Wednesday, December 23, 2009

The Digital Trainer type DT-01


The Simple and complete digital trainer with bread board , cignal tester and component that consist of simple digital circuits, flip-flop, monostable multivibrator, counters, encoders, decoders, multiplexers, demultiplexers, sequencers, resistor, LED, and seven segment LED display, memory devices, etc.







Specifications:
  • input power 8VDC 1,5Amp
  • pulse switch : two bounce-free push button
  • Eight DIP switch for logic level
  • DC output power 5VDC 750mAmp
  • solderless breadboard with 1580 interconnecting point
  • clip terminal available for logic probe
  • BNC jack
  • Eight LED display buffered logic level
  • Banana Jack
  • Fine clock adjustable with two clock selection, Low or Hi

Tuesday, December 22, 2009

wiz6000 server , serial to wireless and LAN to wireless

External server , wiz6000 server , serial to wireless and LAN to wireless

Features:
  • easy to implement 'serial to wireless' or ethernet to wireless'
  • support 802.11 b/g
  • support AP/station/Gateway mode
  • 54Mbps data rate and max 20Mbps Effectife data transmission
  • Full-Featured network protocol stack
  • Built-in webserver for configuration standard via web browser
  • CE, FCC and KCC Certificated

wiz1000, external device server , serial to ethernet

wiz1000, external device server , serial to ethernet and vice versa.

features:


  • easy to connect with serial device
  • adding network function is simply and quickly
  • providing firmware customization
  • system stability and reliability by using the w5100
  • support PPPOE connection
  • support serial configuraion with simple and easy command
  • support password to ensure security
  • configuration tool program
  • telnet comport option (RFC2217) compliant
  • 10/100 Base-T ethernet interface
  • up to 230Kbps serial interface
  • ROHS Compliant
  • CE, FCC and KCC certified

WIZ-200web - module

The WIZ-200web - module.

Features:
  • embedded web server module having ATmega128 and W5300
  • operate as http server
  • support 10/100 ethernet
  • ROHS compliant
  • Provide configuration tool program for easy configuration and control ( EVB )
  • Guarantee system stability and reliability using w5300, the hardwired tcp/ip chip

Monday, December 14, 2009

FARGO Persona C30e Single-Side Color Dye sublimation/thermal resin printer

The Persona C30e is all about simple, reliable and affordable ID card printing. It's designed for everyone who wants to make great-looking plastic ID cards - even technology cards - on a budget. For hundreds of applications including company and school IDs, access cards, membership and customer loyalty cards, the Persona C30e delivers durable plastic ID cards with printing that's more colorful than ever.

The Persona C30e includes a feature that puts it ahead of every other card printer in its class: versatility. The same C30e that prints and encodes your employee photo ID access cards in full color can also print contract worker IDs in black and white, rewritable visitor badges and thin, flexible loyalty cards for mailing to frequent customers. Or use economical half-panel ribbons to personalize pre-printed cards with a photo and bar code. It's easy to configure the Persona C30e to meet your specific card printing and encoding needs

Wednesday, December 09, 2009

W3150A vs. W3150A+

WIZnet Chip (Fully Hardwired TCP/IP stack)

Performance Benefits Line-Speed Data transmission by hardwired logic
Implementation Benefits Easy control way like memory
Cost Benefits
No OS required
Application Benefits - As an Internet Controller : Easy embedded to controllers or data collectors with low-end MCUs
-As an Internet Accelerator : Reducing Jitter with fixed processing time by hardware. Enhancing video and voice quality.
Feature
- Support Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IGMP, IPv4, ARP, PPPoE, Ethernet
- Support ADSL connection (with support PPPoE Protocol with PAP/CHAP Authentication mode)
- Supports 4 independent sockets simultaneously
- Not support IP Fragmentation
- Standard MII Interface for Ethernet-PHY chip
- Supports 10BaseT/100BaseTX
- Supports full-duplex mode
- Internal 16Kbytes Memory for Tx/Rx Buffers
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- Small 64 Pin LQFP Package
- Lead-Free Package

Block Diagram
Difference between W3150A and W3150A+

W3150A+ W3150A
Three MCU interface
(Direct, Indirect and SPI)
Only two interface possible
(Direct & Indirect)
Pin no.33 used for SPI enable Pin no.33 used for PCLOCK
Interrupt Register clear by writing on particular bit Interrupt Register clear by
reading the register
Add "Send_OK" interrupt is added
when send operation is complete
No interrrupt when send operation is complete
No delayed ACK mode supported in TCP Not possible
UDP zero checksum is removed in TX UDP zero checksum is there in
TX and RX both



Tuesday, December 08, 2009

EVB-B1 EVB for W3150A, with AVR


EVB-B1 is special purpose Evaluation Board for W3150A, with AVR.

Feature

- Data Transfer up to 6Mbps with Atmega 128(8MHz)
- Internet Application Protocols : ANSI C Source Codes such as TCP, UDP, DHCP
- By using external 96pin connectors, AVR's all pins can be used coping with developer's needs
- Available of testing SPI Interface
- Provides various application source codes : Loopback, Webserver, Ping
- Supports ISP & JTAG Interface

Development Environment

- Compiler : All source codes are developed by GCC Compiler
- Firmware programmingg : ISP cable

Specification

Category
Specification
Base Board
UART
RS232 serial port
Display
Text LCD(Gray 16 X 2)
PM-PIC24 MCU Atmega128
-128K Bytes Flash
- 4K Bytes EEPROM
CLOCK 8MHz Crystal
External Memory SRAM (32K Bytes)
NM7010B+
TCP/IP
W3150A+
PHY
IP101A-LF (Ethernet PHY)
Mag Jack
RDA-125BAG1A

Monday, November 30, 2009

G-Mouse, GPS receiver for notebook/PC

G-Mouse, GPS receiver for notebook/PC, with features:
  • SiRF Star III high performance GPS Chipset
  • Highly sensitive (Tracking sensitivity -159dBm)
  • Extremely fast TTFF (Time To First Fix) at low signal level
  • Support NMEA 0183 data protocol
  • Built-in supercap to reserve system data for rapid satelite acquisition
  • Built-in patch antenna
  • Super cohesive magnetic for mounting on the car
  • waterproof and non-slip on the bottom
  • LED indicator for GPS fix or not fix
  • USB interface (BU-353 type)
  • Built-in software interfacing to PC/Notebook

Wednesday, November 25, 2009

2.4Ghz 18dB Panel Antenna

2.4Ghz 18dB Panel Antenna with mounting. good quality, light weight, usually used for internet connection

Tuesday, November 24, 2009

Solar Cell

Solar cells are often electrically connected and encapsulated as a module. Photovoltaic modules often have a sheet of glass on the front (sun up) side, allowing light to pass while protecting the semiconductor wafers from the elements (rain, hail, etc.). Solar cells are also usually connected in series in modules, creating an additive voltage. Connecting cells in parallel will yield a higher current. Modules are then interconnected, in series or parallel, or both, to create an array with the desired peak DC voltage and current.

Solar cells can also be applied to other electronics devices to make it self-power sustainable in the sun. There are solar cell phone chargers, solar bike light and solar camping lanterns that people can adopt for daily use.

To make practical use of the solar-generated energy, the electricity is most often fed into the electricity grid using inverters (grid-connected photovoltaic systems); in stand-alone systems, batteries are used to store the energy that is not needed immediately.

Available power : 10 watt, 15 watt, 20 watt, 50 watt and 80 watt