Showing posts sorted by relevance for query arduino uno. Sort by date Show all posts
Showing posts sorted by relevance for query arduino uno. Sort by date Show all posts

Friday, April 29, 2011

Arduino Uno

Arduino Uno
The Arduino Uno is a microcontroller board based on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.

"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.

Summary
  • Microcontroller ATmega328
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328)
  • EEPROM 1 KB (ATmega328)
  • Clock Speed 16 MHz
Arduino Uno Board front and back
Power

The Arduino Uno can be powered via the USB connection or with an external power supply. The power source is selected automatically.

External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

The power pins are as follows:

VIN. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.

5V. The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.

3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 50 mA.

GND. Ground pins.

Memory

The ATmega328 has 32 KB (with 0.5 KB used for the bootloader). It also has 2 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).

Input and Output

Each of the 14 digital pins on the Uno can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:

Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the ATmega8U2 USB-to-TTL Serial chip.

External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.

PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.

SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI library.

LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.

The Uno has 6 analog inputs, labeled A0 through A5, each of which provide 10 bits of resolution (i.e. 1024 different values). By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and the analogReference() function. Additionally, some pins have specialized functionality:
e on the computer. The '8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer (but not for serial communication on pins 0 and 1).

A SoftwareSerial library allows for serial communication on any of the Uno's digital pins.

The ATmega328 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the I2C bus; see the documentation for details. For SPI communication, use the SPI library.

Programming

The Arduino Uno can be programmed with the Arduino software (download). Select "Arduino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.

The ATmega328 on the Arduino Uno comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).

You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see these instructions for details.

The ATmega8U2 firmware source code is available . The ATmega8U2 is loaded with a DFU bootloader, which can be activated by connecting the solder jumper on the back of the board (near the map of Italy) and then resetting the 8U2. You can then use Atmel's FLIP software (Windows) or the DFU programmer (Mac OS X and Linux) to load a new firmware. Or you can use the ISP header with an external programmer (overwriting the DFU bootloader). See this user-contributed tutorial for more information.

Automatic (Software) Reset

Rather than requiring a physical press of the reset button before an upload, the Arduino Uno is designed in a way that allows it to be reset by software running on a connected computer. One of the hardware flow control lines (DTR) of the ATmega8U2 is connected to the reset line of the ATmega328 via a 100 nanofarad capacitor. When this line is asserted (taken low), the reset line drops long enough to reset the chip. The Arduino software uses this capability to allow you to upload code by simply pressing the upload button in the Arduino environment. This means that the bootloader can have a shorter timeout, as the lowering of DTR can be well-coordinated with the start of the upload.

This setup has other implications. When the Uno is connected to either a computer running Mac OS X or Linux, it resets each time a connection is made to it from software (via USB). For the following half-second or so, the bootloader is running on the Uno. While it is programmed to ignore malformed data (i.e. anything besides an upload of new code), it will intercept the first few bytes of data sent to the board after a connection is opened. If a sketch running on the board receives one-time configuration or other data when it first starts, make sure that the software with which it communicates waits a second after opening the connection and before sending this data.

The Uno contains a trace that can be cut to disable the auto-reset. The pads on either side of the trace can be soldered together to re-enable it. It's labeled "RESET-EN". You may also be able to disable the auto-reset by connecting a 110 ohm resistor from 5V to the reset line; see this forum thread for details.

USB Overcurrent Protection

The Arduino Uno has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Physical Characteristics

The maximum length and width of the Uno PCB are 2.7 and 2.1 inches respectively, with the USB connector and power jack extending beyond the former dimension. Four screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
 The Newer version of UNO click here.  More about Arduino & Shields click here.
Arduino Uno Schematic Reference

Wednesday, July 25, 2012

Arduino Uno - R3 origin Italy

The new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.  Online Order

The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Note: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!   Onlline Order

Features:
  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

Wednesday, October 01, 2014

Bluno - BLE with Arduino Uno

Bluno integrates a TI CC2540 BT 4.0 chip with the Arduino UNO development board. It allows wireless programming via BLE, supports Bluetooth HID, AT command to config BLE and you can upgrade BLE firmware easily. Bluno is also compatible with all Arduino Uno pins which means any project made with Uno can directly go wireless! 

Specs:
  • On-board BLE chip: TI CC2540
  • Wireless Programming via BLE
  • Support Bluetooth HID
  • Support AT command to config the BLE
  • Transparent communication through Serial
  • Upgrade BLE firmware easily
  • DC Supply: USB Powered or External 7V~12V DC
  • Microcontroller: Atmega328
  • Bootloader: Arduino Uno ( disconnect any BLE device before uploading a new sketch )
  • Compatible with the Arduino Uno pin mapping
  • Size: 60mm * 53mm
  • Weight: 30g

Sunday, May 24, 2015

NUC131 NuEdu UNO

EVB NuEdu UNO is compatible with the Arduino IDE and add-on shield NuMicro MCU uses 32-bit ARM Cortex M0 as the microcontroller core. Users can use the Arduino IDE to develop applications and utilizing open source code samples from Arduino.
NuEdu-UNO-EVB NUC131 is specific to NuMicro Series NUC131 where users can develop and verify the application program with ease. NuEdu-UNO-NUC131 includes two parts, namely NuEdu-UNO NUC131 (evaluation board) and Nu-Link-Me (Debug Adapter). By using NuEdu-UNO-NUC131, users do not need additional ICE or debug tool.
NuEdu-UNO-NUC131 pin design is compatible with the Arduino UNO pin design.
IDE support:
1. Arduino IDE
2. Keil IDE
3. IAR IDE
4. Coocox IDE

Features:
1. Microcontroller Nuvoton with LQFP64 package.
2. NUC131 characteristics:
- Up to 24 channels of PWM outputs.
- Up to 6 UART.
3. On-board Nu-Link debugger / programmer with SWD connector.
4. The status LEDs (power, user, Tx, Rx and ICE).
5. Reset Button.

Wednesday, September 30, 2015

Intel Edison 2 and Arduino Breakout Kit

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Powered by the Intel® Atom™ SoC dual-core CPU and including an integrated WiFi, Bluetooth LE, and a 70-pin connector to attach a veritable slew of shield-like “Blocks” which can be stacked on top of each other. It’s no wonder how this little guy is lowering the barrier of entry on the world of electronics!
The Intel® Edison packs a robust set of features into its small size, delivering great performance, durability, and a broad spectrum of I/O and software support. Those versatile features help meet the needs of a makers, inventors, and beginners. This is a module with a high speed processor and WiFi and Bluetooth Radios on board. It’s low power and small footprint make it ideal for projects that need a lot of processing power, but don’t have the ability to be near a larger power source or have a large footprint.
This kit also includes a Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1) are all in the same locations as on the Arduino Uno R3 (Arduino 1.0 pinout). Additionally, the Intel® Edison Arduino Breakout includes a micro SD card connector, a micro USB device port connected to UART2, and a combination micro USB device connector and dedicated standard size USB 2.0 host Type-A connector (selectable via a mechanical microswitch). Though this kit won’t turn your Edison into an Arduino itself, you will, however, gain access to to the Arduino’s shield library and resources!

Includes:
  • Intel® Edison (EDI1.SPON.AL.S)
  • Arduino Breakout Board

Features:
Edison
  • Intel® Atom™ system-on-a-chip (SoC) based on leading-edge 22 nm Silvermont microarchitecture including a dual-core CPU and single core microcontroller (MCU)
  • Integrated Wi-Fi, Bluetooth LE, memory, and storage
  • Support for more than 30 industry-standard I/O interfaces via a 70-pin connector
  • Support for Yocto Linux, Arduino, Python, Node.js, and Wolfram
  • Open source community software tools enabling ease of adoption and inspiring third-party app developers to build apps for consumers.
  • EDI1.SPON.AL.S (System-On-Modules - SOM Edison Module IoT Internal Antenna)

Arduino Breakout
  • Compatible with Arduino Uno (except only 4 PWM instead of 6 PWM).
  • 20 digital input/output pins including 4 pins as PWM outputs
  • 6 analog inputs
  • 1 UART (RX/TX)
  • 1 I2C
  • 1 ICSP 6-pin header (SPI)
  • Micro USB device connector OR (via mechanical switch) dedicated standard size USB host Type-A connector
  • Micro USB device (connected to UART)
  • SD Card connector
  • DC power jack (7V – 15V DC input @ 500mA)

Thursday, April 09, 2015

Intel® Edison and Arduino Breakout Kit

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Powered by the Intel® Atom™ SoC dual-core CPU and including an integrated WiFi, Bluetooth LE, and a 70-pin connector to attach a veritable slew of shield-like “Blocks” which can be stacked on top of each other. It’s no wonder how this little guy is lowering the barrier of entry on the world of electronics!

The Intel® Edison packs a robust set of features into its small size, delivering great performance, durability, and a broad spectrum of I/O and software support. Those versatile features help meet the needs of a makers, inventors, and beginners. This is a module with a high speed processor and WiFi and Bluetooth Radios on board. It’s low power and small footprint make it ideal for projects that need a lot of processing power, but don’t have the ability to be near a larger power source or have a large footprint.

This kit also includes a Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1) are all in the same locations as on the Arduino Uno R3 (Arduino 1.0 pinout). Additionally, the Intel® Edison Arduino Breakout includes a micro SD card connector, a micro USB device port connected to UART2, and a combination micro USB device connector and dedicated standard size USB 2.0 host Type-A connector (selectable via a mechanical microswitch). Though this kit won’t turn your Edison into an Arduino itself, you will, however, gain access to to the Arduino’s shield library and resources!

Includes:

Features:
Edison
  • Intel® Atom™ system-on-a-chip (SoC) based on leading-edge 22 nm Silvermont microarchitecture including a dual-core CPU and single core microcontroller (MCU)
  • Integrated Wi-Fi, Bluetooth LE, memory, and storage
  • Support for more than 30 industry-standard I/O interfaces via a 70-pin connector
  • Support for Yocto Linux, Arduino, Python, Node.js, and Wolfram
  • Open source community software tools enabling ease of adoption and inspiring third-party app developers to build apps for consumers.
  • EDI1.SPON.AL.S (System-On-Modules - SOM Edison Module IoT Internal Antenna)
Arduino Breakout
  • Compatible with Arduino Uno (except only 4 PWM instead of 6 PWM).
  • 20 digital input/output pins including 4 pins as PWM outputs
  • 6 analog inputs
  • 1 UART (RX/TX)
  • 1 I2C
  • 1 ICSP 6-pin header (SPI)
  • Micro USB device connector OR (via mechanical switch) dedicated standard size USB host Type-A connector
  • Micro USB device (connected to UART)
  • SD Card connector
  • DC power jack (7V – 15V DC input @ 500mA)

Thursday, October 01, 2015

Arduino Basic Kit

This kit includes all the components you need to build simple projects and learn how to turn an idea into reality using Arduino. Arduino Basic Kit has been developed in collaboration with Autodesk. When you purchase the kit you will receive online access to 15 step-by-step tutorials to make simple projects using components that let you control the physical world through diff erent kinds of sensors and actuators.

Once you have mastered this knowledge, you will have a pale tte of code and circuits to create something beautiful and useful. So build, hack and share!

Projects you can make:

  • 01 GET TO KNOW YOUR TOOLS an introduction to the basics
  • 02 SPACESHIP INTERFACE design the control panel for your starship
  • 03 LOVE-O-METER measure how hot-blooded you are
  • 04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
  • 05 MOOD CUE clue people in to how you're doing
  • 06 LIGHT THEREMIN create a musical instrument you play by waving your hands
  • 07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
  • 08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
  • 09 MOTORIZED PINWHEEL a colored wheel that will make your head spin
  • 10 ZOETROPE create a mechanical animation you can play forward or reverse
  • 11 CRYSTAL BALL a mystical tour to answer all your tough questions
  • 12 KNOCK LOCK tap out the secret code to open the door
  • 13 TOUCHY-FEEL LAMP a lamp that responds to your touch
  • 14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
  • 15 HACKING BUTTONS create a master control for all your devices!

Getting Started
When you purchase an Arduino Basic Kit you will receive an email with all the infos you need to access the tutorials online on Autodesk Project Ignite. You will be able to get started with Arduino, learn the basics of coding and electronics, jump right into the step-by-step tutorials and make the 15 simple projects. You can find the Arduino code for all these projects within the Arduino IDE, click on File / Examples / 10.StarterKit.

Arduino Basic Kit includes more than 150 components and an Arduino UNO.

Arduino Basic Kit includes:
1 Arduino UNO, 1 USB cable, 1 Breadboard 400 points, 70 Solid core jumper wires, 1 Easy-to-assemble wooden base, 1 9v battery snap, 1 Stranded jumper wires (black), 1 Stranded jumper wires (red), 6 Photoresistor [VT90N2 LDR], 3 Potentiometer 10kilohm, 10 Pushbuttons, 1 Temperature sensor [TMP36], 1 Tilt sensor, 1 alphanumeric LCD (16x2 characters), 1 LED (bright white), 1 LED (RGB), 8 LEDs (red), 8 LEDs (green), 8 LEDs (yellow), 3 LEDs (blue), 1 Small DC motor 6/9V, 1 Small servo motor, 1 Piezo capsule [PKM17EPP-4001-B0], 1 H-bridge motor driver [L293D], 1 Optocouplers [4N35], 2 Mosfet transistors [IRF520], 5 Capacitors 100uF, 5 Diodes [1N4007], 3 Transparent gels (red, green, blue), 1 Male pins strip (40x1), 20 Resistors 220 ohm, 5 Resistors 560 ohm, 5 Resistors 1 kilohm, 5 Resistors 4.7 kilohm, 20 Resistors 10 kilohm, 5 Resistors 1 megohm, 5 Resistors 10 megohm

Tuesday, January 26, 2016

XNUCLEO-F030R8 Package A

This development kit includes :

XNUCLEO-F030R8 (STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F030R8)
IO Expansion Shield (Provides interfaces for connecting XBee, WiFi-LPT100, and sensors)
Sensors Pack (Gas, Color, Flame, Hall, IR, UV, Laser, Sound, Temperature and Humidity, Tilt, Liquid level, etc.)

XNUCLEO-F030R8 Features

  • Compatible with NUCLEO-F030R8, onboard Cortex-M0 microcontroller STM32F030R8T6
  • Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
  • ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
  • Supports mbed, build prototype quickly by mbed SDK and online tools
  • Comprehensive free software HAL library including a variety of software examples
  • Comes with a separated ST-LINK/V2 module




CompareXNUCLEONUCLEORemarks
Arduino compatibilityUNO, LeonardoUNOXNUCLEO can be configured by jumper to compatible with UNO (default) or Leonardo
Arduino ICSP interfaceYesNoneICSP is required by certain kinds of shields
USB connectivityYesNoneThe USB connector of NUCLEO is for debugging ONLY, not available for USB connection
USB connectorMicro USBMini USBMicro USB is the advanced USB standard
Morpho headers markMostNoneNow you can check the PCB mark instead of datasheet
Common interfaces are connected viaJumpers0Ω resistorsJumpers are much easier to use, need no soldering
UART debuggingAvailable while in-circuit debuggingNot available while in-circuit debuggingThe NUCLEO integrated ST-LINK/V2 functional chip can be simulated as serial port, however, it's not available while in-circuit debugging, whereas XNUCLEO features a stand-alone USB TO UART chip.
8MHz crystalYesNoneTimer is more accurate when using external 8MHz crystal
32.768KHz crystalYesNoneRequired for RTC
USB fuseYes (500mA)NoneThe computer USB interface might be harmed without fuse
LEDs41The more LEDs, the easier to monitor program running status
UART indicatorYesNoneData communication is visible now
DC inputYesNoneA convenience
Button positionClose to PCB edgeClose to Arduino connectorThe button won't be untouchable when connecting with an Arduino shield if it were close to the PCB edge
ST-LINKSeparatedIntegratedST-LINK can be used anywhere else
Comes with USB cableYesNone


  1. STM32F030R8T6
    • Core : ARM® 32-bit Cortex™-M0
    • Operating frequency : 48MHz
    • Operating voltage : 2.4V-3.6V
    • Package : LQFP64
    • Memories : 64kB Flash, 8kB SRAM
    • Interfaces : 2 x SPI, 2 x USART, 2 x I2C
    • AD/DA : 1 x AD (12 bit)
  2. SPX3819M5 : 3.3V voltage regulator
  3. AMS1117-5.0 : 5.0V voltage regulator
  4. CP2102 : USB to UART convertor
  5. Arduino connector : for connecting Arduino shields
  6. ICSP interface : Arduino ICSP
  7. USB TO UART : for debugging
  8. SWD interface : for programming and debugging
  9. ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
  10. 6-12V DC input
  11. User button
  12. Reset button
  13. Power indicator
  14. User LED
  15. Serial port Rx/Tx indicator
  16. 500mA fast self-recovery fuse
  17. 8MHz crystal
  18. 32.768KHz crystal
  19. ADC/I2C selection jumper
    • short A and B : Arduino A4, A5 is used as I2C
    • short B and C : Arduino A4, A5 is used as ADC
  20. UART selection jumper
  21. MCU current test jumper : for low power tests
  22. Power selection jumper
    • short 5V and U5V : powered from USB connection
    • short 5V and E5V : powered from external power supply
  23. User button jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
  24. User LED jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires

Sunday, January 31, 2016

XNUCLEO-F302R8 Package A

This development kit includes :


  • XNUCLEO-F302R8 (STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F302R8)
  • IO Expansion Shield (Provides interfaces for connecting XBee, WiFi-LPT100, and sensors)
  • Sensors Pack (Gas, Color, Flame, Hall, IR, UV, Laser, Sound, Temperature and Humidity, Tilt, Liquid level, etc.)


XNUCLEO-F302R8 Features

  • Compatible with NUCLEO-F302R8, onboard Cortex-M4 microcontroller STM32F302R8T6
  • Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
  • ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
  • Supports mbed, build prototype quickly by mbed SDK and online tools
  • Comprehensive free software HAL library including a variety of software examples
  • Comes with a separated ST-LINK/V2 module


CompareXNUCLEONUCLEORemarks
Arduino compatibilityUNO, LeonardoUNOXNUCLEO can be configured by jumper to compatible with UNO (default) or Leonardo
Arduino ICSP interfaceYesNoneICSP is required by certain kinds of shields
USB connectivityYesNoneThe USB connector of NUCLEO is for debugging ONLY, not available for USB connection
USB connectorMicro USBMini USBMicro USB is the advanced USB standard
Morpho headers markMostNoneNow you can check the PCB mark instead of datasheet
Common interfaces are connected viaJumpers0Ω resistorsJumpers are much easier to use, need no soldering
UART debuggingAvailable while in-circuit debuggingNot available while in-circuit debuggingThe NUCLEO integrated ST-LINK/V2 functional chip can be simulated as serial port, however, it's not available while in-circuit debugging, whereas XNUCLEO features a stand-alone USB TO UART chip.
8MHz crystalYesNoneTimer is more accurate when using external 8MHz crystal
32.768KHz crystalYesNoneRequired for RTC
USB fuseYes (500mA)NoneThe computer USB interface might be harmed without fuse
LEDs41The more LEDs, the easier to monitor program running status
UART indicatorYesNoneData communication is visible now
DC inputYesNoneA convenience
Button positionClose to PCB edgeClose to Arduino connectorThe button won't be untouchable when connecting with an Arduino shield if it were close to the PCB edge
ST-LINKSeparatedIntegratedST-LINK can be used anywhere else
Comes with USB cableYesNone



  1. STM32F302R8T6
    • Core : ARM® 32-bit Cortex™-M4
    • Operating frequency : 72MHz
    • Operating voltage : 2.0V-3.6V
    • Package : LQFP64
    • Memories : 64kB Flash, 16kB SRAM
    • Interfaces : 2 x SPI, 3 x USART, 3 x I2C, 1 x CAN, 1 x USB
    • AD/DA : 1 x AD (12 bit), 1 x DAC (12 bit)
  2. SPX3819M5 : 3.3V voltage regulator
  3. AMS1117-5.0 : 5.0V voltage regulator
  4. CP2102 : USB to UART convertor
  5. Arduino connector : for connecting Arduino shields
  6. ICSP interface : Arduino ICSP
  7. USB TO UART : for debugging
  8. USB connector : USB communication interface
  9. SWD interface : for programming and debugging
  10. ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
  11. 6-12V DC input
  12. User button
  13. Reset button
  14. Power indicator
  15. User LED
  16. 500mA fast self-recovery fuse
  17. Serial port Rx/Tx indicator
  18. 8MHz crystal
  19. 32.768KHz crystal
  20. ADC/I2C selection jumper
    • short A and B : Arduino A4, A5 is used as I2C
    • short B and C : Arduino A4, A5 is used as ADC
  21. UART selection jumper
  22. MCU current test jumper : for low power tests
  23. Power selection jumper
    • short 5V and U5V : powered from USB connection
    • short 5V and E5V : powered from external power supply
  24. USB enable jumper
    • short the jumper to enable
    • open the jumper to disable
  25. User button jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
  26. User LED jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires

Saturday, March 05, 2016

Genuino UNO Rev 3



The Genuino UNO R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable (not included) or power it with a AC-to-DC adapter or battery to get started. The UNO differs from all preceding boards because it does not use the FTDI USB-to-serial driver chip.

Genuino Uno and Arduino Uno share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Uno or a Genuino Uno. 

Technical specifications

MicrocontrollerATmega328
Operating Voltage5V
Input Voltage (recommended)7-12V
Input Voltage (limit)6-20V
Digital I/O Pins14
PWM Digital I/O Pins6
Analog Input Pins6
DC Current per I/O Pin40 mA
DC Current for 3.3V Pin50 mA
Flash Memory32 KB
Flash Memory for Bootloader0.5 KB
SRAM2 KB
EEPROM1 KB
Clock Speed16 MHz

Friday, July 19, 2013

PINGUINO-MX220

PINGUINO-MX220 ULTRA LOW COST 32 BIT PINGUINO MAPLE ARDUINO LIKE DEVELOPMENT BOARD

ARDUINO-UNO like board with PIC32MX220F032D.
Generally this board outperform ARDUINO-UNO as hardware capabilities as you can see from the table below:
PIC32-PINGUINO-MX220ARDUINO-UNO
CPU32 bit8 bit
CLOCK40 MHz20 MHz
FLASH32 KB32 KB
RAM8 KB1 KB
USBYESNO*
LOW PWRYES**NO
GPIO MAX40 MHz5 MHz
ADC1.1 MSPS15 KSPS
DMAYES 4 CHNO
UEXTYESNO
* require additional chip FT232 or ATMega with USB
** hardware allow power down to 10 uA operation for handheld battery apps

The only Pinguino shortcoming compared with Arduino is the smaller community and the less projects available ready to use.


FEATURES

  • PIC32MX220F032D 32 bit, 40 Mhz microcontroller 32KB Flash 8KB RAM
  • Ultra Low Power design
  • Li-Po battery connector for handheld applications
  • UEXT connector which allow many existing modules like RF, ZIGBEE, GSM, GPS to be connected
  • two LEDs
  • one USER BUTTON
  • RESET button
  • mini USB connector is used which is common and used in most cell phones, so you do not have to buy other cables
  • all PIC ports available on 0.1" connectors matching ARDUINO platform and second row with correct 0.1"step
  • ICSP signals provided on 0.1" step connector if you do not want to use Pinguino IDE and want to program this board with PIC-KIT3.