Thursday, April 13, 2017

SMD 2K OHM Resistor 0805 5% (10 pcs per pack)

SMD Resistors (0805) with a 2 kilo ohm resistance value and tolerance of 5%.

Note: In the sales package consisting of 10 pcs resistor.


  • Packaging SMD 0805
  • Tolerance 5%
  • Barriers 2 Kohm

BLE Shield v2.1 Bluetooth 4.0 Low Energy

modules / shield Bluetooth Low Energy (BLE) BLE nRF8001-based chip that is designed for board-board Arduino, such as the Arduino Uno, Arduino Mega, Arduino Due, and Arduino Leonardo. This module allows the Arduino to communicate with devices - devices such as PCs, smartphones, and tablets via Bluetooth Low Energy communication protocol, so with this shield then you can develop a project based wireless arduino BLE, such as:
- Control pin I / O via the mobile application.
- Sending of sensor data from the Arduino to your PC or smartphone.
- Make PC / smartphone as an Internet gateway for Arduino.
- And many more.


  • The power supply 3.3 or 5 V
  • Working frequency of 2.4 GHz
  • interface ACI
  • Class Bluetooth 4.0 Low Energy

Bargraph 8 LED Bi Color (Red & Green) w/o Com Polarity

LED bargraph which contains 8 LEDs Bi-Color. This bargraph has two colors (red and green), depending on polarity.


  • Number of rows 8 rows
  • The light color Red / Green (depending on polarity)
  • LED power supply per line + / 1.5 VDC


Wednesday, April 12, 2017

MB7950 Mounting Hardware Kit

The equipment for ultrasonic sensor module MaxSonar WR series
specifications:
- nut and rubber ring for the completeness of the ultrasonic sensor module MaxSonar WR series
- Include: Neoprene O-ring, Buna-N O-ring and 3/4 "Lock Nut

Saturday, April 08, 2017

ESP-07S ESP8266 Serial to Wifi Module

ESP-07s is compatible ESP8266 wifi module which is an improvement from the predecessor version of the ESP-07. This module works at a frequency of 2.4 GHz ISM band using network protocols 802.11b / g / n. In this module has also been equipped with a channel ADC 10-bits that can be used to convert the voltage analog to digital in the voltage range between 0-1 V, 9 pieces GPIO pins to control the input component output, and an antenna connector IPX that serves to put an antenna externally.
ESP-07s is very suitable when used for applications Internet of Things (IOT).

Specification:
- Frequency: 2.4 GHz
- Working Voltage: 3.3 V
- Interface: SPI
- Packaging: SOP-208 miles
- GPIO: 9 GPIO
- ADC: 10-bit
- Antenna Connector Type: IPX
- Dimensions: 16mm * 17mm * 3mm

DS3231 RTC Breakout Board R2

Breakout Board DS3231 RTC module R2 is a Real Time Clock (RTC) with I²C interface in which has been integrated with an internal crystal oscillator (TXCO). odule has been equipped with back-up battery (CR2032) that will keep the conditions of the time to keep pace even though the main power supply has been turned off.
Internal crystal (TXCO) on the module can improve the accuracy of timing, so that the information regarding the second, minute, hour, day, month and year can be displayed very accurately.

Specification:
- Dimensions:: 38 x 22 x 14 mm
- Working Voltage: 3.3 ?? 5.5 V
- Chip RTC: DS3231
- Memory Chip: AT24C32
- Memory capacity: 32 Kb
- Interface: I²C
- Data Rate: 400 KHz
- Battery: CR2032 @ 3 V
- Features: Supports programming square wave output, equipped with an internal temperature sensor

12nF MKT

MKT capacitor 12 nF capacitance value.

Arduino Tian

The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 533MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian has also a build in 4GB eMMC memory that will can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.
NB: In some countries, it is prohibited to sell WiFi enabled devices without government approval. While waiting for proper certification, some local distributors are disabling WiFi functionality. Check with your dealer before purchasing a Tian if you believe you may live in such a country.
NB.Before to start to run Arduino Tian must install CP201x driver on the computer. 

Technical specs

  • Arduino Microprocessor
  • Processor Atheros AR9342
  • Architecture MIPS
  • Operating Voltage 3.3V
  • Flash Memory 16MB + 4GB eMMC
  • Ram 64MB DDR2
  • Clock Speed 560 MHz
  • WiFi 802.11 b/g/n 2.4 GHz dual-band
  • Ethernet 802.3 10/100/1000 Mbit/s
  • USB 2.0 HostArduino Microcontroller
  • Microcontroller SAMD21G18
  • Architecture ARM Cortex-M0+
  • Operating Voltage 3.3V
  • Flash Memory 256 KB
  • SRAM 32 KB
  • Clock Speed 48 MHz
  • Analog I/O Pins 6
  • DC Current per I/O Pins 7mA (I/O Pins)General
  • Input Voltage 5 V
  • DAC
  • PWM Output 12
  • Power Consumption 470 mA
  • PCB Size 53 x 68.5 mm
  • Bluetooth CSR8510, Bluetooth with EDR / BLE 4.0
  • Weight 36g


Friday, April 07, 2017

Relay SPDT 12VDC 7A

7A 12VDC SPDT Relay
5 pin SPDT relay with coil voltage 12 VDC and contact 7A.


  • Pin number 5
  • configuration SPDT
  • 12 VDC coil voltage
  • Contact Flow 7A

BUK854-800A transistor

BUK854-800A an IGBT bipolar transistor with the collector-emitter voltage of 800 V and 12 A. BUK854-800A collector current is often used in motor drivers, converters, DC / DC and AC / DC, as well as other high frequency switching applications.

Specification
- Collector-emitter voltage: 800 V
- Flow Collector: 12 A
- Power Dissipation: 85 W
- Collector-emitter Voltage On-State: 3.5 V
- Leakage energy: 0.5 mJ
- Input capacitance: 400-750 pF
- Packaging; TO-220-AB