MPLAB Starter Kit for PIC24F

The PIC24F Starter Kit contains everything needed to begin exploring the high performance and versatility of the PIC24F microcontroller family. This inexpensive kit includes an integrated in-circuit debugger and programmer, USB device and host connectors, tri color LED, capacitive touch pad and an OLED display. Menu driven demonstration software supports data logging, thumb drive, and graphics applications to test the PIC24F MCU. 

PLEASE NOTE: Some customers have experienced issues upon installing the starter kit from the CD. The project build process will fail due to the lack of a license key. If you experience this, the workaround is to download and install the free edition of the MPLAB C Compiler for PIC24F MCUs, and then install the starter kit from the CD. 

The PIC24F Starter Kit includes integrated hardware debug and programmer circuitry to develop, program and test applications on the board’s PIC24F MCU device --all from the MPLAB graphical development environment. A USB connection to a host computer supplies communications and power to the board --no additional external power supply is needed.

Demos included:

• Interactive, menu driven display using Parallel Master Port (PMP)
• Capacitive touch sensing with the Charge Time Measurement Unit (CTMU)
• Time and data display using the Real Time Clock and Calendar (RTCC)
• RGB LED Control with three PWMs and Peripheral Pin Select (PPS)
• USB Flash drive interface with USB embedded host peripheral
• Real-time data graphing using the ADC and display multi-tasking
• Real-time data capture using multi-tasking with USB embedded host

MPLAB Start Kit for the PIC24F demo support is now distributed as part of the Microchip Application Libraries, www.microchip.com/MLA.

Once downloaded and installed, demos for this start kit include ‘PIC24F Starter Kit 1’ and nearly all USB related demo projects, please see the USB library release note for details.

Features:

• Easy and inexpensive way to learn the PIC24F 16-bit MCU family
• Starter kit features the PIC24FJ256GB106 MCU with 256KB Flash
• Peripherals including CTMU for capacitive touch and USB OTG
• Integrated debugger
• Free MPLAB C Compiler
• PIC24F board with integrated debugger
• MPLAB Starter Kit CD containing MPLAB IDE, MPLAB C Compiler for PIC24 MCUs, application notes, and sample programs
• USB cable

ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS.

STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Key Features

• 5 V power supplied by a USB connector
• USB 2.0 full speed compatible interface
• USB standard A to mini B cable
• SWIM specific features
• 1.65 V to 5.5 V application voltage supported on SWIM interface
• SWIM low-speed and high-speed modes supported
• SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
• SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
• SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
• JTAG/serial wire debugging (SWD) specific features
• 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
• JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
• JTAG supported
• SWD and serial wire viewer (SWV) communication supported
• Direct firmware update feature supported (DFU)
• Status LED which blinks during communication with the PC
• Operating temperature 0 to 50 °C
• 2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)

Device summary
Part number Order Code Description

• ST-LINK/V2 In-circuit debugger/programmer
• ST-LINK/V2-ISOL In-circuit debugger/programmer with digital isolation

The Odroid-C1

INTRODUCING THE ODROID-C1

A POWERFUL RASPBERRY PI REPLACEMENT 

The ODROID-C1 has many advantages over the Raspberry Pi. The processor is an S805 1.5GHz Quad-core from Amlogic with 1GByte DDR3 RAM, Gigabit Ethernet and IR-receiver. The size of this computer is still only 85 x 56 mm with a weight of 40g, and offers silent operation, 2~3W average power usage, and instant portability, since it fits in a shirt pocket.

One powerful feature of the ODROID-C1 is the row of GPIO (general purpose input/output) pins along the edge of the device. These pins are a physical interface between the board and the outside world. The 40pin interface header includes SPI, I2C, UART, ADC and GPIO function.

The ODROID-C1 is suitable for anyone from professional software engineers building Kinect-drive robotics projects to kids learning to program with the Scratch language. Run the latest Ubuntu 14.04 or Android KitKat operating systems for programming, learning, gaming, media center, web server, office/college work, hardware IO platform and many other applications. The powerful 1.5Ghz quad-core processor, low cost, energy efficient features and massive software library make the ODROID-C1 the perfect modern computer for work or play.

APM 2.5 board (Ardupilot)

The APM 2.5 board, which was released in July 2012, is operationally identical to the APM 2.0 board, and runs the same code without modification. It does, however, include a number of improvements designed to increase its reliability and eliminate common sources of user error:

It includes reverse polarity and other power and signal protection on all main I/O pins, for enhanced robustness and reliability.

The telemetry port has been changed to a 5-pin connector that cannot be plugged in backwards, eliminating a common source of user error in APM 2.0. (An adapter cable to the standard 3DR and Xbee radios is included.)

An external magnetometer may now be used, if desired, to keep the sensor away from sources of magnetic interference. To use that, cut the trace between the micro-jumpers marked above and attach the external magnetometer to the I2C port.

Additional LEDs have been added for future use It only supports an external GPS module (the 3DR uBlox 6 is recommended). This is to ensure that the user can place the GPS in the most optimal position, with a clear view of the sky and far from sources of electromagnetic interference such as ESCs and other radios.

The dataflash chip is now built-in, rather than on a custom SD card. This is to avoid problems some users were having with APM 2.0 card insertion and contacts. There is a new connector for future expansion (to be announced later).

Aside from these changes, the boards operate the same. Please see the APM 2.0 instructions for pin definitions and other information about the APM 2.x generation boards.

Note: Because the APM 2.5 board does not have a daughterboard covering the barometric pressure sensor (the small silver rectangular sensor in the image above), it's important that the board be mounted in an enclosure to protect the sensor from airflow, which can badly throw off the altitude readings. If you choose to mount the board out in the open, make sure to cover the sensor with some cotton padding or some tissue

WF57ETIBCDC TFT Color LCD 5.7" 320 x 240px

Color TFT LCD Module, has a size of 5.7 "that is capable of displaying images with a resolution of 320 x 240 pixels RGB. This LCD has a transmissive TFT type with white LED backlight, brightness of 250 cd / m2.

specifications:

- Power supply: 3.3 VDC

- Interface: 8-bit Parallel Interface

- Number of dots: -

- LCD Type: TFT

- Backlight: LED White

- Controller: Microcontroller

- View area: 126.0 x 89.1 mm

- Dimensions: 141.12 x 101.55 x 5.8 mm

WF35CTIBCD0 TFT Color LCD 3.5" 320 x 240px

Color TFT LCD Module, has a size of 3.5 "that is capable of displaying images with a resolution of 320 x 240 pixels RGB. This LCD has a transmissive TFT type with white LED backlight, brightness of 250 cd / m2 and 10ms response.

specifications:

- Power supply: 3.3 VDC

- Interface: 16-bit Parallel Interface

- Number of dots: -

- LCD Type: TFT

- Backlight: LED White

- Controller: Microcontroller

- View area: 73.1 x 55.6 mm

- Dimensions: 93.5 x 66.44 x 7.96 mm

Join to BBM Channel : C00442378

Join to BBM Channel : C00442378
Chat with rosesana.com , get more advantages to the hardware discount and promotions.

uLCD-43PT-AR, Arduino Display Module Pack

4.3 inch Arduino Display module pack including uLCD 43PT Display - adapter shiled and cable.

The uLCD-43PT-AR is an Arduino Display Module Pack, which includes a uLCD-43PT 4.3" LCD Display with Resistive Touch, a 4D Arduino Adaptor Shield and 5 way interface cable.

The uLCD-43PT-AR customises the uLCD-43PT Display specifically for interfacing with the Arduino, to provide a quick and easy interface without any wiring hassles.

The Arduino Display Module Pack enables an Arduino user to quickly connect the 4D Arduino Adaptor Shield to their Arduino, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

The uLCD-43PT-AR has a comprehensive range of serial commands ready to be received from the Arduino, to draw primitives such as lines, rectangles, circles and text, displaying images, playing sound and logging data to uSD card.

Utilises the Arduino's UART Serial Port and a single Digital pin.

Graphic LCD 240x64 STN, Yellow Green Background

Graphic LCD 240x64 STN, Yellow Green Background, Yellow-Green Backlight, 180.0x62.0x14.5 mm

Graphic LCD 240 x 64 pixel size positive transflective yellow green LED backlight.

specifications:

- Power supply: 5.0 VDC Typ.

- Interface: Parallel 8-bit data bus

- Number of dots: 240 x 64

- LCD Type: Graphic

- Backlight: Yellow Green

- Controller: T6963C or Equivalent

- View area: 132.6 x 39.0 mm

- Dimensions: 180.0 x 62.0 x 14.5 mm

LCD12864 Shield for Arduino

LCD12864 Shield for Arduino

This framed LCD12864 Shield with LED backlight is compatible with most of Arduino controllers and supports English/Chinese/Picture display. With 5 analog extension pins and 8 digital pins, the LCD12864 Shield also integrates a 5-key joystick for controlling additional functions, making it an ideal module for prototyping and interactive projects. 

SPECIFICATION

• Power supply: 3.3V
• Pin used: D7, D8, D9, D10, D11, D13, A0
• Reset button 
• 5 degree joystick (using Arduino Analog Pin 0)
• Backlit control (using Arduino Digital Pin 7)
• Extra 5 Analog pins & 8 Digital pins 
• Size:60x55x20mm