LAN 10/100 to FO Converter (WDM)

Ethernet / LAN 10/100 to WDM Fiber (Wavelength-division multiplexing) 1310/1550nm

Technical Specs:

• FO Connector : SC type
• WDM 1310/1550nm
• FO option support to 20, 40 or 60KM
• LAN 10/100 base TX/FX

10/100 LAN to Fiber Optic media converter

10/100 LAN to Fiber Optic media converter

Hardwar Specifocation:


-Support Single mode Fiber Optic up to 60KM
-SC Connector for FO (TX - RX port for FO)
-10/100 Base-TX/FX Bridge ( 1 LAN port)

Gigabit media Converter with SFP slot

Gigabit media Converter with SFP slot

Hardware Specification:

• SFP slot 1 port
• LAN/ Ethernet Gigabit (1000Mbps) 1 port
• DC power adaptor port ( include Adaptor)
• Led Indicator

WDM LX to LAN 10/100Mbps media Converter

Wavelength-division multiplexing (WDM) single mode to ethernet 10/100 Media Converter

Specs /option hardware

• support 40KM or 60KM
• 4 ethernet or Lan port
• 10/100Mbps
• single mode Fiber (LX)
• 1310/1550nm wavelength

serial cables for cisco router

CAB-SS-V35MT   = Smart Serial cable to V35 male terminal


CAB-SS-X21MT   = Smart Serial cable to X21 male terminal


V.35 to V.35 Straight Cable 50 Feet   =V35 to V35 straight full cable


CAB-V35MT    =Serial cable V35 male terminal


CAB-X21MT    =Serial cable X21 male terminal


DB 25 STRAIGHT 1.5M Cable   = DB25 straight full cable (paralel port)
DB60 Crossover Cable 1 m    =DB60 back to back cross cable
Null Modem Cable ( DB9~DB9)    = serial null modem cable db9
CAB-OCTAL-MODEM    = serial octal cable
SS Crossover Cable 1 m    = smart serial back to back cross cable
Cisco Console Cable    = serial console cable

Solar Cell Amorphous

Amorphous solar cell outdoor . ( also available indoor type ). reliable and durable solar cell or solar panel with short circuit protection.

Amorphous 5.2V/21mA (Outdoor) specs:

• Dimension 54.9mmx 29.2mm
• Operating Voltage (Vop) 3.5V
• Operating current (Iop) 16mA
• Open Circuit Voltage (Voc) 5.2V
• Short Circuit current (Isc) 21mA
• Thickness 1.1mm

Amorphous 8V/30mA (Outdoor) specs:

• Dimension 70.0mmx 55.0mm
• Operating Voltage (Vop) 6.0V
• Operating current (Iop) 22mA
• Open Circuit Voltage (Voc) 8.0V
• Short Circuit current (Isc) 30mA
• Thickness 2mm

Amorphous Indoor 4V 17uA (indoor) specs:

• Dimension 55.0mmx 20.0mm
• Operating Voltage (Vop) 3.0V
• Operating current (Iop) 14uA
• Open Circuit Voltage (Voc) 4.0V
• Short Circuit current (Isc) 17uA
• Thickness 1.1mm

Amorphous 10V 30mA outdoor specs:

• dimension : 70mm x 55mm x 2mm
• output voltage 10V
• output current 30mAmp

The ELAB-080 dual channel oscilloscope with logic analyzer

ELAB-080 integrates a dual channel Digital Oscilloscope, 16 Channel Logic Analyzer, Arbitrary Waveform Generator, Digital I/O and a dual channel power supply all in one convenient package!!

ELAB-080 Quick Specifications

• Number of DSO Channels 2
• Number of LA Channels 16
• Number of AWG Channels 1 Analog, 5 Digital
• Number of Digital Clock 2
• Number of PS Channels 2
• Maximum Sample Rate 80 MS/s
• Maximum Memory Depth 32K samples
• DSO Vertical Resolution 8 bits
• -3dB analog BW
• DC coupled: DC to 60MHz
• AC coupled: 1Hz to 60MHz

Modern PCs provide the power and sophistication that test and measurement equipment need. The ELAB-080 package comes complete and ready to use with the instrument, two oscilloscope probes, logic analyzer and AWG cabling and a USB cable. All you need to supply is the PC and you have a powerful test system. Electrical engineers in the 21st century need 21st century equipment that doesn't cost an arm and a leg.

PC-Based

PC-based instruments use the power and interface of a computer without the bulkiness and cost of traditional bench top equipment.

Compact Size

The ELAB-080 is an extremely powerful unit packed into a very small package. Weighing approximately 1.4 pounds, the ELAB is easily moved from place to place whether your in the office or out in the field.

Fast Sampling Rate

Boasting an 80MHz sampling rate and 32K sample storage on each of two DSO channels.

Driverless operation

The ELAB utilizes a HID driver so there is no requirement to install a new driver every time you move your equipment or change computers. It's as simple as plug in and start using. This also allows makes the ELAB less susceptible to driver conflicts and errors.

Included with the ELAB-080

• Two 60MHz Oscilloscope Probes
• Complete Wiring Harnesses
• Power Supply
• USB Cable

Protek DSO-2090, usb digital storage oscilloscope

Protek DSO-2090 PC based Digital Storage Oscilloscope 40MHz, Sampling Rate: 100MS/s

General Specifications

• Maximum sampling rate Realtime sampling 100MS/s
• Bandwidth 40MHz(-3dB)
• Single shot bandwidth 40MHz
• Buffer size 32K samples
• Channels 2 Channels
• Voltage Range 10mV ~ 5V/div @ 1 probe
• 100mV ~ 50V/div @ 10 probe
• 1V ~ 500V/div @ 100 probe
• 10V ~ 5000V/div @ 1000 probe
• Accuracy ±3%
• Timebase Range 4ns/div ~ 1h/div (1-2-4 sequence)
• Offset Level +/-4 Divisions
• Coupling AC, DC, GND
• Impedance 1M ohm
• Input protection 35Vpk(DC + peak AC; Without external attenuation)
• Roll Mode 1s/div ~ 1h/div
• Range 10 Divisions
• Pre/Post Production 0% ~ 100%
• Trigger TYPE Edge trigger: Rising edge, Falling edge
• Trigger mode Auto, normal, and single
• Autoset Yes
• Settability 0.03 div increments
• Trigger Level +/-4 division
• Measurements Vp-p, Vmax, Vmin, Vmeans, Vrms, Vamp, Vhigh, Vlow, positive overshoot, negative overshoot, cycle mean, cycle rms, period, frequency, positive pulse width, negative pulse width, rise time (10% ~ 90%) fall time (10% ~ 90%), positive duty cycle, negative duty cycle
• Cursor Time/frequency difference, voltage difference
• Math Addition, Subtraction, multiplication, Division
• FFT Rectangular, Hanning, Hamming, Blackman Window
• Interface Universal Serial Bus (USB)
• Power No external source required
• Bus-powered from USB1.7W)
• Calibration Signal Output 2V, 1kHz, Square Wave
• Trace Display Point/Line
• Vertical Position Variable Yes
• Grid On/Off
• File Management Image save: .BMP, .JPG
• Data Save: .dso
• OLE (Object Linking and Embedding) automation: Data generation for Microsoft excel
• Setting save/load
• Print Print in color/mono

Tektronix TDS1012B , 100MHZ Digital Storage oscilloscope

The TDS1000B and TDS2000B Series The simple user interface with classic Control digital storage oscilloscopes deliver an analog-style controls makes these instru- Service and Repair unbeatable combination of performance ments easy to use, reducing learning time *1 Limitations apply. For terms and conditions, visit

and ease-of-use at a price you can afford. and increasing efficiency. 

Innovative features such as the Autoset Menu, Probe Check Affordable Digital Precision Wizard, Context-Sensitive Help Menu With up to 200 MHz bandwidth and and color LCD display (TDS2000B Series) 2 GS/s maximum sample rate, no other optimize instrument setup and operation. color digital storage oscilloscope offers as much bandwidth and sample rate for the Flexible Data Transfer price. The TDS1000B and TDS2000B With USB host and device ports which Series oscilloscopes provide accurate enable removable data storage, seamless real-time acquisition up to their full band- PC connectivity, and direct printing, no width, the same record length at all time other color or monochrome digital storage base settings, advanced triggers to isolate oscilloscope offers as much flexibility signals of interest, and 11 standard auto- and ease of data transfer for the price. matic measurements on all models. Their Fast Fourier Transform (FFT) and wave- form add, subtract, and multiply math functions allow you to analyze, characterize and troubleshoot circuits.

HiTec HSR-8498HB Robot Servo

This digital servo motor is the the foundation component of the Robonova robot, though it is well suited for a wide range of robotics applications.

The servo motor comes with a selection of accessories that allow the motor to be custom configured for your application. Out of the box, the motor is configured with an idler shaft. The horn spline is 24 segments at 5.76° pitch. The internal drive train consists of Karbonite gears with dual ball bearings. Angular rotation is 180°. The servo weighs 54.7 gm (1.929 oz).

Specifications
Voltage	Output Speed	Output Torque	Dimensions
6.0 V	0.20 sec/60°	0.726 Nm	40 x 20 x37 mm (1.57 x .79 x 1.46 in)
7.4 V	0.18 sec/60°	0.883 Nm	40 x 20 x 37 mm (1.57 x .79 x 1.46 in)