Friday, July 18, 2014

NXP LPC-P1343

NXP LPC-P1343
DEVELOPMENT PROTOTYPE BOARD FOR LPC1343 CORTEX M3 ARM MICROCONTROLLER


FEATURES
  • Microcontroller
  • LPC1343 Cortex-M3, up to 72 Mhz
  • 32 kB Flash, 8kB SRAM,
  • UART RS-485, two SSP, I2C/Fast+
  • USB
  • 42 GPIO pins,
  • 4 TIMERS/COUNETRS, CAPTURE,
  • WDT
  • Serial Wire Debug.
  • High-current output driver (20 mA) on one pin.
  • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
  • Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
  • Single 3.3 V power supply (2.0 V to 3.6 V).
  • 10-bit ADC with input multiplexing among 8 pins.
  • GPIO pins can be used as edge and level sensitive interrupt sources.
Board
  • MCU: LPC1343 Cortex-M3, up to 72 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
  • Power supply circuit
  • Power-on led
  • USB connector
  • Debug interface – SWD (Serial Wire Debug)
  • UEXT connector
  • Eight user leds
  • Two user buttons
  • Reset button
  • Prototype area
  • FR-4, 1.5 mm, soldermask, component print
  • Dimensions:80x50mm (3.15 x 1.97")

NXP LPC-P1227.



NXP LPC-P1227
DEVELOPMENT PROTOTYPE BOARD FOR LPC1227 CORTEX M0 ARM MICROCONTROLLER

FEATURES
  • MCU: LPC1227 Cortex-M0, up to 45Mhz, 128 kB Flash, 8kB SRAM, 2 UARTs , SPI, I2C, 10 bit ADC
  • RS232
  • Buzzer
  • NOKIA 3310 LCD
  • 12 MHz crystal resonator
  • Power supply circuit
  • Power-on led
  • Debug interface – SWD (Serial Wire Debug)
  • UEXT connector
  • Two user leds
  • Three user buttons
  • Reset button
  • Prototype area
  • FR-4, 1.5 mm, soldermask, component print
  • Dimensions:80x50mm (3.15 x 1.97")

Thursday, July 17, 2014

NXP LPC-P11C24

NXP LPC-P11C24
DEVELOPMENT PROTOTYPE BOARD FOR LPC11C24 CORTEX M0 ARM MICROCONTROLLER



FEATURES
Microcontroller
  • LPC11C24 Cortex-M0, up to 50 Mhz
  • 32 kB Flash, 8kB SRAM,
  • CAN
  • UART RS-485, two SSP, I2C/Fast+
  • 32 GPIO pins,
  • 4 TIMERS/COUNETRS, CAPTURE,
  • WDT
  • Serial Wire Debug.
  • High-current output driver (20 mA) on one pin.
  • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
  • Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
  • Single 3.3 V power supply (2.0 V to 3.6 V).
  • 10-bit ADC with input multiplexing among 8 pins.
  • GPIO pins can be used as edge and level sensitive interrupt sources.
Board
  • MCU: LPC11C24 Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, CAN,UART RS-485, two SSP, I2C/Fast+, ADC
  • Power supply circuit with power jack
  • Power-on led
  • CAN interface
  • RS232 interface
  • Debug interface – SWD (Serial Wire Debug)
  • UEXT connector
  • Two user leds
  • Two user buttons
  • Reset button
  • Prototype area
  • Variable input voltage
  • FR-4, 1.5 mm, soldermask, component print
  • Dimensions: 92x72mm (3.6 x 2.8")

NXP LPC-P1114

NXP LPC-P1114
DEVELOPMENT PROTOTYPE BOARD FOR LPC1114 CORTEX M0 ARM MICROCONTROLLER


FEATURES
Microcontroller
  • LPC1114 Cortex-M0, up to 50 Mhz
  • 32 kB Flash, 8kB SRAM,
  • UART RS-485, two SSP, I2C/Fast+
  • 42 GPIO pins,
  • 4 TIMERS/COUNETRS, CAPTURE,
  • WDT
  • Serial Wire Debug.
  • High-current output driver (20 mA) on one pin.
  • High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
  • Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
  • Single 3.3 V power supply (2.0 V to 3.6 V).
  • 10-bit ADC with input multiplexing among 8 pins.
  • GPIO pins can be used as edge and level sensitive interrupt sources.
Board
  • MCU: LPC1114 Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
  • Power supply circuit
  • Power-on led
  • USB connector only for power supply, not USB functionality
  • Debug interface – SWD (Serial Wire Debug)
  • UEXT connector
  • Eight user leds
  • Two user buttons
Reset button
Prototype area
FR-4, 1.5 mm, soldermask, component print
Dimensions:80x50mm (3.15 x 1.97")

NXP LPC-MT-2138

NXP LPC-MT-2138
DEVELOPMENT BOARD FOR LPC2138 ARM MICROCONTROLLER



FEATURES
  • MCU: LPC2138 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 32K Bytes RAM, RTC, 8x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
  • JTAG connector as per ARM's 2x10 pin layout, ARM-JTAG (Wiggler) compatible
  • 14.7456 Mhz crystal on socket, allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
  • RS232 interface circuit with SUB-D 9 pin connector
  • LCD16x2 display
  • Five buttons
  • Dallas iButton port
  • Frequency input
  • Relay with 10A/250VAC contacts
  • Buzzer
  • Status LED
  • RESET circuit
  • RESET button
  • Bootloader enable jumper and pullup
  • DEBUG jumper for JTAG enable/disable
  • RTCK pullup resistors
  • Power plug-in jack
  • Power supply: 9VAC/+12VDC
  • Three on board voltage regulators 1.8V, 3.3V and 5V
  • Power supply filtering capacitor
  • Four mounting holes
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions: 120x38 mm (4.75x1.5")

Wednesday, July 16, 2014

MS6511 Digital Thermometer

MS6511 Digital Thermometer

Features:
  • Large Dual LCD Display
  • Resolution: 0.1°C, 0.1°F, 0.1K
  • Built-In Ambient Temperature Compensation
  • Auto Power Off
  • MAX/MIN/AVG and Data Hold
Specification
MS6511



Thermocouple type
K, J, T, E



Channel
Single



Measurement Range
K:-200.0℃ to +1372℃ / -328.0℉ to +2501℉
J:-210.0℃ to +1200℃ /-346.0℉to +2192℉
T:-250.0℃ to +400℃ /-418.0℉to +752℉
E:-150.0℃ to +1000℃ / -238.0℉ to +1832℉
R:0℃ to +1767℃ / 32℉ to +3212℉
S:0℃ to +1767℃ / 32℉ to +3212℉
N:-200.0℃ to +1300℃ / -328.0℉ to +2372℉
Resolution
0.1℃, 0.1℉, 0.1K
Accuracy
±(0.5% +0.5℃)
K,J,T,E:±(0.2%+0.5℃)
R,S:±(0.2%+1℃)
N:±(0.2%+0.5℃)
Data Logging

1000 groups
Ambient Temperature
Compensation
√
√
√
√
Auto Power Off
√
√
√
√
MAX/MIN/AVG
√
√
√
√
DATA Hold
√
√
√
√
USB Interface


√
√
General
Power Supply
1×9V 6F22
1×9V 6F22
3×1.5V AAA
1×9V 6F22
Product Size
190×89×42mm/
7.5”×3.5”×1.7”
190×89×42mm/
7.5”×3.5”×1.7”
190×89×42mm/
7.5”×3.5”×1.7”
190×89×42mm/
7.5”×3.5”×1.7”
Product Weight
350g/0.8lb
350g/0.8lb
350g/0.8lb
350g/0.8lb
Category
CE
CE
CE

Monday, July 14, 2014

SPC Keymatic module

SPC Keymatic  is a module for receiving input from the keyboard or keypad and generate data that largely correspond to ASCII. Compatible with DT-51 MinSys and accompanied by ready-made routines. 


specifications: 
- Based Smart Controller SPC.
- Has I2C and Parallel interfaces.
- Can be addressed and developed up to 4 modules in one system.
- Most of the character code corresponding to the ASCII code.
- Each module can be used to receive data keyboards and keypads.
- Dimensions: 7.4 cm (P) x 4 cm (L) x 1.5 cm (T)

Sunday, July 13, 2014

SPC low cost DC motor driver

SPC DC motor is a DC motor driver that is compatible with +5V logic  Minimum System and comes ready-made routines. Can be used to control a DC motor up to 16 pieces in one system.

specifications: 
- Based Smart Controller SPC.
- Has a 4-lane interface and I2C Parallel.
- Can be expanded up to 8 modules in one system.
- Each module can be used to control up to two DC motors.
- Have the ability to read the input speed of the motor.
- Speed ​​Encoder with a resolution of 8 pulses / rev.
- Dimensions: 6.6 cm (P) x 5.6 cm (L) x 1.4 cm (T)

Saturday, July 12, 2014

MS6505 digital temperature and humidity meter

MS6505 digital temperature and humidity meter

Features
• Numerical display: 4 digital liquid crystal display
• RS232 standard interface
• Data Hold
• Data Logger
• Max/ Min value measurement
• Clock function
• Auto Power Off
• Backlight
• Measurement range: Humidity: 0% ~ 100% RH,
• Measurement range: Temperature: -20° C ~ + 60° C, -4° F ~ + 140° F
• Resolution: Humidity: 0.1% RH, Temperature: 0.1° C, 0.1° F
• Accuracy: Humidity: ± 2.5% RH at 25° C, Temperature: ± 0.7° C, ± 1.4° F
• Response time: Humidity: 75sec. in slowly moving air
• Response time: Temperature: 40sec. in slowly moving air
• Power: Battery: 9V ( 6F22) x 1
• AC Adapter: 9VDC/ 30mA minimum plug diameter: ¦ 3.5mmx1.35mm
• Dimensions: Meter: 183( L) x74( W) x33( H) mm, Sensor Probe: 208( L) x15( D) mm
• Weight: approx. 330g ( including battery)

MS6508 TEMPERATURE AND HUMDITY METER

MS6508 TEMPERATURE AND HUMDITY METER

Features:

  • Pocket Size
  • Tests Ambient Temperature and Relative Humidity
  • Wet Bulb and Dew Point
  • °C / °F Selection
  • Data Hold and Display Back Light
  • MAX/MIN and Data Logging up to 100 groups

Specification
Ambient Temperature

Range: -20 to 60℃(-4 to 140℉)
Accuracy:±1.0℃ on 0 to 45℃
    ±1.5℃ on -20 to 0℃,45 to60℃
Resolution: 0.1℃/℉
Relative Humidity

Range: 0 to 100% RH
Accuracy:±3.0% RH(10 to 90%)
    ±4.0% RH (0 to 10%, 90 to 100%)
Wet Bulb Temperature
Range : -20 to 60℃(-4 to 140℉)
Accuracy:±1.0℃ on 0 to 45℃
    ±1.5℃ on -20 to 0℃,45 to60℃
Resolution: 0.1℃/℉
Dew Point Temperature

Range : -50 to 60℃(-58 to 140℉)
Accuracy:±1.0℃ on 0 to 45℃
    ±1.5℃ on -50 to 0℃,45 to60℃
Resolution: 0.1℃/℉
Update Rate: 400ms
℃ / ℉ Selection
Data Hold
Display Backlight
MAX/MIN Mode
Data Logging and Recall: 100 group