Tuesday, March 07, 2017

IRLML6402TRPBF Mosfet

IRLML6402TRPBF a P-Channel MOSFET with a fairly fast switching capability and low resistance. This MOSFET is designed such that power consumption can be done efficiently

Siglent SDG1025 25MHz Arbitrary Waveform Generator

The SDG1025 Function/Arbitrary Waveform Generator represents a new level of price performance  value from SIGLENT.  The ergonomic design features a 3.5 inch TFT-LCD display;  Online help feature; Support for USB and internal storage to accomodate file management; . The SIGLENT SDG1025 implements a  DDS  ( Direct Digital Synthesizer) design which provides several technical advantages over older analog Function/Waveform generators including enhanced frequency agility, better phase noise and more precision to control the output phase across frequency switching transitions. 

Arbitrary Waveform Generation Capabilities:

The SIGLENT SDG1025 generates 14-bit 16kpts arbitrary waveforms, Arbitrary editing software (EasyWave) provides 9 standard waveforms: Square, Sine, Pulse, Ramp, Exponential Fall, Exponential lRise, Sinc, Noise and DC, which meets’ basic needs of all engineers; It is easy to develop your  own waveforms using EasyWave drawing software with your computer mouse.  Supports point-to-point line segment drawing and arbitrary point drawing.making it easy to create complex waveforms. Multi-file screen management helps the engineer  edit multiple-waveforms at the same time. It provides ten (10) Storage locations in non-volatile RAM. You can edit and store more waveforms on your PC by using the EasyWave sofware.

Main Features:

DDS technology, dual-channel output. Outputs are totally independent with adjustable phase shift.
125MSa/s sample rate, 14bit vertical resolution.
5 types of standard output waveforms, built-in 48 arbitrary waveforms.
Complete set of modulation functions: AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, burst.
Abundant input/output: waveform output, ‹ Synchronous signal output, External modulation source input, 10MHz clock input, external trigger input, internal trigger output etc. 
Channel coupling and duplication function 
Built-in accurate freq. counter allows the user to measure frequencies up to 200MHz (single channel) 
Standard interfaces: USB Device, USB Host, 
High precision clock
Supplied with powerful arbitrary editing software (EasyWave)
Supports Remote control
Arbitrary waveform output:

Built-in 48 arbitrary waveforms, including math, engineering and other commonly-used waveforms.

Complete set of modulation functions, sweep output, burst output.

Complete set of modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, the modulation waveform can be observed directly, which it is desirable for education and training sessions;
Sweep output: varies output frequency from start frequency to stop.  Sweep time range: 1ms~500s. The carrier can be Sine, Square, Triangle and Arbitrary waveforms. 
Burst output: It can periodically generate pulse sequences. Internal counter and external control signal are available to control burst output.
Dual-channel Synchronization:

Duplicating function 

Channel coupling: after setting the primary channel and coupling frequency/phase differences, the frequency/phase of the second channel will change in relation to the primary channel, maintaining the frequency /phase difference .
Channel duplicating: allows user to duplicate parameters from one channel to the other.
Built-in frequency counter:

Wide frequency range: 0.1Hz~200MHz. Measurable parameters: frequency, period, duty-cycle, positive pulse width, negative pulse width Ssetting: Adjustable parameters include DC/AC coupling, trigger level and high frequency rejection.

Specifications:

Maximum output frequency: 25MHz 
Output channels: 2 
Sample rate: 125MSa/s 
Arbitrary waveform length: 16kpts 
Frequency resolution: 1μHz 
Vertical resolution: 14bits 
Waveforms: Sine, Square, Ramp, Pulse, Gaussian Noise. 48built-in arbitrary waveforms(include DC)
Modulation: AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst
Frequency counter Range: 100mHz~200MHz
Standard interface: USB Host & Device
Dimension: Width x Height x Depth=229mm x 105mm x 281mm
Frequency Specifications:

Waveforms: Sine, Square, Ramp, Pulse, Noise, Arbitrary 
Sine: 1μHz ~ 25MHz
Square: 1μHz ~ 25MHz
Pulse : 500μHz ~ 5MHz
Ramp/Triangular: 1μHz ~ 300kHz
Gaussian white noise: 25MHz (-3dB)
Arbitrary: 1μHz ~ 5MHz 
Resolution: 1μHz 
Accuracy: Within 90daysv±50ppm within 1 year ±100ppm 18°C~28°C 
Temperature coefficient: <5ppm p="">
Sine Spectrum Purity:

DC~1MHz -60dBc 
1MHz~5MHz -53dBc 
5MHz~25MHz -35dBc 
Total harmonic waveform distortion ( Channel 1 & Channel 2)  DC~20kHz,1Vpp<0 .2="" nbsp="" p="">
Spurious signal(non-harmonic) 
DC~1MHz<-70dbc nbsp="" p="">
1MHz~10MHz<-70dbc db="" p="" phase="" spectrum="">
Phase noise 10kHz Offset,–108dBc/Hz(typical value)
Square:

Rise/fall time <12ns 90="" nbsp="" p="">
Overshoot <5 khz="" nbsp="" p="" pp="" typical="">
Duty Cycle
1μHz ~10MHz 20%~80% 
10MHz(exclude)~20MHz 40%~60% 
20MHz(exclude))~25MHz 50% 
Asymmetric(50% Duty Cycle) 1% of period+20ns(typical,1kHz,1Vpp) 
Jitter 0.1% of period(typical,1kHz,1Vpp)
Ramp/Triangle:

Linearity <0 .1="" khz="" nbsp="" of="" output="" p="" peak="" pp="" symmetric="" typical="" value="">
Symmetry 0%~100%
Pulse:

Pulse width 1800s, Max. 16 ns, Min. 8 ns resolution 
Rise/Fall time (10% ~ 90%,typical,1 kHz,1Vpp) 7ns 
Duty Cycle 0.1%Resolution 
Overshoot <5 nbsp="" p="">
Jitter(pk-pk) 8ns
Arbitrary:

Waveform length 16k points 
Vertical resolution 14bits 
Sample rate 125MSa/s 
Min. Rise/Fall time 7ns(typical) 
Jitter(pk-pk) 8ns(typical) 
Storage in non-volatile RAM memory (10 in total): 10 waveforms
Output Specifications:

Output Amplitude
CH1:
2mVpp~10Vpp(50Ω,≤10MHz)
2mVpp~5Vpp(50Ω,>10MHz)
4mVpp~20Vpp(high
impedance,≤10MHz)
4mVpp~10Vpp(high
impedance,>10MHz)
CH2
2mVpp~3Vpp(50Ω)
4mVpp~6Vpp(high impedance)
Vertical accuracy (100 kHz sine)
CH1 ±(0.3dB+1mVpp of setting value)
CH2 ±(0.3dB+1mVpp of setting value)
Amplitude flatness (compared to 100 kHz sine,5Vpp) ±0.3 dB
Channel phase deviation <400ps classic="" nbsp="" p="" sine="" value="" vpp="" z="">
Cross talk <-70dbc nbsp="" p="">
DC Offset:

Range(DC) 
CH1 ±5V(50Ω) ±10V(high impedance) 
CH2 ±1.5V(50Ω) ±3V(high impedance)
Offset accuracy
CH1 ±(|setting offset value|*1%+3mV) 
CH2 ±(|setting offset value|*1%+3mV
Waveform Output:

Impedance: 50Ω(typical)
Protection: short-circuit protection
AM Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary (2mHz ~ 20kHz) 
Modulation depth 0% ~ 120% 
FM Modulation(CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary(2mHz~20kHz) 
Frequency deviation 0 ~0.5*bandwidth 10μHz resolution 
PM Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Noise, Arbitrary(2mHz~20kHz) 
Phase Deviation 0~360° ,0.1°Resolution 
FSK Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform 50% duty-cycle square waveform(2mHz~50kHz)
ASK Modulation (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Source Internal/External 
Modulation waveform 50%duty-cycle square waveform(2mHz~50kHz)
PWM Modulation (CH1/CH2):
Frequency 500μHz~20kHz 
Source Internal/External 
Modulation waveform Sine, Square, Ramp, Arbitrary(except DC) 
External Modulation range -6V~+6V (maximum width deviation) 
Sweep (CH1/CH2):

Carrier Sine, Square, Ramp, Arbitrary(except DC) 
Type: linear/logarithmic
Direct: Up/down
Sweep time 1ms~500s 
Trigger source: Manual, external, internal
Burst (CH1/CH2):

Waveform Sine, Square, Ramp, Pulse, Arbitrary(except DC) 
Type: Count(1~50,000 periods),infinite, Gated
Start/Stop phrase 0°~+360°
Internal period 1μs~500s
Gated source: External trigger
Trigger source: Manual, External or Internal
Rear Panel Connector:

External modulation: ±6V=100% modulation>5kΩ input impedance 
External trigger: TTL compatible 
Note: The external input voltage can’t be over ±6V, otherwise instrument gets damaged.
Trigger Input:

Input Level: TTL compatible 
Slope: Rising Edge/Falling Edge
Pulse width >100ns 
Input impedance >5kΩ,DC coupling 
Trigger Output:

Voltage level TTL compatible 
Pulse width >400ns
Output impedance 50Ω (typical)
Max. frequency 1MHz 
SYNC Output:

Voltage level: TTL compatible
Pulse width >50ns 
Output impedance 50Ω(typical)
Max. frequency 2MHz
Frequency Counter:

Measurement: Frequency, Period, Positive/negative pulse width, duty cycle
Frequency range: Single Channel:100mHz~200MHz
Frequency resolution: 6bits/s 
Manual DC Coupling:

DC offset range ±1.5VDC
100mHz~100MHz: 50mVrms~±2.5V
100MHz~200MHz 100mVrms~±2.5V
Manual AC coupling:

1Hz~100MHz 50mVrms~5Vpp 
100MHz~200MHz 100mVrms~5Vpp 
Pulse width and duty-cycle measurement:

1Hz~10MHz(50mVrms~5Vpp) 
Input adjustment:

Input impedance 1M ohm
Coupling mode AC,DC 
High-frequency rejection ON/OFF 
Trigger level range:

-3V~ +1.8V
General Specification:

Display 
Display type 3.5inch TFT-LCD 
Resolution 320×RGB×240 
Color depth 24bit 
Contrast Ratio 350:1(typical) 
Luminance 300cd/m2(typical)
Power
Voltage
100~240 VACRMS, 45~66Hz,CATII  
Consumption <30w p="">
Fuse 1.25A,250V
Environment 
Temperature
Operation:0°C~40°C
Storage:-20°C~60°C 
Humidity range 
Below +35°:≤90% relative humidity
+35?~+40°:≤60% relative humidity 
Altitude 
Operation: below 3,000 meters 
Storage: below 15,000 meters
Dimension
Width: 9 1/64th" (229mm)
Height: 4 9/64th" (105mm) 
Depth: 11 1/16th" (281mm)
Weight
N.W: 2.6Kg

Siglent SDS1052DL 50MHz Digital Storage Oscilloscope with Frequency Counter, 7'' TFT-LCD Display

The Siglent SDS1052DL is a 50MHz, two-channel, digital storage oscilloscope with a hardware frequency counter, a 500MS/s per channel sample rate, a 32kpts per channel record length, and advanced triggers for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. It has Edge, Pulse, Video, Slope, and Alternative triggers and its math functions include FFT (fast fourier transform). Additional specifications include a rise time of 7.0ns and vertical sensitivity to 2mV per division for capturing low-level signals. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The oscilloscope has RS232 and USB ports for communication, and a 7" color TFT-LCD (480 x 234 pixels) with an internal 8 x 18 division grid for viewing waveforms.



Features:
  • 50MHz, two-channel digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education
  • Maximum real-time sample rate of 500MS/s per channel and record length of 32kpts per channel for acquiring detailed waveforms
  • Advanced triggers for isolation of specific signals
  • Built-in frequency counter measures real-time frequency from 10Hz to 50MHz
  • 7" color TFT-LCD with an internal 8 x 18 division grid for viewing waveforms


Specifications
  • Bandwidth 50MHz
  • Channels Two
  • Display 7" color TFT-LCD
  • Power 100 to 240V, 50W
  • Weight 2.5kg
  • Dimensions (H x W x D) 157 x 323 x 136 mm



Monday, March 06, 2017

Rubber traction band

Rubber band for plastic wheel traction (PWGT / PWST), 2 pcs / pack.

1 package contains 2 rubber band

GM11 Mini Metal Gear DC Motor 75.7:1

DC motors are equipped with metal gearbox and has a small physical shape

Specification:
- Power Supply: 5VDC / 650mA
- No-load speed: 246 rpm
- Torque: 200gf-cm
- Configuring the output shaft: horizontal
- Direction of motor rotation: CW and CCW

Sunday, March 05, 2017

8KD-5 Thermistor 8K Ohm

8KD-5 Thermistor 8K Ohm's Figaro Gas Sensor

specifications:
- Rated zero-power resistance 8kΩ
- Dissipation factor: 3,5mW / ºC
- Thermal time constant 13s
- Rated power 297mW @ 25ºC

5KD-5 Thermistor 5K Ohm

5KD-5 5K Ohm Thermistor for Figaro Gas Sensor

specifications:
- Rated zero-power resistance 5kΩ
- Dissipation factor: 3,5mW / ºC
- Thermal time constant 13s
- Rated power 297mW @ 25ºC

Pushbutton Switch DDS-0432 Green Push On

Green Pushbutton type push on 

Pushbutton Switch DDS-0432 Yellow Push On

Yellow pushbutton type Push On 

Pushbutton Switch DDS-0432 Red Push On

Pushbutton red round shape with  Push ON configuration.