Tenergy TB-6B 50W Balancing Charger

Tenergy TB-6B 50W Balancing Charger: NiMH/NiCD/Li-PO/Li-Fe/SLA

Features:

• Designed to balance charge NiMH/NiCd/Li-Ion/Li-Po/LiFe/SLA battery packs.
• Able to balance charge a 15S cell NiMH/NiCd pack or a 6S cell Li-Ion/Li-Po/LiFe pack with a maximum current of 5A.
• Able to store up to 10 different battery charging programs.
• LCD display charging indicator.
• Includes HiTech, JST, Tamiya, Mini Tamiya, Deans, bare leads, and EC3 charging connectors.
• Designed to balance charge NiMH/NiCd/Li-Ion/Li-Po/LiFe/SLA battery packs.
• Able to balance charge a 15S cell NiMH/NiCd pack or a 6S cell Li-Ion/Li-Po/LiFe pack with a maximum current of 5A.
• Able to store up to 10 different battery charging programs.
• LCD display charging indicator.
• Includes HiTech, JST, Tamiya, Mini Tamiya, Deans, bare leads, and EC3 charging connectors.

Cautions:

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.
• NOTE: Please do NOT charge 2 NIMH packs in serial or parallel
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
• Put the batteries in fire-proof container in charging
• Never leave batteries unattended when charging
• Do not put batteries on wood surface or carpet when charging
• We are not responsible for any damage caused by misuse or mishandling of  Li-Ion batteries in charging
• We are not responsible for damage caused by other Li-ion batteries not supplied from us
• Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product is any changes are made to the charged accessories or connectors.

Tamiya 70198 Wall-Hugging Mouse

Robot "Mouse" wall detection from Tamiya. The robot is designed to move away if it hit the wall. Some features of this model are:
- a new chassis design with white
- Does not require nuts for installation
- A set of stickers
- Requires AA batteries in order to move. (Batteries not included).

specifications:
- Length: 140mm
- Chassis: ABS Resin
- Body: ABS resin, translucent red
- Motor: 2 DC motors
- Power Supply: AA batteries
- Run Time: 6 hours (estimated using Alkaline batteries)

Off-Road Tires - 1 pair

Tamiya off-road wheels are suitable for robotics applications

Specification:
- 50mm wheel diameter
- Width 30mm
- Shaft 3x 100mm
- Tires made of semi-pneumatic bending rubber
- No need for bolts for installation
- Compatible with Tamiya 3-Speed Crank-Axle Gearbox, 4-Speed Crank-Axle Gearbox, Twin-Motor Gearbox.

datasheet https: // goo • gl / KBY2yk

Truck Tire Set - (2pairs)

This set of four truck tires with wheels works well in Tamiya Construction and Robotics projects. The hex shaft inserts directly into the wheel with no tools. This tire set installs directly onto many of Tamiya's gearbox shafts

2-Channel Remote Control Rhinoceros Beetle by Tamiya

2-Channel Remote Control Rhinoceros Beetle by Tamiya

This item is an assembly kit of a space exploration vehicle or other non-fictional mechanism. Here's a neat beetle robot kit for the whole family to enjoy! The rhinoceros beetle robot can be controlled via a 2-channel remote control box that will be connected through cables to the robot's dual motors upon completion. The gearboxes are installed separately for moving the left and right side of the center legs, where the movements are transmitted to the front and rear legs via crank and linkage rods. The pre-assembled gearboxes can be attached to the Type 130 motors, which come pre-wired to the remote control circuit board. The robot can be easily assembled by simply snapping and screwing parts together. A Philips screwdriver is thoughtfully included! Two AA batteries is required (not included) for the remote control. Do not use Ni-MH batteries. Three types of horns are included for building a hercules beetle, Japanese beetle, or caucasus beetle.

Mechanical Beetle

Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Tamiya Mechanical Beetle to walk forwards or backwards at one of two selectable speeds. A linkage rod connected to the beetle’s front right leg swings its horn left and right as the beetle walks. When it bumps into an obstacle, the beetle automatically turns to avoid it and continues walking. Because of this behavior, the beetle can provide amusement by simply running around in a small, enclosed space. The body is made from a transparent green ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action.

Basic specifications

• Total length: 195 mm
• Total weight: 110 g (without batteries)
• Body material: ABS resin
• 2 possible different speeds.
• Gearbox, motor, and control switch are included.
• Requires one AA (a.k.a. R6 or UM3) battery (not included).
• Continuous running time with Alkaline battery: 3hrs. at low speed / 2hrs. at high speed

Note: This is a kit. Assembly requires using a screwdriver and snapping parts together. No soldering is required. Run on flat, smooth surfaces; avoid running over slopes, on bumpy roads, or on thick carpet.

2-Channel Remote Control Stag Beetle by Tamiya

This item is an assembly kit of a space exploration vehicle or other non-fictional mechanism. 17.3cm long when completed. 

digiware

Here's a neat beetle robot kit for the whole family to enjoy! The stag beetle robot can be controlled via a 2-channel remote control box that will be connected through cables to the robot's dual motors upon completion. The gearboxes are installed separately for moving the left and right side of the center legs, where the movements are transmitted to the front and rear legs via crank and linkage rods. The pre-assembled gearboxes can be attached to the Type 130 motors, which come pre-wired to the remote control circuit board. The robot can be easily assembled by simply snapping and screwing parts together. A Philips screwdriver is thoughtfully included! Two AA batteries is required (not included) for the remote control. Do not use Ni-MH batteries

Mecanum Rover 2.0 Robot (Basic Kit) - Arduino Compatible

Mecanum Rover 2.0 Robot (Basic Kit) - Arduino Compatible  is a versatile mobile robot based on the popular Arduino Uno microcontroller. The Rover uses two Tamiya twin motor gearboxes, each with their own pair of encoders, as well as a dual motor controller shield** to control the four Mecanum wheels independently. The DFRobotShop Rover PCB incorporates a standard Arduino Uno (surface mount ATMega328), L293B motor driver (connected to pins 5 to 8), voltage regulator and prototyping area and also doubles as part of the mechanical structural of the robot. The onboard voltage regulator allows the entire board to be powered using as little as 3.7V to ~9V*. 

Features:
Programmable Mecanum driven robot kit
• Complete Arduino board built-in (ATMega328p)
• Two dual H-bridges for independent control of four motors
• Onboard voltage regulator (only one battery needed) 
• Compatible with a variety of shields 
• Soldering is required

** The Mecanum Rover 2.0 Robot (Basic Kit) - Arduino Compatible  PCB incorporates a dual motor controller, and the shield adds a dual controller which uses different pins, allowing you to control four DC motors independently. 

2-Channel Remote Control Boxing Fighter Battle Set by Tamiya

The Boxing Fighter now comes as a set of 2. The boxing fighter features a twin motor gear box enabling this little boxer to punch while moving backwards, forwards or turning to the left or right. The Boxing Fighter is also equipped with a judging plate that will allow you to decide who the winner of the fight is. The plate will lower each time you hit your opponent's mouth. When your opponent's plate is completely lowered, you win the fight. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down by fitting one or two stays to the bottom rear of the fighter. Assembly is very simple with use of screws and snap-lock parts. Packaging specially designed to be used as a ring, with a boxing ring printed on the inside.

Basic Specifications (for one Boxing Fighter)

Total length: 141mm (arm extended), 87mm (arm retracted)  Total width: 92mm  Total height: 144mm  Total weight: 160g (w/ out remote control)  Body material: ABS resin  Gearbox, motor, remote-control also included.  A screwdriver for assembly is provided.  Requires two R6/AA/UM3 batteries (sold separately) for each Boxing Fighter.

How to play

Hitting your opponent in the mouth will make the judging plate lower. When your opponent's plate is completely lowered, you win the fight.

Track and Wheel Set

Allowing for a large degree of adjustability and creativity in design, the Track and Wheel Set offers three different lengths of tracks to choose from. Sprocket wheels, idler wheels, and road wheels have all been included. Use with a variety of Tamiya Construction and Robotics products.

Tracks:

• (2) 30-link
• (4) 10-link
• (4) 8-link

Mechanical Turtle - Four Leg Crawling Type

Tamiya presents the 4-leg crawling-type Mechanical Turtle as its next Robocraft Series item. Motor rotating power is transferred to the legs via crank plates to make the Turtle crawl. Each pair of legs (front and rear) are molded as one piece and front leg plate is attached with a ball joint that serves as a fulcrum to realistically imitate turtle crawling. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the turtle a funky look. Reverse switch is also transparent, giving you a peek at the turtle's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

All you need included

Body, legs, motor, gearbox, switch and screws are included in the kit. Assembly is very simple with use of screws and snap-lock parts. Cable ends are rubber capped with cut areas pre-marked for easy wiring.

Turtle crawling movement strikingly rendered

The secret of movement resides in the front leg plate. This plate is attached with a ball joint that serves as a fulcrum to transform crank plate forward/backward movement to make the turtle crawl.

Clear type switch

Clear switch with green transparent parts add a cool, futuristic look. Thanks to this switch, the turtle can crawl forward and backward.

Crawling the Turtle

Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on long-haired carpet.

Mechanical Kangaroo - Two Leg Jumping Type

Mechanical Kangaroo - Two Leg Jumping Type

Tamiya presents the robot replica of the beloved kangaroo from Australia. This amazing kangaroo-robot jumps by moving its rear legs simultaneously to go forward. When walking slowly, it also uses its front legs (just like they do down under) and when running quickly, it uses its tail for balance. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the kangaroo a funky look. Reverse switch is also transparent, giving you a peek at the kangaroo's internal mechanisms.

All you need included

Assembly is very simple with use of screws and snap-lock parts. Cable ends are rubber capped with cut areas pre-marked for easy wiring.

When using high-speed gearbox, the kangaroo walks standing on its tail and rear legs.

A gearbox transforms the motor movement to make the kangaroo's rear legs move. You can choose between two different gears for gearbox assembly. When using the low speed gearbox, rods are attached to the lower holes of front legs and kangaroo walks standing on its tail.

Low-speed gearbox makes the kangaroo walk using its front and rear legs

When using the low speed gearbox, rods are attached to the upper holes of front legs. Changing rod position using different holes in the crank plate gives you 4 different speed possibilities within slow speed mode. When walking slowly, it impressively imitates a real kangaroo's movement.

Altering tail position makes kangaroo change direction

Changing the position of the tail allows the kangaroo to keep balance during high-speed running and enables it to change direction. Putting the tail straight will make the kangaroo go straight but setting it to the right/left will make the kangaroo turn to the right/left.

Playing with the Kangaroo

Avoid running over slopes, bumpy roads or longhaired carpet. Run on flat, smooth surfaces. Watching its humorous movement will provide you with loads of fun.

Narrow Tire Set 58mm

Accessory gearbox production motorcycle wheels for Tamiya suitable for robotics applications.

Specification:

- Plastic wheels with rubber tires

- Diameter: 58mm

- Width: 16mm

- Hubs: 2 round shafts and 2 hex shafts

Wall Hugging Mouse

This fun little robot is powered by AA batteries (sold separately) and it features a sensor which allows it to detect the position of a nearby wall and move along it in a zig-zag pattern. It can be enjoyed as it is and budding engineers may even use its components in combination with other Tamiya Educational Construction products to create their own original robots.

Mechanical Rabbit - Hopping Type

Introducing the 8th wonder of the Tamiya Robocraft series! Get ready, because here comes a super fun to assemble, super fast, super colorful Mechanical Rabbit. Motor rotating power is transferred to the legs via crank plates to make the rabbit hop. The long ears and the rounded face, which have been specially molded, employ semi-transparent parts, giving the rabbit a funky look. Assembly is very simple with use of screws and snap-lock parts.

See-through transparent switch and gearbox

A see-through switch with pink transparent parts adds a cool, futuristic look. Moreover, this feature also allows you to see internal mechanisms.

Battery moved forward for effective movement.

The Mechanical Rabbit is powered by only one R03/AAA/UM4 battery (sold separately) to keep this agile bunny light weight. Motor and battery case have been shifted to the front of the body to allow for smooth, unhindered rear leg movement.

Different movement for front and rear legs to make the rabbit hop.

Motor rotating power is transferred to the legs via crank plates to make the rabbit hop. Rear legs kick the robot forward in a hopping motion similar to that of a...cute little bunny rabbit. As more of the weight is born by the front legs, rollers are attached to the feet to eliminate this extra load.

Running the Rabbit

The mechanical rabbit comes with guides to be attached to both sides of the rabbit so it can be used on Mini 4WD circuits. You can race your friends.

Caution: Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on thick carpet.

Sliding Mouse - Vibrating Action

The tamiya Sliding Mouse: Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

• Easy assembly using snap-on parts and screws.
• Direction can be easily altered by changing the direction of the rods.
• Speed can be adjusted by changing the angle of the rods.
• Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles.
• Eyes act as rollers also helping model to smoothly work around obstacles.
• Games and races can be easily made by building an obstacle course using cardboard etc.
• Best performance on smooth flat surfaces.

Specs

• Length = about 97mm 
• Height = about 70mm 
• Body Material = ABS resin 
• Motor = Type 130
• Requires AAA batteries (sold separately)
• running time: about 2 hours

Mechanical Racehorse - Galloping Type

The latest and fastest release in the Tamiya Robocraft Series, this galloping racehorse with jockey is loads of fun to build, loads of fun to play with, and educational too! Employing left and right legs moving at the same time, the legs and wheel base have been designed for stability and faster running. Overall this galloping racehorse can run 1.3 times faster than the mechanical rabbit.

Low speed, high speed

Power from the rotating motor is transferred to the legs via link rods to make the horse gallop. Two link rod holes on the back legs allow you to choose between two running styles.

Easy assembly

Assembly is very simple with use of screws and snap-lock parts. Cable ends are rubber capped with cut areas pre-marked for easy wiring.

3 types of stickers

The mechanical horse is comprised of mainly transparent orange plastic allowing internal mechanics to be easily seen. Kit includes 3 types of stickers for representation of horse's mask and number, and jockey's clothes to make each model easily distinguishable while racing with friends.

How to play

Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on thick carpet.

6.0V 3700mAh Sub-C NiMh Battery Pack

6.0V 3700mAh Sub-C NiMh Battery Pack

specifications:

• Voltage: 6VDC.
• Flow: 3700mAh.
• Number of cell: 5.
• Min Discharge Voltage: 4.5V
• Dimensions: 115 x 47 x 24 mm.
• Equipped with tamiya connector
• Suitable for Hexapod Robot Kit MSR-H01

Mechanical Pig - Shaking Head Type

Introducing the latest addition to the popular Tamiya Robocraft Series, the Mechanical Pig with shaking head action. Pig's body and head parts have been molded with pink semi-transparent plastic, giving the pig a futuristic look. Assembly is very simple with use of screws and snap-lock parts. 

Walking the Pig

Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on thick carpet.

Planetary Gearbox

Planetary gear box motor production Tamiya

Specification:
- Has a 4: 1, 5: 1, 16: 1, 20: 1, 25: 1, 80: 1, 100: 1, and 400: 1 gear ratio.
- Using Mabuchi RC-260 motor with 3-5V power supply

datasheet http: // zipansion • com / 18dXv