Thursday, November 16, 2017

LTC6800HMS8 opamp chip

LTC6800HMS8 is a IC operational amplifier (Op Amp) that works on a voltage of 2.7 ~ 5.5 VDC with a gain bandwidth of 200 KHz.


  • Power supply 2.7 ~ 5.5 VDC
  • 8-TSSOP Packaging
  • Input offset voltage 100 uV
  • Input bias current 4 nA
  • Gain bandwidth is 200 KHz

AD7825BNZ ADC chip

AD7825BNZ is a 24 pin ADC IC with quad-channel input, single 8 bit ADC resolution, and 2 smps sampling rate.


  • Power supply 2.7 - 5.5 VDC
  • DIP-24 Packaging
  • Parallel interface
  • 8-bit resolution
  • Number of channels 4
  • The data conversion time is 420 ns
  • Accuracy 0.75 LSB

Wednesday, November 15, 2017

FR05-S1-N-0-102 2.4 GHz Small SMD Chip Antenna 1dBi

Mini antenna 2.4 GHz with unity gain bandwidth of 1 dBi. Suitable to be applied to bluetooth dongles, wifi dongles, Zigbee, RF modules, smartphones, and other devices with small PCB sizes.

  • Dimensions of 7.0 mm x 3.0 mm x 2.0 mm
  • 2.4 GHz working frequency
  • The input impedance is 50 Ohm
  • Gain 1 dBi (typ), 1.7 dBi (max)

Tuesday, November 14, 2017

Optocoupler chip 4N26

Optocoupler with Phototransistor Output
Specification:
- Emitter power: 1.25V DC (Typ)
- Emitter current: 50mA
- Vce: 30V DC (Min)
- Vec: 7V DC (Min)
- Vcb: 70 V DC (Min)
- Ic: 50mA (Absolute Max)
- Isolation Voltage: 1500V
- 6-pin DIP packaging

ISO EM U8-P1-O8-T isolated converter 0-200mV to 0-200mV 24VDC

isolated DC-DC converter using magneto-electric method in the process of isolating the voltage. This device works to convert input voltage 0 - 200 mV into output voltage 0 - 200 mV on 24 DC power supply. This device also has a pin that serves as zero regulator, gain, and full-scale calibration in the converter.

More detailed technical information can be seen in the datasheet below.

Datasheet

Tuesday, November 07, 2017

Small dpdt Switch

Small DPDT switch 6 pin


  • Number of pins 6
  • DPDT Configuration
  • Slide type switch
  • Logic ON / OFF

SS14 Schottky Diode 40V 1Amp SMA

Schottky Diode 1A 40V with packing SMA / DO-214AC.


  • Flow 1 A
  • Package DO-214AC
  • Back voltage 40 V

SS24 Schottky Diode 2A 40V SMB

Schottky Diode 2A 40 V with SMB / DO-214AA packaging.



  • Current 2A
  • Packaging DO-214AA
  • Back voltage 40 V

MS5540-CM Pressure Sensor

MS5540-CM is a SMD-hybrid pressure sensor which is a combination of piezoresistive pressure sensor and an ADC IC. The MS5540-CM provides a built-in 16-bit ADC resolution that will give you great precision over any pressure changes received by the sensor. For communication with microcontroller, MS5540-CM provides 3-wire interface. One interesting thing is that this sensor has been protected by a unique gel layer that is claimed to provide waterproof capability to a depth of 100 meters without the need for additional protection.

Specification:
- Power Supply: 3.3 V
- Pressure Measurement: 10 - 1100 mbar
- Over-pressure: 10 bar
- Resolution: 0.1 mbar
- Output: Digital
- ADC: 16-bit
- Interface: 3-wire

Touch Pads 16-input

touchpad module (touch switch) capacitive chip-based touch sensor TTP229. This module supports up to 16 touch input channels, each of which has a high sensitivity to the human touch.
The output of this module is a TTL signal, so you can easily connect this module to the microcontroller (Arduino, MCS-51, AVR, ARM, and so on).


Specification:
- Working Voltage: 2.4 - 5.5 V
- Sensor chip: TTP229
- Number of Channels: 16 Channels
- Interface: TTL
- Sensing Type: Capacitive