Tuesday, February 15, 2011

ISO-U2-P1-O2 isolated voltage to current converter

ISO-U2-P1-O2 voltage to current converter
Specification:
ISO series DC voltage isolated amplifier is a kind of IC that can convert DC voltage to output current or voltage that according to comparison with no relationship with load. It’s widely used in Electric power, distant control, instrument, medical instrument, and industrial control industries.

This photoelectricity isolation is with good anti-jamming capability Efficiency grade0.1, 0.2, 0.5 ,0-10mA/0-20mA/4-20mA isolated signal of international standard signal input and output.Output  voltage signal: 0-5V/0-10V/1-5V;Output current signal0-10mA/0-20mA/4-20mA.With high load capability. Extremely high linearity in whole process (nonlinearity < 2%).

General characteristic:
● Low cost,small size,SIP 12 anti- fire UL94V-0 package
● Can adjust “Zero”and “Gain”
● Three-port (power/input/output) isolation:3000VDC
● Assistant power:5VDC/12VDC/15VDC/24VDC
●0-5V/0-10V/0-±100mV/voltage signal or 0-10mA/0-20mA/4-20mA/ current signal isolation and transfer
● Temperature range: -45~+85 ℃
● with good anti-jamming EMC and high frequency signal capability 

Applications: 
● DC current/voltage signal isolated/transfer/amplifier
● No distortion in long distance signal transmission 
● Analog signal data acquisition 
● 0-20mA/0-5V signal isolation and transfer
● Equipment and sensor signal acquisition
● Signal transmit no-distortion
● Electric power,distant control,isolated safe bar 
● 4-20mA sensor analog signal transmission
● Ground interference control

Related Product:
ISO-U1-P3-O1  = isolated voltage 0-5V to current 4-20mA Converter
ISO-U2-P3-O4 = isolated voltage 0-10V to voltage 0-5V Converter
ISO-A4-P3-O4 = isolated current 4-20mA to voltage 0-5V Converter
ISO-Z1-W5-P3-O4 = isolated thermal resistance to voltage converter

Symbol/Code:
U1 = Voltage 0-5V
U2 =  Voltage 0-10V
U3 = Voltage 0-75mV
U4 = Voltage 0-2.5V
U5 = User Defined Voltage

P1 = Power Supply 24VDC
P2 = Power Supply 12VDC
P3 = Power Supply 5VDC
P4 = Power Supply 15VDC
P5= User Defined Power Supply

O1= output 4-20mA
O2= output 0-20mA
O3= output 4-12-20mA

O4= output 0-5V
O5= output 0-10V
O6= output 1-5V
O7= Used Defined output

WIZ812MJ

WIZ812MJ is the network module that includes W5100 (TCP/IP hardwired chip, include PHY), MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 and Transformer. The WIZ812MJ is an ideal option for users who want to develop their Internet enabling systems rapidly. For the detailed information on implementation of Hardware TCP/IP, refer to the W5100 Datasheet.

Features 

 Supports 10/100 Base
 Supports half/full duplex
 Supports auto-negotiation and auto cross-over
 IEEE 802.3/802.3u Compliance
 Operates 3.3V with 5V I/O signal tolerance
 Supports network status indicator LEDs
 Includes Hardware Internet protocols: TCP, IP Ver.4, UDP, ICMP, ARP, PPPoE, IGMP
 Includes Hardware Ethernet protocols: DLC, MAC
 Supports 4 independent connections simultaneously
 Supports MCU bus Interface and SPI Interface
 Supports Direct/Indirect mode bus access
 Supports Socket API for easy application programming
 Interfaces with two 2.54mm pitch 2 x 10 header pin
 Temperature : 0 ~ 70℃ (Operation), -40 ~ 85℃ (Storage)

Monday, February 14, 2011

SRF10 Ultrasonic range finder

SRF10 Ultrasonic range finder
Communication with the SRF10 ultrasonic rangefinder is via the I2C bus. This is available on popular controllers such as the OOPic and Stamp BS2p, as well as a wide variety of micro-controllers. To the programmer the SRF10 behaves in the same way as the ubiquitous 24xx series eeprom's, except that the I2C address is different. The default shipped address of the SRF10 is 0xE0. It can be changed by the user to any of 16 addresses E0, E2, E4, E6, E8, EA, EC, EE, F0, F2, F4, F6, F8, FA, FC or FE, therefore up to 16 sonar's can be used.

The connections to the SRF10 are identical to the SRF08. The "Do Not Connect" pin should be left unconnected. It is actually the CPU MCLR line and is used once only in our workshop to program the PIC16F87 on-board after assembly, and has an internal pull-up resistor. The SCL and SDA lines should each have a pull-up resistor to +5v somewhere on the I2C bus.

By default, this is 65mS or the equivalent of 11 meters of range. This is much further than the 6 meters the SRF10 is actually capable of. It is possible to reduce the time the SRF10 listens for an echo, and hence the range, by writing to the range register at location 2. The range register can be set in steps of about 43mm (0.043m or 1.68 inches) up to 11 meters.

Devantech SRF01 Ultrasonic range finder

The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB. Connection is to a single pin Serial interface. The serial interface is a standard TTL level UART format of 1 start, 1 stop and no parity bits, and may be connected directly to many controllers, such as the Basic Stamps or the PICAXE. Baud rate at power-up is always 9600, there is a command to change this to 19200 or 38400 baud if preferred. Up to 16 SRF01's may be connected together on a single bus. Like all our rangefinders, the SRF01 can measure in Cm or Inches.
The SRF01 can measure from 0 to 600cm (0-6meters).

MikroTik RouterBOARD 1100 / RB1100

MikroTik RouterBOARD 1100 RB/1100
tech specs
• CPU - PowerPC MPC8544 network processor
• Memory - SODIMM DDR slot, 512MB installed (supports up to 1.5GB)
• Ethernet - Thirteen 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
• Ethernet - Includes switch to enable ethernet bypass in two ports
• MiniPCI - none
• Storage - Two microSD slots
• Serial port - One DB9 RS232C asynchronous serial port
• Extras - Reset switch, Beeper
• Power Optioins - IEC C14 standard connector 110/220V
• Fan- Dual fan with failover support mounted at case back
• Dimensions- 1U case: 45 x 75 x 440 mm, 1185g. Board only: 375g
• Operating System - MikroTik RouterOS v4, Level 6 license

Friday, February 11, 2011

Dynamixel Sensor Module AX-S1

Dynamixel Sensor Module AX-S1


Description
Add more sensors to your Bioloid! The AX-S1 is housed inside the same casing as the AX-12 BUT the AX-S1 doesn't contain a motor - it is simply a sensing module that can be placed on the same serial network. The AX-S1 consists of:
  • an IrDA receiver for robot-to-robot communication,
  • 3 IR reflection sensors (Left, Right & Front) that can be used to measure distance and luminosity,
  • a microphone, and
  • a piezo-electric sounder that can be used to play musical scales or simple a beeping sound.
This actuator is meant to be used with the Bioloid system.  To see all of our Bioloid products, follow this link

Specs
Weight 37g
Resolution 10bit (1024)
Voltage 7V~10V (Recommended voltage: 9.6V)
Supply Current 40mA
Operating Temperature -5˚ ~ 85˚ C
Command Signal Digital Packet
Protocol Type Half duplex Asynchronous Serial Communication (8bit,1stop,No Parity)
Link (Physical) TTL Level Multi Drop (daisy chain type Connector)
ID 254 Possible ID's (0~253)
Communication Speed 7343bps ~ 1 Mbps
Feedback Infra-red Sensor, Internal Mic, Temperature, Input Voltage, IR Remocon Tx/Rx Data, etc.
Material Engineering Plastic

Dynamixel RX-24F , Intelligent Robot Actuator

 Dynamixel RX-24F , Intelligent Robot Actuator
The RX-24F Dynamixel Robot Servo Actuator- fully compatible with the RX-28 formfactor and protocol. Twice the speed, but with lower torque and voltage requirements! More than just a digital servo, it's a highly sophisticated robotic component. Each servo has the ability to track its speed, temperature, shaft position, voltage, and load. As if this weren't enough, the control algorithm used to maintain shaft position can be adjusted individually for each servo, allowing you to control the speed and strength of the motor's response. All of the sensor management and position control is handled by the servo's built-in microcontroller. This distributed approach leaves your main controller free to perform other functions.
RX-24F Stats
Operating Voltage 12V
Holding Torque 26 kg·cm
360 oz·in
No-load Speed 0.079 sec/60°
Weight 67g
Size 50.6 x 35.6 x 35.5 mm
Resolution 0.29°
Reduction Ratio 1/193
Operating Angle 300° or Continuous Turn
Max Current 2400mA
Standby Current 50 mA
Operating Temp -5°C ~ 85°C
Protocol RS485 Asynchronous Serial
Module Limit 254 valid addresses
Com Speed 7343bps ~ 1Mbps
Position Feedback Yes
Temp Feedback Yes
Load Voltage Feedback Yes
Input Voltage Feedback Yes
Compliance/PID Yes
Material Metal Gears &
Engineering Plastic Body
Motor Maxon RE-MAX

Thursday, February 10, 2011

RXM-SG GPS Module w/Ext Antenna

RXM-SG GPS Module w/Ext Antenna
The RXM-SG GPS Module provides a high quality, highly sensitive GPS receiver with an external antenna
to provide a complete GPS solution for both microcontroller and PC applications.The high-performance  SiRFstar III chipset features 20 parallel satellite tracking channels for fast acquisition of NMEA0183 data  for robotics navigation, telemetry or experimentation.  This GPS Module can connect to a microcontroller  For even a PC (via USB).      A Windows application provides a graphical display of the GPS data and can  even show your location on Google Maps (internet connection required). Four general purpose I/O pins  provide expansion for pin-intensive projects.

Features 
SiRFstar III chipset
Outputs raw NMEA0183 data strings to microcontroller
View data graphically on your PC via USB connection
200,000+ correlations
Low power consumption
High sensitivity (-159 dBm)
20 satellite tracking channels
Battery-backed SRAM
11-pin SIP header with breadboard-friendly 0.1” spacing

Key Specifications 
Power Requirements: 5 V @ ~50 mA (typical)
Communication: 3.3 V CMOS asynchronous serial @ 9600 baud default for microcontrollers, or USB for PC
Dimensions: 1.7 x 1.6 x 0.6 in (4.33 x 4.09 x 1.52 cm)
Operating temperature: -22 to +185 °F (-30 to +85 °C)

Application Ideas 
RoboMagellan robot competition
Fleet Management
Positioning and Navigation
Surveying

ADXL213 AE Dual axis accelerometer on a single IC

 ADXL213 AE Dual axis accelerometer on a single IC
GENERAL DESCRIPTION:

The ADXL213 is a low cost, low power, complete dual axis accelerometer with signal conditioned, duty cycle modulated outputs, all on a single monolithic IC. The ADXL213 measures acceleration with a full-scale range of ±1.2 g (typical). The ADXL213 can measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity).

The outputs are digital signals whose duty cycles (ratio of pulse width to period) are proportional to acceleration (30%/g). The duty cycle outputs can be directly measured by a microcontroller without an A/D converter or glue logic.Qualified for automotive applications

Innovative design techniques are used to ensure high zero g bias stability (typically better than 0.25 mg/°C), as well as tight sensitivity stability (typically better than 50 ppm/°C). The typical noise floor is 160 μg/√Hz, allowing signals below 1 mg (0.06° of inclination) to be resolved in tilt sensing applications using narrow bandwidths (<60 Hz).

The user selects the bandwidth of the accelerometer using capacitors C   and C   at the X and Y pins. Bandwidths of X   Y  FILT FILT 0.5 Hz to 250 Hz may be selected to suit the application. The ADXL213 is available in a 5 mm × 5 mm × 2 mm, 8-pad hermetic LCC package.


FEATURES
Dual axis accelerometer on a single IC chip
5 mm × 5 mm × 2 mm LCC package
1 mg resolution at 60 Hz
Low power: 700 μA at VS = 5 V (typical)
High zero g bias stability
High sensitivity accuracy
Pulse width modulated digital outputs
X and Y axes aligned to within 0.1° (typical)
BW adjustment with a single capacitor
Single-supply operation
3500 g shock survival


APPLICATIONS 
Automotive tilt alarms
Data projectors
Navigation
Platform stabilization/leveling
Alarms and motion detectors
High accuracy, 2-axis tilt sensing

Hitachi H48C 3-Axis Accelerometer Module

Hitachi  H48C 3-Axis Accelerometer Module

General Description

The Hitachi H48C 3-Axis Accelerometer is an integrated module that can sense gravitational (g) force of ±3g on three axes (X, Y, and Z). The module contains an onboard regulator to provide 3.3-volt power to the H48C, analog signal conditioning, and an MCP3204 (four channel, 12-bit) analog-to-digital converter to read the H48C voltage outputs. All components are mounted on a breadboard-friendly, 0.7 by 0.8 inch module. Acquiring measurements from the module is simplified through a synchronous serial interface. With the BASIC Stamp® 2 series, for example, this is easily handled with the SHIFTOUT and SHIFTIN

Features

• Measure ±3 g on any axis
• Uses MEMS (Micro Electro-Mechanical System) technology, with compensation for calibration-free operation
• Onboard regulator and high-resolution ADC for simple connection to microcontroller host - compatible with BASIC Stamp 2 series SHIFTOUT and SHIFTIN commands
• Free-fall output indicates simultaneous 0g an all axes
• Small, breadboard-friendly package: 0.7" x 0.8" (17.8 mm x 20.3 mm)
• Wide operational range: -25° to 75° C

Application Ideas

• Tilt measurement in robotics applications
• Multi-axis vibration measurement in transit and shipping systems
• Multi-axis movement/lack-of-movement for alarm systems