BC-2000 Access Controller

BC-2000 Access Controller

Tech Specs:

• Exquisite designs with non-masking Metal shell
• Waterproof and weather resistant functions
• keystroke backlight
• Card appliance:125kHz EM cards
• Reading range:up to 5 cm
• Application:luxurious office building,bank,Prisons
• Change Codes 1 master,1000 users & prox cards
• Door open detection
• Door relay time 00-99 seconds
• Alarm time 00-99 minutes
• Electric Lock
• External Bell
• External Push Switch
• Magnetic Contacts
• Alarm
• Non volatile Eeprom memory

BC 6000 RFID acess control

BC 6000 RFID acess control
Multi-functions ,Integrated with pin keyboard ,Chinese read head ,one-door access controller ,
T&A,two-door access controller.
Advanced technology ,steady quality.
Output/input of preventing of static electricity and current impulses, anti-jamming ,and preventing abnormal shut.

Dynamic setting ,flexible applications:

• 1 built-in card reader(EM or Mifare ),2 sets of W26 output .
• 2 sets of lock magnet inputs
• 1 set of interfaces for ring and 1 set of communication interfaces.
• 1 re-set I/O interface.

Chinese&English menu ,ease in operations , LED Chinese&English menu with backlight ,showing user's name and No Message publicizing functions. It can be set 16 s alarms ,can support workday setting .With choices of on-line or off-line with internet . Expertise makes big functions, Manage 2 doors with w26 output . Capacity:2500 cards , 25,000 records and alarms .A.P.C functions and function of just opening one door at one time .

Support card ,pin ,and card&pin three ways .Support setting emergency entry pin and super pins .
Alarm functions: opening-door overtime ,closing-door overtime, illegal entry alarm, duress alarms .

1 locket Queuing System

1 locket Queuing System

Available option:

• 2 digits or 3 digits 7 segment display
• 6cm or 10cm height of 7 segment display
• remote controller
• box controller

5V 1 Amp switching Adaptor

5 Volt 1 Ampere switching Adaptor.

Application:
general purpose

Single Fiber Arc Fusion Splicer ,Fujikura FSM 60S

Single Fiber FSM 60S Arc Fusion Splicer

Item Specifications:
Applicable fibers :SMF, MMF, DSF, NZDSF etc.
Cladding dia./ Sheathe dia. :80 to 150 mm / 100 to 1000mm
Splice mode :Total 100 modes
Automatic fiber identification :SMF, MMF, NZDSF
Splice loss estimate :Equipped
Attenuation splice :0.1dB to 15dB by 0.1dB step
Splice result storage :Last 2000 splices
Viewing methods :2 axis 2CMOS camera with 4.1” LCD
Tension test :1.96 to 2.25N
Protection sleeve :60mm, 40mm and Fujikura micro sleeves
Diagnostic function :Equipped

Long Range RFID I-CODE SLI Door Gate

The I-CODE SLI door gate , long range RFID reader , ISO 15693

Specifications:
- Inter antenna distance (gate wide) : 60 - 140cm
- human height distance : 120 - 200cm
- anti collision upto 240 tag
- equipped with infra red sensor
- RS-232 interface connected to PC for collect data ( R/W )
- Power supply : 220V AC, 10watt

Brightek WH500A serial universal programmer

Brightek WH500A serial universal programmer

The WH-500A superior performance programming summarized as follows:

1. More than 1000 kinds of chips to support the offline copy, covers almost all kinds of chips (including the latest trends in a variety of commonly used chip, such as 87lpc762/764, etc.), and continued to upgrade the service to enjoy! Please keep browsing http://www.whkj.com.cn or http://www.brightek.com.cn

2. Can line of work (research programmer), but also to work independently off-line one-touch (more suitable for mass production using non-professionals), and automatically switch the two modes.

3. Program has a built-4M high reliability electronic disk (data as long as 80 years), the electronic trading data preserved the use of encryption algorithm, and the prohibition of the software read out the calibration operation. Procedures to prevent electronic data disc piracy operators.

4. Copy by setting the number of software counters, when off-line copy number of the provisions of films, the opportunities for self-destruction of electronic copies of the data set. Definitely put an end to the chip with the loss of program data.

5. Electronic disk with the programmer using the internal high-speed parallel bus to transmit data over computer print-mouth communications 20 times faster. Effectively improve the efficiency of chip programmer.

6. Control software to allow users to set up a free copy of the operation, such as the new chip can be erased omitted, all blank check operation, so as to shorten the time to copy and improve efficiency.

7. Cloner parallel to the work of more than than a single programmer to write more efficient and much cheaper prices, and support a wider range of devices. Currently on the market more than a programmer to write parallel structure in general, if a chip which will lead to problems of all the chip programming adapter failure or unreliable, the cloner of parallel low cost structure, but the user will have serious hidden abroad has long been out of the structure of the programmer.

LEGO Mindstorms NXT 2.0 (8547)

Lego Mindstorms NXT is back and better than ever, with new robot models, even more customizable programming, and all-new technology including a color sensor. Mindstorms NXT 2.0 combines the unlimited versatility of the Lego building system with an intelligent microcomputer brick and intuitive drag-and-drop programming software. The new 2.0 toolkit features everything you need to create your first robot in 30 minutes and then tens of thousands of other robotic inventions that do what you want.

Product Features

* The intelligent NXT Lego brick features 32-bit microprocessor, a large matrix display, 4 input and 3 output ports, and Bluetooth and USB communication link; batteries not included
* Three interactive servo motors; four sensors (Ultrasonic Sensor, 2 Touch Sensors and the all-new Color Sensor)
* Color Sensor has triple functionality: Distinguishes colors and light settings, and functions as a lamp
* Easy-to-use software (PC and Mac) with icon-based drag-and-drop programming and 16 fun building and programming challenges; building instructions for 4 new amazing robots
* 612 pieces

AX-12 PIC12F675 microcontroller Activity board

AX-12 , PIC12F675 microcontroller Activity board

Microcontroller unit features :
�� Microchip’s 8-pin PIC microocntroller PIC12F675 on-board
�� 1KWord Program memory
�� 4MHz Internal clock
�� 4-Ch. 10 bit Analog to Digital Converter
�� 128-Byte Internal EEPROM
�� 2 Timer-Counter
�� 6 I/O maximum in Internal clock mode
�� Support In-system programming via Parallel port

Experiment unit features :
�� 3- Push button
�� 8-LED and 1-Digit LED display owrk with Shift register IC, select the display with jumper.
�� Small Stepper motor driver
�� Piezo speaker
�� Analog demonstrated by a variable resistor
�� RS-232 serial port interface
�� Inteface with one wire bus and iButton
�� Use +12V (+18V unload) 500mA
�� Polarity protection.

PX-17V3.0 Parallel port dsPIC/PIC Programmer

PX-17V3.0
Parallel port dsPIC/PIC Programmer

Interface PC’s parallel port. Program target dsPIC/PIC microcontroller with ZIF socket and via ICD jack (compatible ICD2).

Support :

• PIC10Fxxx (via ICD2 jack)
• PIC12Cxx,12Fxxx
• PIC16Cxxx,16Fxxx,
• PIC18Cxxxx,18Fxxxx,
• dsPIC30Fxxxx

Includes :
Programmer board with base, Parallel port cable, ICD cable, DC adaptor, CD-ROM and Documentation.