Showing posts with label Amplifier. Show all posts
Showing posts with label Amplifier. Show all posts

Sunday, February 25, 2018

PAM8403 2 X 3W 5V Mini Class D Audio Amplifier Board

Amplifier module (stereo) mini 2-channel class D with an output power of 3W. This module works on voltage level of 2.5V - 5.5V and is suitable applied to portable audio devices.

Specifications:
- Working Voltage: 2.5V - 5.5V 
- Impendasi Speaker: 4 Ohm - 8 Ohm (4 Ohm recommended) 
- Speaker Power: 2W - 8W 
- Dimensions: 21 x 18 x 3.4 mm

Thursday, November 02, 2017

Mini Amplifier 12VDC

mini audio amplifier based on IC TDA2003. This amplifier works at a voltage of 12 VDC and can produce a maximum power output of 10 W. It is suitable for beginners who want to learn to assemble the audio device itself.

Thursday, December 15, 2016

TPA0212PWP amplifier chip

TPA0212PWP a stereo audio amplifier packaged in a TSSOP-24 package. This amplifier is capable of capable of delivering a power of 2 watts RMS continuous basis in every channel. This amplifier works at a voltage level that is commonly used in the world of electronics that is 4.5 - 5.5 V, making it suitable TPA0212PWP once when used in applications portable audio amplifier, such as for example on the headphones and speakers.

Specification:
- Class: Class-AB
- Output Power: 2 W
- Mounting Type: SMD / SMT
- Packaging: HTSSOP-24
- Impendasi Load: 3 Ohm
- Noise: 0.65%
- Input Voltage: 4.5 - 5.5 V
- Working temperature: -40 - 85 ° C
- Applications: Headphone / Speaker
- Input Type: Differential
- Number of Channels: 2 Channels
- Workflow: 6 mA
- Working Voltage: 4.5 - 5.5 V
- Output Type: 2-Channel Stereo
- Disapasi Power: 2700 mW
- PSSR: 77 dB

Wednesday, September 07, 2016

NE5534P hi-Q opamp

NE5534P is an operational amplifier IC with high performance and low noise.

specifications:
- Bandwidth: 10 MHz
- Number of amplifier: one amplifier
- The rate of change voltage: 13 V / μs
- Supply voltage: 3 V - 20 V
- Packaging: DIP
- The number of pins: 8 pin
- Working temperature: 0 ° C - 70 ° C

Saturday, August 20, 2016

TDA8950TH/N1 Audio Power Amplifier

NXP  TDA8950TH/N1  Audio Power Amplifier, D, 2 Channel, 150 W, ± 12.5V to ± 40V, HSSOP, 24 Pins

The TDA8950TH/N1 is a high efficiency, two channel class D audio power amplifier in 24 pin HSOP package. The typical output power is 2 x 150W with speaker load impedance of 4ohm. For each channel, the audio input signal is converted into a digital PWM signal using an analogue input stage and PWM modulator. The TDA8950TH/N1 contains high power switches, drivers, timing and handshaking between power switches along with some control logic. To ensure maximum system robustness, an advanced protection strategy has been implemented to provide overvoltage, overtemperature and overcurrent protection. Each of the two audio channels contains PWM modulator, analogue feedback loop and differential input stage.
  • Symmetrical operating supply voltage range from ±12.5V to ±40V
  • Low quiescent current consumption of 50mA
  • Stereo full differential inputs, can be used as stereo SE or mono BTL amplifier
  • Thermal foldback (TFB)
  • Smooth pop noise free start up and switch off
  • Zero dead time switching
  • Fixed gain of 30dB in SE and 36dB in BTL applications
  • BD modulation in BTL configuration
  • Fully short circuit proof across load
  • Ambient temperature range from -40°C to 85°C

Sunday, August 14, 2016

TDA8943SF audio amplifier chip

7W Mono Audio Amplifier using a Bridge Tied Load.
Amplifier IC 1-Channel (Mono) Class AB 6W x 1 @ 8 Ohm 9-SIL MPFspecifications:
- Power supply: 6VDC - 18VDC
- Output: Mono
- Output Power: 7W
- Feature, Fixed gain, standy / Mute.
- Packaging: SIL9MPF


Friday, February 26, 2016

TOA ZA-230W - PA POWER MIXER AMPLIFIER 30 WATT

The ZA-230W is a Power Amplifier well-suited for Broadcasting Paging and supplying Background Music in Restaurants, Pubs, Shops, Houses of Worship and so on.

Power SourceAC 240V, 50Hz
Rated Output30W
Power Consumption34W (AC Operation)
Frequency Response50Hz ~ 20kHz
Distortion1% or less @1kHz, 1/3 rated output
InputMIC 1 : -60dB* (1.0mV), 600Ω, Unbalanced, Equivalent to 5-pin DIN Type
MIC 2 : -60dB* (1.0mV), 600Ω, Unbalanced, Equivalent to phone jack Type
AUX 1, 2 : -20dB* (100mV), 10kΩ, Unbalanced, RCA pin jack
OutputSpeaker out : Floating balanced
High impedance : 330Ω (100V)
Low impedance : 4Ω (11V)
S/N Ratio60 dB or more (MIC 1, 2)
70 dB or more (AUX 1, 2)
Tone ControlBass : -10dB at 100Hz
Treble : -10dB at 10kHz
MutingMIC 1 overrides other Mic input and AUX inputs with 0 - 30 dB attenuation,
attenuation by switch
IndicatorPower LED, Signal LED
FinishPanel : ABS resin, black Hair Line
Case : Steel plate, black
Dimensions (W x H x D)350 × 105 × 240 mm3 (13.78" × 4.13" × 9.45")
Weight3.5 kg (7.72 lbs)

Saturday, September 12, 2015

C1+ HiFi Shield

This module is a special shield for Odroid audio-C1 +. Or in other words C1 + shield HiFi sound card is specifically for Odroid-C1 +.
Features:
- Jack 3.5mm stereo gold-plated (to connect to an external amplifier or other audio devices).
- It's high-end embedded PCM5102 DAC chip that supports 16 audio formats up to 24 bits with minimal distortion (-93dB), and the dynamics of an ideal (100dB +) plus 192 kHz sampling rates.
- Ultra-low dropout regulator noise at-couple with 2 solid capacitors for the power supply, it significantly reduces the noise caused by power supply and decisively improve the SNR (Signal to Noise Ratio).
- By utilizing the I2S interface, it is possible to do direct decoding from digital input to analog output using a master clock synchronization.
- To be able to use the software playback HiFi Volumio, RuneAudio or XBMC.

Wednesday, April 23, 2014

2 X 25Watt Class D Audio Amplifier Board - TDA7492

2 X 25Watt Class D Audio Amplifier Board - TDA7492


This amplifier is a state-of-the-art dual channel Class-D audio amplifier which integrates ST’s TDA7492 as the driver. This amplifier is capable of delivering dual-channel amplification with each channel up to 25W. High quality and high performance components are used making this amplifier high-quality amplifier. Powered by 14V to 19V supply, it can be used in many ampplications like Background Music Systems. It also features thermal protection. In addition, on-board heat sink ensures excellent heat dissipation.

Features:
  • Size: 121.90(L) × 91.00(W) × 21.00(H) ±0.2mm
  • A perfect "Class D" architecture
  • Gain adjustable–four fixed gain settings: 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
  • Line level audio signal input
  • Mounting holes facilitate installation and fixing
  • Several wiring methods facilitate connection
  • Excellent heat sink eliminates your worry on heat dissipation
  • Over temperature protection
  • Click & Pop Noise Reduction

Specifications:
  • Power supply: 14V to 19V
  • Total quiescent current: FAN ON,STBY Disable, Typical 90mA
  • Frequency response: 20Hz to 20KHz(±3dB)
  • 25W output power @THD = 10%, 6 Ω 15V
  • 20W output power @THD = 10%, 8 Ω 15V
  • Operating Temperature: 0℃ to 50℃
  • Storage Temperature: -20℃ to 105℃

Applications:
  • It is the ideal solution for any sound reinforcement installation or application needing an affordable compact PA system.
  • Background Music Systems
  • Vending Machines
  • Lifts
  • Interactive Kiosks
  • Home DIY
  • Car audio

Package Contents: 
2 X 25Watt Class D Audio Amplifier Board - TDA7492 × 1

Note:
The accessories might be a little different from what you've seen on webpage since the accessories you received might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos.

2 X 100Watt Class-D Audio Amplifier Board – TDA7498

2 X 100Watt Class-D Audio Amplifier Board – TDA7498



This amplifier is a state-of-the-art dual channel Class-D audio amplifier which integrates ST's TDA7498 as the driver. This amplifier is capable of delivering dual-channel amplification with each channel up to 100W. High quality and high performance components are used making this amplifier high-quality amplifier. Powered by 14V to 39V supply, it can be used in many ampplications like Active Speaker and Home Systems. It also features short-circuit and thermal protection. In addition, on-board heat sink and cooling fan ensures excellent heat dissipation.

Features:
  • Size: 121.90(L) × 91.00(W)× 53.30 (H) ±0.2mm
  • A perfect "Class D" architecture
  • Fixed gain:37.6 dB
  • Line level audio signal input
  • Externally synchronizable
  • Mounting holes facilitate installation and fixing
  • Several wiring methods facilitate connection
  • Excellent heat sink and powerful cooling fan eliminate your worry on heat dissipation
  • Over/under voltage turn off
  • Over current protection
  • Over temperature protection

Specifications:
  • Power supply: 12V to 39V
  • Crosstalk: 70dB 1 kHz
  • Total quiescent current: typical 40mA
  • Frequency response: 22Hz to 22KHz
  • Total input noise: <50 22="" f="22" hz="" khz="" li="" to="">
  • 100W output power @THD = 10%, 6 Ω 36 V
  • 80W output power @THD = 10%, 8 Ω 34 V
  • Operating Temperature: 0℃ to 50℃
  • Storage Temperature: -20℃ to 85℃

Applications:
  • It is the ideal solution for any sound reinforcement installation or application needing an affordable compact PA system.
  • Background Music Systems
  • Vending machines
  • Lifts
  • Interactive kiosks
  • Home DIY
  • Car audio

Package Contents:
2 X 100Watt Class-D Audio Amplifier Board – TDA7498 × 1

Note:
The accessories might be a little different from what you've seen on webpage since the accessories you received might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos.

Tuesday, October 29, 2013

NAU-ES_MINI_USB

NAU-ES_MINI_USB


USB Dongle for NAU8224-EVB. USB Dongle serves to adjust the volume of NAU8224-EVB from the PC via the USB port

Evaluation Board for NAU8224

NAU8224-EVB is  class-D audio amplifier module which is able to output sound strereo with 3.1W power. This module is based NAU8224 as IC amplifier IC. Volume setting can be controlled directly via the PC (program supplied GUI) through the additional USB Dongle: NAU-ES_MINI_USB

specifications:
- Power supply: 5VDC
- Audio input (digital / analog): Analog
- Input video (digital / analog): Analog
- Audio output (digital / analog): Analog
- Output video (digital / analog): Analog
- Audio Amplifier: Class D (NAU8224)
- Has I2C interface to set the volume

Friday, October 26, 2012

4 Watt 2.4 GHz Indoor 802.11b/g/n WiFi Amplifier (HA2404GTI-NF)



HyperLink GTI series are high power indoor RF amplifiers for 2.4 GHz spread spectrum wireless LANs. High power and excellent linearity make it the highest performance wireless LAN amplifiers available today. These WiFi amplifiers are compatible with 802.11b/g/n wireless LAN equipment. Hyperlink's APC (Active Power Control) circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length. Consisting of a receive amplifier and a transmit power amplifier, the GTI series installs indoors near the radio itself, combining ease of installation with significant improvement in operating range and performance.

The "GTI" series WiFi amplifiers increase range by providing transmit gain as well as 17 dB nominal of receive gain. This receive gain actually increases the receive sensitivity of most wireless LAN radios. This unit can be confiActive Power Control
N-Female Connectors
12VDC Power Supply Included

Note:
This Hyperlink bi-directional amplifier is designed for burst half-duplex operation. It is not intended for constant transmit or CW operation. Operation of the amplifier in CW mode will damage the amplifier and void the warranty. For additional information and complete specifications, click on data sheet link below.

Friday, October 07, 2011

2X8Watt TPA3123 Class-D Audio Amplifier Board

this 2*8W also employs TPA3123D2 chip from TI. The efficiency of the TPA3123D2 eliminates the need for an external heat sink when playing music. It supports dual channel amplification and each such channel is rated at 8W which helps producing state-of-the-art sound quality. Integrating high-quality SMD and MKP plug-in capacitors ensures Hi-Fi amplification output.

You can use it to drive any 4Ω or 8Ω passive speakers. It can readily be powered by any DC power supply ranging from +10 to 16V. With a Car Cigarette Lighter Plug Charger, you can enjoy great music in car without extra power supply.

Features:

Size: 96.48 (L) × 59.20 (W) × 16.10 (H) ±0.2mm
A perfect "Class-D"architecture
Miniature and high-quality
Fully-bridged stereo output
Wide power supply range: +10V-16V
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection
Two kinds of input: line level input and analog audio input
Power the board via the socket (J11)or the wiring terminal (J10)
Excellent design of the power ports which allows users to cascade multiple amplifier boards (max 4 recommended)
Excellent heat dissipation eliminates the requirement of an extra heat sink
Frequency response: 20Hz-20KHz(±3dB)
Signal/Noise ratio: 100dB(A Weighted)
High Output Power
5W @ 8Ω, < 10.0% THD+N
8W @ 4Ω, < 10.0% THD+N

High Efficiency
92% @ 4W 8Ω
85% @ 6W 4Ω

Audiophile Quality Sound
0.1% THD+N @ 3W 8Ω
0.1% THD+N @ 6W 4Ω

Sensitivity and gain adjustable
Over/under voltage turn off
Over current protection
Over temperature protection
Over 90% components are SMT based, which are reliable and environment-friendly
Ideal for DIY and industrial applications

Applications:

Active Subwoofers
Home Theater Receiver
Multi-channel Distribution
Active DVD System
Mini/Micro System

2X25Watt TPA3123 Class-D Audio Amplifier Board

As a new member of class-D amplifier series, this 2*25W amplifier board employs TPA3123D2 chip from TI. It supports dual channel amplification and each such channel is rated at 25W which helps producing state-of-the-art sound quality. The efficiency of the TPA3123D2 eliminates the need for an external heat sink when playing music. Besides, integrating high-quality SMD and MKP plug-in capacitors ensures Hi-Fi amplification output.

This amplifier can readily be powered by any DC power supply ranging from +10 to 30V. You can use it to drive any 4Ω or 8Ω passive speakers.

Features:

Size: 110.02 (L) X 68.60 (W) X 16.00 (H) ±0.2mm
Perfect "Class D" architecture
Half-bridged stereo output or Fully-bridged mono output
Wide power supply range: +10V-30V
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection
Two kinds of input: line level input and analog audio input
Power the board via socketJ11 or the wiring terminal (J10)
Excellent design of the power ports which allows you to cascade multiple amplifier boards (max 4 recommended)
requency response: 20Hz-20KHz(±3dB)
Signal/Noise Ratio: 100dB(A Weighted)
High Output Power
10W @ 8Ω, < 10.0% THD+N
25W @ 4Ω, < 10.0% THD+N

High Efficiency
92% @ 8W 8Ω
85% @ 16W 4Ω

Audiophile Quality Sound
0.08% THD+N @ 5W 8Ω
0.08% THD+N @ 10W 4Ω

Sensitivity and gain adjustable
Over/under voltage turn off
Over current protection
Over temperature protection
Over 90% components are SMT based, which are reliable and environment-friendly
Ideal for DIY and industrial applications
Could be bridged

Applications:
  • Active Subwoofers
  • Home Theater Receiver
  • Multi-channel Distribution
  • Active DVD System
  • Mini/Micro System

2X2Watt PAM8803 Class-D Audio Amplifier with volume control

PAM8803 IC which offers 64-step digital volume control and low THD+N, allowing it to produce high-quality sound reproduction. This board can be powered by 2 to 3 AA batteries or DC2.5V to 4.0V via a terminal block. Audio signal can be input via 2510 connector or 3.5mm headphone jack. In addition, this board still remains the features of AA-AB32131, such as over/under voltage turn off, over current protection, etc., and can be used to drive passive 4Ω or 8Ω speakers.  Volume control is available via on-board buttons or an external rotary encoder daughter board.

Features:

Size: 74.40 (L) × 54.80 (W) × 18.00 (H) ±0.2mm
A perfect "Class D" architecture
Miniature and high quality
Full-bridged stereo output
64-step gain adjustment
Frequency response: 20Hz to20KHz(±3dB)
Signal/Noise Ratio: 85dB (f=22Hz to 22KHz, THD=1%)
High Output Power
1.2W @ 8Ω, < 10.0% THD+N
2.0W @ 4Ω, < 10.0% THD+N

High Efficiency
85% @ 1.2W 8Ω
88% @ 2.0W 4Ω

Audiophile Quality Sound
0.19% THD+N @ 0.5W 8Ω
0.17% THD+N @ 1.0W 4Ω

Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection
Excellent heat dissipation eliminates the requirement of an extra heat sink
Over/under voltage turn off
Over current protection
Over temperature protection
Over 90% components are SMT based, which are reliable and environment-friendly
Ideal for DIY and industrial applications

Applications:
  • Home Active Speaker
  • Home Theater Receiver
  • Multi-channel Distribution
  • Active DVD System
  • Mini/micro Systems

2X15Watt TA2024 Class-D Digital Audio Amplifier

Class-D audio amplifier based on authentic TA2024 from Tripath
Streamlined aluminium alloy housing helps remove heat and makes it more durable
Wide power supply range: 9-14V power source. With a Car Cigarette Lighter Plug Charger, you can enjoy great music in car without extra power supply.
High-quality digital volume control IC ensures long time use and perfect sound output

High input sensitivity
0.1% THD+N @ 9W, 4Ω
0.1% THD+N @ 6W,8Ω
15W @ 4Ω, 10% THD+N
10W @ 8Ω, 10% THD+N
84% @ 15W, 4Ω
90% @ 10W, 8Ω
MCU-based backlight of volume control knob-"LED ring", which is illuminated when you turn the power on.
Over/under-voltage shut down
Over-current protection
Over temperature protection
Size: 120 (L) X 74.6 (W) X 49 (H)±0.2mm
aluminium alloy case is the definition of Elegance, hard and frosting
Over 90% components are SMT based, which are reliable and environment-friendly

Applications:
Home Theater
Powered Subwoofers
Powered DVD Systems
Mini/Micro Systems
MP3, Video CD output Amplification

2X100 Watt Class-D Audio Amplifier Board

Powered by any DC voltage from 10V to 32V, this high efficiency amplifier board is capable of outputting up to 100W per channel. Volume control can also be done via on-board DIP switches. Besides, this board can be used to drive 4Ω or 8Ω passive speakers.In addition, auto fan control function is utilized so that the cooling fun will self-adjust its rotating speed when the temperature of chips is too high, ensuring the normal working of the chips, and will automatically shutdown when the temperature of chips keeps low, ensuring the fun’s own long service life.

Features:

Size: 148.30 (L) × 106.80 (W) × 35.50 (H) ±0.2mm
A perfect "Class T" architecture
Wide power supply range: 12V to 30V, maximum 32V
Frequency response: 20Hz to 20KHz(±3dB)
Signal/Noise Ratio: 100dB(A-Weighted)

High Output Power
30W @ 6Ω, < 1% THD+N
40W @ 8Ω, < 3% THD+N
100W @ 4Ω, < 10.0% THD+N

High Efficiency
86% @ 60W 8Ω
82% @ 46W 6Ω
90% @ 100W 4Ω

Audiophile Quality Sound
0.007% THD+N @ 30W 8Ω
0.005% THD+N @ 70W 4Ω

Line level audio signal input
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection
New design in power supply supports connection with more amplifier boards of the same type
Excellent heat sink and powerful cooling fan on TP2050 eliminate your worry on heat dissipation
Over/under voltage turn off
Over current protection
Over temperature protection
Over 90% components are SMT based, which are reliable and environment-friendly
Ideal for DIY and industrial applications

4X100Watt TK2050 D-class Amplifier

Based on two TC2000 and four TP2050 chips from Tripath, this class-D audio amplifier board allows the creation of really good sounding multi-channel systems. Being compatible with power supplies ranging from 10V-30V, it can be used in many audio systems. This amplifier has four channels, all with the same power up to 100W each and sound quality, so the sound quality is simply outstanding. You can use any number of channels you like, and leave the others unused.

This is an exceptionally well designed amplifier, with a lot of power reserve, high fidelity, low distortion, good S/N ratio, high sensitivity, low consumption and full protection. Having all these almost ideal characteristics this amplifier is likely to become the basic building block of your future high fidelity system, or it can also become the element that will upgrade your existing system.

Features:
  • Several wiring methods facilitate connection.
  • Mounting holes are available for easy installation and fix.
  • Excellent heat sink eliminates your worry over heat dissipation.
  • "Audiophile quality" sound
  • A perfect "Class D" architecture
  • Operating voltage range: 10V-30V, the maximum voltage of power supply is 32V
  • Frequency response: 20Hz-20KHz (±3dB)
  • Signal/Noise Ratio:100dB
  • High Output Power
  • 30W @ 6Ω, < 1% THD+N
  • 40W @ 8Ω, < 3% THD+N
  • 100W @ 4Ω, < 10.0% THD+N
  • High Efficiency
  • 86% @ 60W 8Ω
  • 82% @ 46W 6Ω
  • 90% @ 100W 4Ω
  • Audiophile Quality Sound
  • 0.007% THD+N @ 30W 8Ω
  • 0.005% THD+N @ 70W 4Ω
  • Line level analogue audio input
  • Over/under voltage turn off
  • Over current protection
  • Over temperature protection


Applications:
  • Active Subwoofers
  • Home Theater Receiver
  • Multi-channel Distribution
  • Active DVD System
  • Mini/Micro System

Wednesday, September 29, 2010

TDA2050 32W Hi-Fi AUDIO POWER AMPLIFIER

TDA2050 32W Hi-Fi AUDIO POWER AMPLIFIER 
Features:
  • HIGH OUTPUT POWER    (50W MUSIC POWER IEC 268.3 RULES) 
  • HIGH OPERATING SUPPLY VOLTAGE (50V) 
  • SINGLE OR SPLIT SUPPLY OPERATIONS 
  • VERY LOW DISTORTION 
  • SHORT CIRCUIT   PROTECTION       (OUT   TO   GND) 
  • THERMAL SHUTDOWN
The TDA 2050 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB audio amplifier. Thanks to its high power capability the  TDA2050 is  able to  provide up  to 35W true rms power into 4  ohm load @ THD = 10%, VS   = ±18V, f  = 1KHz and  up  to  32W into      The high power and very low harmonic and cross- 8ohm load @ THD = 10%, VS  = ±22V, f = 1KHz.           over distortion (THD = 0.05% typ, @ VS  = ±22V,  P  = 0.1 to 15W, R  =8ohm, f = 100Hz to 15KHz) Moreover,  the  TDA  2050  delivers typically 50W  make the device most suitable for both HiFi   and music power into  4 ohm load over 1 sec at  VS= 22.5V, f = 1KHz.