0.95inch RGB OLED Module 96x64 (B)

Waveshare 0.95inch RGB OLED (B) OLED Module Kit with SSD1331 Driver Chip 96 x 64 Resolution SPI I2C with Vertical Pinheader

• Model Number:0.95inch RGB OLED (B)
• Model Name:0.95inch RGB OLED (B)
• Driver Chip:SSD1331
• Interface:SPI
• Resolution:96*64
• Display Size:0.95inch
• Colors:65K colorful
• Visible Angle:>160°
• Operating Temp. (℃):-20~70
• Operating Voltage:3.3V / 5V

0.3 Mpx OV7670 Camera Board

The OV7670 Camera Board is a simple digital camera based on OV7670, it uses dark PCB to prevent light leak.

The OV7670 Camera Board makes it possible to take photos and/or record video with your development board.

Features

• OV7670, camera, control interface
• Can be used in Arduino, Maple, ChipKit, STM32, ARM, DSP, FPGA platforms
• Support for output formats:RAW RGB,RGB565/555/444,CCIR656,YUV422/420,YCbCr422,and compression
• Low operating voltage for embedded portable apps
• Standard SCCB interface compatible with I2C interface
• Supports image sizes: VGA, CIF, and any size scaling down from CIF to 40x30

Dekko DP 311P long nose plier

Sometimes called the of this shark plier is equipment with a high degree of precision. It also uses high-quality materials and light weight.

Dekko DN 52 cutting plier tool

The Cutting Plier is equipment with a high degree of precision. It also uses high-quality materials and light.

DEKKO HS-2203 Three Phase Digital Power Clamp Meter

DEKKO HS-2203 Three Phase Digital Power Clamp Meter

Features :

• Auto Power Off
• Auto Ranging
• Max/min
• Data Hold
• Display Back Light
• Jaw Opening Ø50 mm / 2.0”
• Data Logging and Recall 28 Groups
• LBD Low Battery Indication
• True RMS True Root Mean Square Measurement
• Display 9999 Counts
• RS232 Interface

Specifications

HS 2203	RANGE	ACCURACY
AC Voltage	0.1 ~ 600V	±(1.2%+5)
AC Current	0.1A ~ 1000A	±(2.0%+5)
Active Power	0.1kW ~ 600kW	±(3.0%+5)
Apparent Power	0.1kVA ~ 600kVA	±(3.0%+5)
Reactive Power	0.1kVAr ~ 600kVAr	±(4.0%+5)
Power Factor	0.3 ~ 1	±(0.02%+2)
Active Energy	0.001kWh ~ 10000kWh	±(3.0%+2)
Frequency	20Hz ~ 1000Hz	±0.5%
General
Power Supply	4 x 1.5V AA Batteries
Product Size	300mm x 103mm x 51mm (11.8” x 4.1” x 2.0”)
Product Weight	640g (1.4lb)
Category	CE CAT. III 600V RoHS

Single Port PoE Injector - 30Watt

This high power PoE injector supports Midspan MODE-B PoE power protocol, and has 30W output.It supports up to 10/100Mbps communicating speed, and 100VAC~240VAC wide range input voltage makes it work stably with different voltage standards.

With PoE output, you will no longer need any external power. This PoE injector meets your every project requirement such as router, wireles AP and other devices that use standard PoE protocol. 

SPECIFICATION

• Model: PSE801
• Output power: 30W
• Input power: 100~240VAC 50~60Hz 
• Dimension: 142mm*60mm*40mm (5.59"*2.36"*1.57")
• Cable range: <=100m (3937")
• Weight: 170g

SHIPPING LIST

• PoE Injector - single port 30W   x1
• Power calbe   x1

4.3inch e-Paper

This is a serial interface E-Ink display module, 4.3inch, 800×600 resolution, with embedded font libraries, ultra low power consumption.

You don't have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.

Features

• Easy to use, displays any contents via one serial interface, including geometric graphics, texts, and images
• Embedded font libraries, supports 32, 48 and 64 dot matrix GBK Chinese fonts and English fonts
• Built-in 128MB NandFlash, allows the font/image data to be stored in either an external TF card or the internal NandFlash
• 4 grey level displaying, 800×600 resolution
• Adjustable serial interface baud rate, 115200 by default when power up
• Powered from 3.3V to 5V, compatible with logic level
• Ultra low power consumption, sleeping current lower than 5mA
• Comes with host computer software, control it directly on your computer

Applications

• e book
• Shopping mall POS
• Price label
• Industry instrument

Pin Definitions

• VCC : 3.3V~5.5V
• GND : GND
• DOUT : Serial data out
• DIN : Serial data in
• WAKE_UP : External wake up
• RST : External reset

Currency Display Controller

A controller which is used to display a variety of currency exchange rates. Very suitable for use in the banks or the kind of work that requires a lot of information exchange in real-time such as foreign exchange and the like.

Features:

- Displays the currency exchange rate to the monitor / TV in portrait (1024 x 1280) using the HDMI connection (for others to use the interface converter).

- Display consists of 8 columns consisting of one currency logo column, one column name of the currency and 6 columns currency values.

- Display the company logo, background and text move to set design.

- Having a website to display configurations. Configuration can be done through a computer connected to the network via Google Chrome or Mozilla Firefox.

- To connect using a LAN / Ethernet.

- There are three buttons on the controller: the shutdown button to shut down the system, the IP reset button to change the IP reset to its original settings and buttons Run / Restart to restart the system.

Equipment:

- Controller.

- Bracket.

- Adaptor 5V / 2A for the controller.

Note: Not including LCD TV / monitor.

Accessories Pack (Type D) for BeagleBone Black

BeagleBone Black is an MSRP community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.

Package accessories for Beaglebone Black (BB Black) type D.

As in this package are:

• 1x LCD Cape which is pengubung between BB Black with LCD touch screen 7 ".
• 1x LCD Touch 7 "with a resolution of 800 x 480.
• Cable 1x USB to TTL 4-pin.
• 1x Adaptor 5V, 2A US Standard.
• 1x USB cable A - mini B.

Note: In this package does not include Beaglebone Black.

HEXBUG Aquabot 2.0 Hammerhead Shark

A hammerhead shark-shaped robot. In Aquabot 2.0 is equipped with smart technology-fish, additional sensor (automatic on-off), electro-magnetic propulsion and can fluoresce (glow) in water.

With the addition of this technology to make robotic hammerhead shark is able to explore their environment, swimming, diving and changed direction. After 5 minutes, it will automatically go into "sleep" mode. To reactivate, simply tapped on the glass tank / aquarium.