Friday, May 02, 2014

ITC-18A IC Test Clip - 18 Pin.

ITC-18A IC Test Clip - 18 Pin

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

I2C ADDA , digital to analog converter or vice versa

I / O modules that provide data conversion Digital to Analog or Analog to Digital. Based PCF8591 which has 4 channels 8-bit ADC and 1 channel 8-bit DAC. 


specifications: 
- Data Power supply: 5VDC
- Based PCF8591
- 4 channels 8-bit ADC and 1 channel 8-bit DAC
- I2C Interface (may be combined with up to 8 devices on the same bus line)
- Fully compatible with the DT-51 Minimum System
- Can also be connected with mikrokotroler AVR, PIC or the other.

RoboteQ ax500 2-Channel Motor Controller.

RoboteQ ax500 2-Channel Motor Controller.

Roboteq's AX500 controller is designed to convert commands received from a R/C radio, Analog Joystick, wireless modem, or microcomputer into high voltage and high current output for driving one or two DC motors.

The controller's two channels can either be operated independently or mixed to set the direction and rotation of a vehicle by coordinating the motion on each side of the vehicle. The motors may be operated in open or closed loop speed mode. Using low-cost position sensors, they may also be set to operate as heavy-duty position servos.

The controller can be reprogrammed in the field with the latest features by downloading new operating software from Roboteq.

Operating Voltage12V to 24V DC
Number of Channels2
Current7.5A Continuous, 15A Max, 30A Surge
Current LimitingBy automatic power output reduction according to user preset limit and temperature
Temperature protectionAutomated current limit reduction starting at 80o C (175o F) heat sink temperature
Voltage protectionOutput shut off below 8V
Power WiringTerminal strip. AWG 14 max cable
R/C inputs2 + 1 accessories (1.0ms - 1.5ms center - 2ms, Adjustable)
Serial InterfaceRS232. 9600 bauds
Analog Interface2 inputs (0V - 2.5V center - 5V) 4 inputs, 8-bit resolution
Input CorrectionsCh1 & Ch2 mixing for tank steering. Programmable deadband. 4 Exponent & Logarithmic command curves.
Digital Outputs1 output, 24V 1A max
Open Loop SpeedForward & Reverse Speed Control. Separate or Mixed
Closed Loop Speed
Use Tachometer on analog inputs & PID
Position ModeUse Potentiometer on analog inputs & PID
Operating Temperature-40 to +85oC heat sink temperature
Dimensions4.2" (106mm) wide
2.9" (50mm) long
1.5" tall (38mm) tall including heat sink
Weight3 oz (85g)

Thursday, May 01, 2014

Mastech MS6208A Digital Tachometer (contact)

MS6208A Digital Tachometer (contact)

Features:
  • Pocket Size
  • Contact sense
  • Auto Power Off
  • Data Logging up to 100 groups
  • Data Hold and Display Back Light

Specification:
Contact measurement
50~19999RPM
 ±(0.03%+2)
Non-contact measurement (photo)
N/A 
Measuring distance
N/A
Auto power off
30s
MAX/MIN/AVG functions
√
m/min m/sec ft/min ft/sec in/min
unit selection
√
Data Logging
100 groups
Data Hold
√
Display Backlight
√
Low Battery Display
√

Mastech MS6208B Digital Tachometer.

MS6208B Digital Tachometer (Photo)


Features:
  • Pocket Size
  • Photo sensor 
  • Auto Power Off
  • Data Logging up to 100 groups
  • Data Hold and Display Back Light






Specification:

Contact measurement (N/A)

Non-contact measurement (photo)
50~19999RPM
±(0.03%+2)
Measuring distance
50mm~250mm
Auto power off
30s
MAX/MIN/AVG functions
√

Robotis - Dynamixel MX-28T Servo (TTL) - 6pcs Bulk.


Robotis - Dynamixel MX-28T Servo (TTL) - 6pcs Bulk.


This is the 6pcs Bulk Pack. This pack is a Bulk pack offer at a discounted price.  ONLINE ORDER
The difference between this Bulk pack and the Stand alone MX-28 servos are the accessories: the 6pcs Bulk Pack does not include the Horn, Cables or Screws.
Horns and Cables for the 6pcs Bulk Packs may be purchased separately here:HN07-N101 Horn (for MX-28) | 3P Cables.

The Dynamixel MX Series servos feature a contactless (Magnetic) position encoder and PID control for superior accuracy and reliability. The MX series offers 12bit (4096) position resolution and can operate in the 360º range offering 0.008º resolution.

Dynamixel Servos are connected using a Daisy Chain mechanism and are queried and controlled with an advanced Serial protocol. Over 50 Read/Write parameters are available including Position feedback, Load feedback and PID tuning.

ModelMX-28T model - TTL level communication.
Weight72g
Dimension35.6mm x 50.6mm x 35.5mm
Gear Ratio193 : 1
Operation Voltage (V)101214.8
Stall Torque (N.m)2.32.53.1
Stall Current (A)1.31.41.7
No Load Speed (RPM)505567
MotorMaxon Motor
Minimum Control AngleAbout 0.088º x 4,096
Operating Range- Position Control Mode : 360º
- 
Wheel Mode : Endless turn
Operating Voltage10~14.8V (Recommended voltage : 12V)
Operating Temperature-5ºC ~ 80ºC
Command SignalDigital Packet
ProtocolHalf duplex Asynchronous Serial Communication
(8 bit, 1 stop, No Parity)
Link (physical)TTL level Multi Drop Bus(daisy chain type connector)
ID254 ID (0~253)
Baud Rate8000bps ~ 4.5Mbps
Feedback FunctionsPosition, Temperature, Load, Input Voltage, etc.
MaterialCase : Engineering Plastic
Gear : Full Metal
Position SensorContactless absolute encoder (Magnetic Encoder)
By default MX servos are set to ID1 and 57600bps; after purchase,
please change ID and baud rate according to your needs.

Dynamixel MX-64T Robot Actuator.

Dynamixel MX-64T Robot Actuator is the newest generation of Robotis Dynamixel actuator; equipped with an onboard 32bit 72mhz Cortex M3, a contact-less magnetic encoder with 4x the resolution over the AX/RX series, and up to 3mpbs using the new TTL 2.0 bus. 
Each servo has the ability to track its speed, temperature, shaft position, voltage, and load. As if this weren't enough, the newly implemented PID control algorithm used to maintain shaft position can be adjusted individually for each servo, allowing you to control the speed and strength of the motor's response. 

All MX Series servos use 12v nominal voltage, so MX Dynamixels can be mixed without having to worry about separate power supplies. All of the sensor management and position control is handled by the servo's built-in microcontroller. This distributed approach leaves your main controller free to perform other functions.


MX-64T Stats
Operating Voltage14.8V12V
Stall Torque74 kg·cm
1033 oz·in
7.3 N.m
61 kg·cm
849 oz·in
6.0 N.m
No-load Speed78 RPM63 RPM
Weight126g
Size40.2 x 61.1 x 41.0 mm
Resolution0.088°
Reduction Ratio1/200
Operating Angle360° or Continuous Turn
Max Current4.1A @ 12V
Standby Current100 mA
Operating Temp-5°C ~ 80°C
ProtocolTTL
Module Limit254 valid addresses
Com Speed8000bps ~ 3Mbps
Position FeedbackYes
Temp FeedbackYes
Load Voltage FeedbackYes
Input Voltage FeedbackYes
Compliance/PIDYes
MaterialMetal Gears &
Engineering Plastic Body
MotorMaxon RE-MAX


Controller ListUSB2Dynamixel
CM-700

Robotis HN07-I1 RX-28 Bearing Set (N1 Type)

Supplies bearings for  Dynamixel RX-28H  servo motor

Sales package: 
- RX-28 HN07-I1: 1 set
- BEARING MF106ZZ: 1 set
- RX28 CAP BEARING: 1 set
- Wrench Bolt (WB M2.5 * 8): 1 set
- Wrench Bolt (WB M2 * 3): 6 pcs

Wednesday, April 30, 2014

Dual Power Soldering Gun Goot KYP-60/22

Goot KYP-60/22 is dual power soldering iron (30 W / 60 W) with nichrome heater designed for ease of operation with the pistol grip handle.

FEATURES

  • Compact and lightweight, easy to use soldering iron.
  • Long-life black tip.
  • While pressing the trigger, high power (60 W) makes soldering of connectors and terminals easy. Hold no longer than 10 seconds.
  • When releasing the trigger switch, low power (30 W) allows soldering of electronic components without damage.
  • Heat insulation cap allows for storing after completing the operation (3 mins. after operation).

TECHNICAL SPECIFICATIONS

Voltage220-240 V AC 50/60 Hz
Power ConsumptionTrigger ON 60 W / Trigger OFF 30 W
Length175 mm
Weight160 g (w/o cord)

GS-104 goot desoldering pump / tin sucker

GS-104 goot desoldering pump / tin sucker

Self-cleaning Shaft
When set, the shaft emerges from the nozzle so that solder does not collect there.

Shaft Lock
Can be stored away quickly, easily and compactly by pushing the shaft inside the chamber while pressing the Vacuum Release button.