Friday, January 13, 2017

2xAA Battery Holder with switch

A socket to put the 2 AA batteries simultaneously, either AA batteries or rechargeable AA batteries unrechargeable. On battery socket has also been equipped with On / Off switch that will allow you to disconnect and reconnect power.

Specification:
- Material: Plastic
- Color: White transparent
- Dimensions: 69 x 34 x 21 mm
- Compatibility: AA Battery

Wednesday, January 11, 2017

MIC5219-5V voltage regulator

MIC5219-5V is a linear voltage regulator capable of high peak drain current with a low dropout voltage. MIC5219-5V able to regulate the maximum voltage of 12 VDC into a fixed voltage 5 VDC at 500 mA output current. MIC5219-5V is perfect when applied as a regulator tegangann on laptops, notebooks, mobile phones, and so forth.


TUSB3410VF chip

TUSB3410VF an IC that serves to bridge two different interfaces, namely USB and UART. TUSB3410VF has been integrated with a microcontroller 8052 which the microcontroller has 16 KB of RAM, 10 KB ROM, as well as an I2C bootloader. TUSB3410VF is commonly used in modems, printers, medical devices, DSP, and so forth.

Specification:
- MCU: 8052
- ROM: 10 KB
- RAM: 16 KB
- Series controllers: TUSB
- Interface: I²C, USB and UART
- Number of I / O: 4 I / O
- Working Voltage: 3 - 3.6 V
- Working Temperature: 0 ° C - 70 ° C
- Mounting Type: SMD / SMT
- Packaging: 32-LQFP

PDIUSBD12PWTM chip

PDIUSBD12PWTM a USB peripheral controller is equipped with high-speed parallel interface to access the USB preriferal. PDIUSBD12PWTM has full compatibility with USB 2.0 protocol-speed 12 Mbps and is ideal if integrated in peripherals printers, scanners, external storage media, digital cameras and so forth.

Specification:
- Number of Transceiver: 1
- Speed: 12 Mbps
- Protocol: USB 2.0
- Type Power Supply: Dual
- Working Voltage: 3.3 - 5.5 V
- Interface: Parallel
- Dimensions: 9.8 x 4.5 x 0.95 mm
- Working temperature: -40 ° C - 85 ° C
- Packaging: TSSOP-28
- Features: Equipped with ESD protection and 320-bit FIFO memory that has been integrated into


Speaker w/ mounting bracket & screws 3.5mm jack

A speaker kit that includes completed connector 3.5 mm audio jack as an audio signal input lines and mounting bracket which serves to facilitate you in installing these speakers to the wall, wooden planks, iron plate, and so forth. Because of their small size and relatively light weight then the speaker kit is easy to carry anywhere and are well suited for portable applications.

Specification:
- Connector Type: Audio jack 3.5 mm
- Weight: 210.8 g
- Black
- Features: Equipped with mounting bracket

78604 / 1C Pulse transformer

78 604 / 1C is a pulse transformer with a minimum inductance 2000 microHenry and has been commonly used in applications clutch lines and isolated power suppy.

Specification:
- Primary Inductance: 2,000 UH
- Constant Primer: 20 vus
- Leakage Inductance: 0.99 UH
- Inter-winding capacitance: 29 pF
- Resistance: 600 Mohm
- Isolation Voltage: 1000 Vrms
- Dimensions: 9:52 x 9:52 x 6:35 mm

NTC 10K Ohm

NTC Thermistors for Temperature Measurement
Specification:
- Max Power: 200mW
- Resistance: 10K Ohm, a tolerance of 10%
- Rated temperature: 25 ° C

Tuesday, January 10, 2017

VK-62 Hand Held Plastic Electronic Enclosure

case of hand-held dimension of 145.80 x 46.23 x 33.27 mm, which protects the electronic circuitry from damage due to impact and extreme temperatures. Case is made of black ABS plastic with certification of fire resistance UL94V-0. In addition, this case has also been equipped with a socket to put AA batteries, so it is easier for you to apply to portable electronic devices.

Specification:
- Dimensions: 145.80 x 46.23 x 33.27 mm
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Black
- Fire resistance: UL94V-0
- Features: Comes socket to put AA batteries

DIP Pushbutton Switch Big /w 2 LED

DIP pushbutton switch with 2 LED is a pushbutton switch SPDT (big knob), two 3mm LEDs (red and green).

Mini Drill Kitani

Mini Drill Kitani

specifications:
- 12VDC power supply - 18VDC
- Diameter of drill bits: 0.8mm - 1.2mm