Showing posts with label Audio. Show all posts
Showing posts with label Audio. Show all posts
Thursday, March 01, 2018
Monday, January 08, 2018
Friday, June 16, 2017
Music Shield for Arduino
Music Shield is an Arduino compatible module that you can use to play music from micro SD. This module uses the VS1053B IC as its audio decoder, which IC can be used to decode audio files with MP3, WAV, MIDI, and Ogg Vorbis extensions. In addition, this module has also provided a library that will allow you to develop Arduino-based projects using this module.
Features:
- Using 5 VDC power supply
- Supports micro SD storage up to 2 GB capacity
- Compatible with Arduino / Seeeduino, Arduino Mega, and Seeeduino Mega
- Equipped with 2 push-push buttons and a knob switch
- Supports MP3, WAV, MIDI, and Ogg Vorbis audio formats
- Equipped I2S interface for external DAC
- Equipped 3.5 mm audio jack as audio output line
- The sound quality is amazing with the frequency response ± 1dB
- Meet FFC standards
Wednesday, June 07, 2017
Wednesday, May 24, 2017
PAM8610 2*10W Dual Channel HIFI Mini Audio Amplifier
With the original PAM8610 chip, PAM8610 chip is 10W (each channel) D-level stereo audio amplifier.
Specification:
Note: This amplifier board must first connect the speaker, then the other! . Otherwise will be burnedl!
- High-quality voice reproduction, low THD + N (0.1%) No filter. At 10V power supply with 8Ω load has 10% THD of 10W.
- Good PSRR, ultra-low noise output -90dB
- New type direct output drive speaker without needing low-pass filter.
- Low quiescent current, low EMI. Low power consumption, heat.
- With off / mute noise cancellation function.
- High efficiency of 90%, , operating voltage 7-13.5V, low THD + N, and low quiescent current,
- With over-current / temperature / short circuit protection
Specification:
- Work mode: high efficience D class
- Quiescent Current: 20mA
- Working efficiency: 90%
- Rated output power: 10W + 10W (8Ω)
- Frequency response: 20Hz to 50KHz
- Operating voltage: DC7.5-15V
- Recommended supply voltage: 12V
- PCB board size: (40 * 40) mm
- Weight One 24g
- Board include mute, sound volume, L R channel output, audio jack input, features.
Note: This amplifier board must first connect the speaker, then the other! . Otherwise will be burnedl!
Thursday, April 20, 2017
Tuesday, March 28, 2017
Wednesday, February 08, 2017
DFPlayer Mini - MP3 Player for Arduino
A DFPlayer an MP3 player module for Arduino That review has Small size and output can be paired Jump Into speaker. DFPlayer singer can be used as a stand-alone module WITH adding battery, speaker, and push button, OR can also using combination Arduino microcontroller lie And Yang has the ability TX / RX.
DFPlayer Singer supports multiple audio formats IN general, such as MP3, WAV, WMA and And has support micro SD WITH TYPE FAT16 and FAT32 file systems.
specification:
- Working voltage: 3.2 to 5 V
- Output: 24-bit DAC
- SNR: 85 dB
- Compatibility File Systems: FAT16 and FAT 32
- Maximum Storage Capacity: 32 GB Micro SD And NORFLASH 64 MB
- Control Mode: Mode Control I / O, serial mode, the mode button AD Controls
- Operates Audio Formats: MP3, WAV, WMA
- Period Audio Files: 255 Audio file (Maximum)
- Equalizer: level 6
- Volume: 30 levels
Wednesday, January 11, 2017
Speaker w/ mounting bracket & screws 3.5mm jack
A speaker kit that includes completed connector 3.5 mm audio jack as an audio signal input lines and mounting bracket which serves to facilitate you in installing these speakers to the wall, wooden planks, iron plate, and so forth. Because of their small size and relatively light weight then the speaker kit is easy to carry anywhere and are well suited for portable applications.
Specification:
- Connector Type: Audio jack 3.5 mm
- Weight: 210.8 g
- Black
- Features: Equipped with mounting bracket
Monday, December 19, 2016
Tuesday, November 22, 2016
ISD9160Fl micro audio chip
Special microcontroller for recording and processing audio data Nuvoton production. This microcontroller uses ARM Cortex-M0 core with 145kB APROM and 12kBSRAM. The advantages of this controller is to have many features that are devoted to process signals, such as: DAC, DPWM, PGA, PDMA, and pin for a digital microphone. ADC on this controller is equipped with features Sigma-Delta with 92dB SNR (Signal to Noise Ratio). Plus it features a Programmable Gain Amplifier (PGA) with a maximum gain of up to 61dB, making the processed audio signal is able to be directly connected to the microphone or speaker.
- Packaging LQFP-48
- 16-50Mhz working frequency (built in oscillator)
- Working voltage of 2.5V-5.5V
- Number of i / o 24 I / O
- ARMv6-M architecture (ARM-Cortex M0)
- Flash program memory sizes 145KBytes APROM, able to store 60 seconds of sound 16kbps
- Size 12KBytes volatile data memory SRAM
- The size of non-volatile data memory -
- Adc ADC pin special features (? S ADC, 80dB SNR (Signal to Noise), and Mic Interface)
- Peripheral DPWM (Differential Audio PWM), WDT (Watch Dog Timer), PWM, RTC, LDO (Low Dropout Voltage Regulator)
- Total external interrupt 2 Pin
- The timer / counter 2 x 24-bit timer with 8-bit pre-scaler
- Max speed 50MHz
- ISP programming interface with 4kbytes boot memory (shared with APROM)
- Debugger interface SWD (Serial Wire Debug)
- The interface peripherals UART, SPI, I2C, I2S
- Special Features Audio Analog to Digital Converters, Digital Michrophone interface, PDMA (pheripheral Direct Memory Access), PGA (Programmable Gain Amplifier)
Thursday, November 03, 2016
A93010 Voice Recording
20 seconds voice recording module, this module does not require software or support the microcontroller.
Specification:
- Paly back / recording: 20 seconds.
- Does not require battery backup.
- Supply: 5 VDC.
- Automatic power down.
- Built-in condenser mic.
- LED indicators for recording.
- 2 buttons to record and play back.
Monday, October 31, 2016
Tuesday, August 23, 2016
Neutrik NP3X Plug Audio TRS 1/4 inch Male
NP3X Neutrik 1/4 inch TRS Audio Plug Male
3 pole professional phone plug from Nuetrik highly suited for audio applications. This plug has contacts made of nickel and is protected by a shield made from nickel.
3 pole professional phone plug from Nuetrik highly suited for audio applications. This plug has contacts made of nickel and is protected by a shield made from nickel.
- Plug terminal type, 3 pole
- Shape (female / male) male
- Pin number 3 pole
- Cable mounting
- Contact Material Nickel
- Packaging materials Nickel
Sunday, August 21, 2016
Neutrik NC3FXX 1/4 inch Female XLR Audio Jack
NC3FXX 1/4 inch Neutrik XLR Female Audio Jack
Female XLR connector types NC3FXX of Neutrik. These connectors use the materials for connectors and nickel silver for its protective packaging. This connector is usually used for Audio.
- Type XLR terminal
- Shape (female / male) Female
- Pin number 3 pole
- cable mounting
- Contact Material Silver
- Packaging materials Nickel
Neutrik NC3MXX 1/4 inch Male XLR Audio Jack
NC3MXX 1/4 inch Neutrik XLR Male Audio Jack
Male XLR connector types NC3MXX of Neutrik. These connectors use the materials for connectors and nickel silver for its protective packaging. This connector is usually used for Audio.
Specs:
- Type XLR terminal
- Shape (female / male) male
- Pin number 3 pole
- cable mounting
- Contact Material Silver
- Packaging materials Nickel
Friday, February 26, 2016
TOA ZA-230W - PA POWER MIXER AMPLIFIER 30 WATT
The ZA-230W is a Power Amplifier well-suited for Broadcasting Paging and supplying Background Music in Restaurants, Pubs, Shops, Houses of Worship and so on.
| Power Source | AC 240V, 50Hz |
| Rated Output | 30W |
| Power Consumption | 34W (AC Operation) |
| Frequency Response | 50Hz ~ 20kHz |
| Distortion | 1% or less @1kHz, 1/3 rated output |
| Input | MIC 1 : -60dB* (1.0mV), 600Ω, Unbalanced, Equivalent to 5-pin DIN Type MIC 2 : -60dB* (1.0mV), 600Ω, Unbalanced, Equivalent to phone jack Type AUX 1, 2 : -20dB* (100mV), 10kΩ, Unbalanced, RCA pin jack |
| Output | Speaker out : Floating balanced High impedance : 330Ω (100V) Low impedance : 4Ω (11V) |
| S/N Ratio | 60 dB or more (MIC 1, 2) 70 dB or more (AUX 1, 2) |
| Tone Control | Bass : -10dB at 100Hz Treble : -10dB at 10kHz |
| Muting | MIC 1 overrides other Mic input and AUX inputs with 0 - 30 dB attenuation, attenuation by switch |
| Indicator | Power LED, Signal LED |
| Finish | Panel : ABS resin, black Hair Line Case : Steel plate, black |
| Dimensions (W x H x D) | 350 × 105 × 240 mm3 (13.78" × 4.13" × 9.45") |
| Weight | 3.5 kg (7.72 lbs) |
Music Shield V2.0
Time to build your real-time MIDI instrument/music player! It can play many format including MP3,WMA,WAV,AAC,MIDI,Ogg VorbisThe. Music Shield is an audio encoder/decoder compatible with Arduino, Seeeduino, Seeeduino Mega and Arduino Mega. It is based on the VC1053B chip, which enabled it to play sound files from SD card and do short-time recording as well. You can also use it to play MIDI notes by slightly changing its hardware installations. Due to the SPI communication mode, it keeps a minimum number of IO port that facilitates users’ own developments of this device. Additionally, the new multifunction button provides greater convenience for users to control.
Notice: The recording function works with Seeeduino Mega and Arduino Mega only. And the maximum size SD card you can use is 2GB.
Multifunction button: Change volume and select songs
Play/Pause indicator LED (GREEN):Blinks while playing.
Headsets interface: It can drive 16 ohm or 32 ohm earphone and could serve as a external audio input port.
Micro SD card: can be FAT16 or FAT32, The maximum size SD card you can use is 2GB.
U2: VS1053B IC,Ogg Vorbis/MP3/AAC/WMA/FLAC/MIDI audio codec.
U3,U7: 74VHC125 IC, Quad Buffer.
I2S: for digital audio input/output.
ISP interface: for bringing SPI port when using with Mega series products.
Pins usage on Arduino
Pins Used for Play Control:
D3 - receiving signal from button for Volume Up;
D4 - receiving signal from switch for Next Song function;
D5 - receiving signal from switch for Play&Stop and Record function;
D6 - receiving signal from switch for Previous Song function;
D7 - receiving signal from button for Volume Down.
D8 - Green Led instructions;
Pins Used for SPI Interface:
D10 - SPI Chip Select;
D11 - SPI MOSI;
D12 - SPI MISO;
D13 - SPI SCK;
Pins Used for VS1053 Interface:
A0 - Reset of VS1053;
A1- Data Require of VS1053;
A2 - Data Select of VS1053;
A3 - Chip Select of VS1053;
Sunday, January 31, 2016
Monday, October 12, 2015
VS1003B MP3 Board
The VS1003B MP3 Board offers a complete and cost-effective audio solution. The board features an MP3 decoder VS1003B with control interface, audio input/output connector for connecting microphone/headphone, and an onboard microphone.
Features:
- VS1003B,
- control interface,
- audio input/output connector,
- onboard microphone
Subscribe to:
Posts (Atom)
























