICi-8T1
Fast Ethernet over Multiple E1/T1 Lines Network Termination Units .

RIC-4E1, RIC-4T1, RIC-8E1 and RIC-8T1 are Network Termination Units (NTU) connecting Fast Ethernet LANs over four or eight bonded E1 or T1 circuits. They enable service providers to supply transparent Ethernet services. The devices can also be used for transparent connection of corporate LANs over existing E1 or T1 lines.
 FEATURES :
  • Connect Fast Ethernet LANs over up to four or eight bonded E1 or T1 circuits
  • Bond four or eight E1 or T1 ports utilizing Multi-Link PPP (ML-PPP bridge mode) bridging the bandwidth gap between E1/T1 and E3/T3
  • Up to 50 ms differential delay compensation
  • Four 10/100BaseT ports (Fast Ethernet)
  • Enable transparent forwarding of Ethernet user traffic and provides secure management, via VLAN stacking and striping
  • Transparent MAC forwarding
  • Configurable Maximum Transmit Unit (MTU) for the delay versus throughput control
  • Inband and out-of-band management access via:  ASCII terminal ,Web browser, Telnet ,SNMP, including RADview-Lite
  • Four levels of QoS, based on four VLAN priority queues as per 802.1p or DSCP 
  • Monitoring and diagnostic tools on TDM and Ethernet ports for quick fault isolation
  • Fault propagation of E1 or  T1 error conditions to Ethernet port 
  • Interoperable with RAD’s Egate-100 edge gateway
  • The 802.1p and DSCP priority scheme enables users to define 
  • VLAN tagging, stacking and striping option at ingress and egress enables transporting user traffic transparently, keeping all the user VLAN settings intact. In addition, the management traffic may be tagged with a different VLAN, fully separating user traffic from management data.

Typical applications :
  • Ethernet private Line/LAN services
  • IP DSLAM, cellular IP and  WiMAX base station backhauling
  • Interoffice or enterprise LAN connection

Tuesday, August 24, 2010

Pocket size digital storage oscilloscope , NANO.

DSO mobile is a pocket size digital storage oscilloscope fulfills basic electronic engineering is base on ARM Cortex™-M3 compatible 32 bit platform, equipped with 320*240 color display, SD card capability, USB connection, and chargeable batteries.
Features
  • Super portable and lightweight
  • 2.8” color 320*240 display
  • Micro SD card Waveform Storage
  • Basic 1Msps sample rate with 12bit resolution
  • Various measurement markers
  • Various trigger mode
  • Build-in test signal
  • USB chargeable battery
  • Open source

Specification
  • Display 2.8" Color TFT LCD
  • Display Resolution 320×240
  • Display Color 65K
  • Analog bandwidth 0 - 1MHz
  • Max sample rate 1Msps 12Bits
  • Sample memory depth 4096 Point
  • Horizontal sensitivity 1uS/Div~10S/Div (1-2-5 Step)
  • Horizontal position adjustable with indicator
  • Vertical sensitivity 10mV/Div ~10V/Div (with ×1 probe)
  • 0.5V/Div ~10V/Div (with ×10 probe)
  • Vertical position adjustable with indicator
  • Input impedance > 500KΩ
  • Max input voltage 80Vpp (by ×1 probe)
  • Coupling DC
  • Trig modes Auto, Norma, Single, None and Scan
  • Automatic measurement: frequency, cycle, duty, Vpp,

Functionalities:
  • Vram, Vavg and DC voltage
  • Precise vertical measurement with markers
  • Precise horizontal measurement with markers
  • Rising/falling edge trigger
  • Trig level adjustable with indicator
  • Trig sensitivity adjustable with indicator
  • Hold/run feature
  • Test signal Built-in 10Hz ~1MHz (1-2-5 Step)
  • Waveform storage SD card
  • PC connection via USB as SD card reader
  • Upgrade by bootloader via USB
  • Power supply 3.7V Chargeable Lithium battery / USB
  • Dimension (w/o probe) 105mm X 53mm X 8mm

Monday, August 23, 2010

AT-MC101XL

AT-MC101XL by Allied Telesis
Fast Ethernet 100BASE-TX to 100BASE-FX (ST) Multi-Mode Fibre (2km), Stand-Alone Media Converter

This media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to:
» Extend network distances by adding fiber only where it is needed
» Add new devices without replacing costly cable
» Keep pace with changing technology
» Integrate high-bandwidth devices into the network


Product Information:
* Converts Copper Fast Ethernet to Multimode fiber
* Operates under all traffic loads
* Fan-less design
* Auto MDI/MID-X Copper Port
* MissingLink Support
* Transparent to Jumbo packets and VLAN tagged packets
* Fiber Link Test Function
* Industry standard fiber ST/SC connector
* EnergyStar Power Adapters save customers a minimum of 20%(over previous models) in power consumption



.

Saturday, August 21, 2010

RAD HTU-2 HDSL , LAN to LAN interconnection without router

RAD HTU-2 HDSL , LAN to LAN interconnection without router

Wire-speed LAN-to-LAN connection
In campus and corporate environments, there is often a need to connect LANs that are located in separate buildings within a campus or in various locations across town, at distances that exceed the standard Ethernet limitation. The network is typically spread out over a number of locations at various distances from the main network. Since most campus facilities have copper infrastructures, these wires can be used for cost-effective wire-speed LAN interconnection of campus and corporate networks.

Modems with built-in routers and bridges
To relieve the burden of operation from the IT department, it is crucial for organizations to deploy simple, remotely configurable LAN extension devices. RAD modems that feature ChipBridge™ or ChipRouter®, innovative chips designed and developed by RAD, provide transparent Ethernet connectivity over any type of WAN infrastructure. The LRS-24™ modem shelf supports a wide variety of xDSL and fiber optic modems with different rates and ranges.   Central SNMP management enables remote control of all devices. The modems are plug-and- play, requiring almost no configuration.

Varying ranges and multiple data rates 
In the typical corporate configuration shown below, a municipal government wants all institutions, located at varying distances from City Hall, to share the same network. RAD's HTU-2™ HDSL modem and ASMi-50™ MSDSL modem, with built-in bridges or routers, achieve cost-effective LAN extension over different ranges and data rates up to 2.048 Mbps.
Typical applications:
  • LAN-to-LAN connection
  • High speed data transfer HDSL
  • High speed Internet connection

Typical users:
  • Carriers' outsourcing departments
  • the Corporate with multiple remote sites
  • Military and government networks
Features:
  • Built-in ChipBridge and ChipRouter
  • Different xDSL modems in the same platform
  • Supports long distances
  • Combination of fiber and copper in the same platform
  • Automatic learning and aging of MAC addresses
  • Plug-and-play Ethernet interface
  • HTU-2 in 4 wires,n x 64 kbps up to 2,048 kbps can reach Up to 4.8 km (3 miles) or 9.6 km

Benefits :
  • Cost-effective solution – no need for external routers Wire-speed connections
  • Most cost-effective support of different ranges and rates
  • Increases customer coverage at low cost
  • Significant space savings and lower maintenance expenses
  • One management system for easy end-to-end management
  • Adapts to remote site topology
  • Simple installation and configuration
 HTU-2 trademarks of RAD Data Communications Ltd.© 2009 RAD Data Communications. All rights reserved.

Friday, August 20, 2010

Display panel meters for thermometer

Display panel meters for thermometer
- Power supply: 12VDC
- Measurement range: 32-140 ° F / 00-60 ° C
- Display Resolution: 0.1 ° F
- Accuracy 2 ° C with internal sensor
- Response: 0.5 seconds
- Display: 3.5 digit 7segment (0.56 inch) + unit ° C / F 1-digit
- LED Color: red
- There are a selection of temperature measurement in Celsius or Fahrenheit units
- The LED brightness can automatically adjust the circumstances surrounding

STK600 AVR® Flash MCU Starter Kit.

STK600 AVR® Flash MCU Starter Kit. The STK600 is a complete starter kit and development system for the AVR and AVR®32 flash microcontrollers from ATMEL® Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs.

New firmware releases for STK600 are embedded with the releases of AVR Studio®. The upgrade process will start when you connect to the STK600 board (you will be asked to perform the procedure). If for some reason the automatic upgrade fails, please try the manual upgrade procedure.STK600 AVR® Flash MCU Starter Kit. The STK600 is a complete starter kit and development system for the AVR and AVR®32 flash microcontrollers from ATMEL® Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs.

New firmware releases for STK600 are embedded with the releases of AVR Studio®. The upgrade process will start when you connect to the STK600 board (you will be asked to perform the procedure). If for some reason the automatic upgrade fails, please try the manual upgrade procedure.

STK600EVB/Starter kit contains:, 1 main board STK600 (I/O, ISP, UART),  USB & power supply, cables,  microcontroller ATmega2560
  
sold separately:
STK600-uC3A0x-TQFP144 and (for) microcontroller AT32UC3A0512

STK600-TQFP100 set, STK600-RC100M-11, STK600-RC100X-13, STK600-RC100M-18, STK600-RCuC3A100-28, STK600-RCUC3C1-38. microcontroller ATmega1280

Asuro programmable mini mobile robot

ASURO is a mobile mini-robot, completely programmable in C and especially developed for education  at the German Aerospace Centre DLR, department for Robotics and Mechatronics.  Assembly is easy for experienced electronic technicians and feasible for a novice. Except for the printed circuit boards  (PCB) only standard parts for assembly will be used. 

For programming we use freeware only. Therefore ASURO is exceptionally suitable as an introduction  into processor-controlled hobby electronics, for projects in schools and universities, for studies and  adult education centres. Special tools, which are freeware for private users, have been used for all  electronic development phases and software design, proving how robots can be designed without  using expensive tools or machines. 

ASURO is equipped with a RISC-processor and two independently controlled motors, an optical line- tracer, six collision-detector switches, two odometer-sensors, three optical displays and an infrared- communication set for programming and remote control by a PC .
We must inform all users, ASURO is no toy and is not to be handed out to children under the age of  three years, as they may swallow the dozens of small components.  Please provide some batteries and start the assembly!

And yes: ASURO is another way of saying: “Another Small and Unique Robot from Oberpfaffenhofen!”
© DLR & AREXX  Oberpfaffenhoven

24x16 Green Dot Matrix Display Board

24x16 Green Dot Matrix  Display Board   (available in limit stocks)
Information Display Board-based dot matrixSpecifications:- Power Supply: 5VDC- The number of dot: 24x16- Display area: 4 inch x 2.5 inch- LED Color: Green- Interface: SPI- Base: HT1632 LED Display controller- Support 16-level PWM to regulate the LED brightness- Cascade: 4 board- Display settings are controlled microcontroller- Include: cable connecting to the microcontroller- Dimensions: 96.52 x 99.06 mm