Thursday, April 14, 2016

Mean Well SD-350B-24 DC to DC Converter

Mean Well SD-350B-24 specifications: DC-DC Enclosed converter; Input 19-36Vdc; Output +24Vdc at 14,6A; Forced air cooling.

Specifications

Max. output350 W
Output typeSingle
Output description24V,0-14.6A
 
Power supply typeDC/DC converter
Enclosure typeEnclosed Type
 
RoHSCompliant
Suitable for medicalNo
DimmableNo

Input

Input rangePhase(s)
19 - 36 VAC1
 

Output

VoltageCurrent
24 V0 - 15 A



Tuesday, April 12, 2016

DEKKO ML825L Magnifying LED Lamp

DEKKO ML825L Magnifying LED Lamp

features:
1. Provide bright light airy with a very bright LED LIGHT center under a magnifying glass.
2. Magnification: 3x Diopter (1.75)
3. The LED light head magnifying a diameter of 9 inches (23 cm) were dealing with a magnification lens.
4. It is 5 inches in diameter (12, 7 cm)
5. Power supply: 220 VAC, 50 Hz.
dekko ML825 tube lamp and  LED series

DEKKO ML825 Magnifying Lamp

DEKKO ML825 Magnifying Lamp


features:
1. Provide bright light cool under a magnifying glass center.
2. 22 Watt T5 fluorescent bulb ring
3. Magnification: 5x Diopters  (2.25)
4. Lamp magnifying head diameter 9 inches (23 cm) were dealing with a magnification lens.
5. It is 5 inches in diameter (12, 7 cm)
6. Power supply: 220 VAC, 50 Hz.

100MHz analog Oscilloscope VOS-6100

100MHz analog Oscilloscope VOS-6100

Features : 
❑ 100MHz Bandwidth. Dual Channel. Delayed Sweep
❑ Built-In 6 Digit Universal Counter
❑ 10 Sets Memory for Front Panel Setting Save Recall
❑ Time Base Auto-range
❑ Cursor Readout with 7 Measurements
❑ Panel Setup Lock of Digital-Control Functions
❑ Buzzer Alarm
❑ LED Indicators
❑ TV Synchronization
❑ Trigger Signal Output
❑ Z-Axis Modulation Input
❑ SMD Technology, High Stability and Reliability

❑ Cursor measurement system
Cursor measurement function : A T, 1/ A T, A V ; P ( t,v )
Cursor Readout Function
Cursor resolution : 1 / 25 DIV
Effective cursor Rang Vertical :* 3div : Horizontal : * 4div
Panel setting : Vertical : V/DIV, AC/DC/GND, CH1, CH2, INV,ALT,
CHOP, ADD : Horizontal : TIME/DIV, x 1/x 10 ),>:-Y

❑ Horizontal System
Horizontal Modes : MAN ( A ), ALT, DELAY ( B )
A ( main 1 Sweep Time : 50nS 0.55/DIV, continrously variable ( UNCAL )
B ( delay ) Sweep Tine : 50nS 50mS/DIV
Accuracy : ±3 % (f 5% at x 10MAG )
Sweep Magnification : x10 ( maximum sweep time 5nS/DIV )
Hold OFF time : Variable
Delay Time 1 uS - 5S
Delay Jitter : 1/20000 or less
Alternatr Separation : Variable

❑ X-Y MODE
Sensitivity : X-axis. Y-axis selectable
X-axis : CH1, CH2 -4 2mV 5V/DIV ± 3%
Y-axis:CH1. CH2 - 2mV 5V/DIV ± 3%
EXT a 0.1V/DIV ± 5%
X-axis Bandwidth : DC - 500KHz ( -3dB )
Phase Error : 3' or less at DC - 50KHz

❑ CURSOR READOUT FUNCTION
Cursor measurement function : A V, A V%, A VdB, A T, 1/ A T. A T%,
Cursor Resolution : 1 /100 DIV
Effective Cursor Range : Vertical : ± 3DIV, horizontal : ±4 DIV
Panel setting : Vertical : V/DIV ( CH1. CH2) . UNCAL. ADD. P10. AC/DC/GND
Horizontal : S/DIV ( MTB. DTB ). UNCALx Delay time Hold-off
Trigger : Source. Coupling. Slope, Level. 1-4
Others : X-Y, LOCK. SAVE / RECALL. MEM 0-9

❑ CRT
Type : 6-inch rectangular type with internal graticule 0%. 10%. 90% and 100%
markers. 8x 10DIV (1 DIV = 1 cm )
Phosphor : P31
Accelerating Potential : 16KV approx
Illumination :Continuous adjustable

❑ VERTICAL DEFLECTION SYSTEM
Sensitivity : 2mV 5V/DIV, 11 step in 1-2-5 sequence
Sensitivity Accuracy : 3% ( 5DIV : at the center display )
Vernier Vertical Sensitivity : Continuously variable to 1 / 2.5 or less than panel-indicated value
Frequency Bandwidth ( -3dE ) : DC - 100MHz ( 2mV/DIV : DC - 20MHz )
Rise Time : 3.5ns ( 2mV/DIV : 17.5ns )
Signal Delay : Leading edge can be monitored
Maximum Input Voltage : 400V ( DC + AC) at 1 KHz or less
Input Impedance mo. ± 2% // 25pF approx
Vertical Modes : CH1, CH2. DUAL ( CHOP /ALT ), ADD ( DIFF mode can be established when the CH2 is in the INV mode )
CHOP Repetition Frequency : Approx. 250KHz
Polarity ( INV) : CH2 only
Bandwidth Limited : 20MHz
Common-mode Rejection Ration : 50:1 or better at 50 KHz

❑TRIGGER SYSTEM
Trigger Modes AUTO, NORM, TV
Trigger Source : CH1, CH2. LINE. EXT
Trigger Coupling : AC, DC. HER, LFR
Trigger Slope : + / - polarity or TV sync polarity
Trigger Sensitivity : AUTO : 10Hz 20MHz. 0.35DIV 50mVpp ( 20MHz - 100MHz ) 1.5DIV. 150mVpp
NORM : DC 20MHz. 0 35DIV. 501-riVpp ( 20MHz-100MHz ) 1.51)IV. 150mVpp
TV : Sync signal , 1 DIV . 200mVpp
Trigger Level Range : INT : ±4DIV or more EXT :± 0.4V or more
TV Sync : TV-V. TV-H
Max. External Input Voltage : 400V ( DC + AC peak ) at 1 kHz
External lnput Impedance : 1 MO ± 5% // 25pF approx

❑ Z - AXIS INPUT
External intensity modulation
Coupling : DC
Voltage : 5V or more
Maximum Input Voltage : 30V ( DC + AC peak ) at 1 kHz or less
Bandwidth : DC - 5MHz

❑ TRIGGER SIGNAL OUTPUT
Voltage : 25mV/DIV approx. in 500 termination
Frequency Response : DC - 10MHz
Output Impedance - 500 approx

❑ CALIBRATION OUTPUT
Waveform :1 kHz ± 5%, square wave
Voltage : 2Vpp ± 2%
Impedance 2k0 approx

❑ SPECIAL FUNCTION
TIME / DIV Auto Range ( MOS-6103 / 6061 / 6060 ) : Provided
Panel Setting Save Recall ( MOS-6103 / 6061 / 6060): 10 set
Panel Setups Lock Provided






D6F-PH0505AD3 Differential Pressure Sensor 50Pa

D6F-PH0505AD3 is a sensor for measuring the pressure difference. Besides these components have been using the technology MEMS Mass Flow high impedance.

Sensing Range±50 Pa
Flow Sensor TypeAir
Voltage - Input2.3 V ~ 3.6 V
Port SizeMale, 0.193" (4.9mm) Tube, Dual
Switch Function/Rating-
Material - BodyPPS
Operating Temperature-20°C ~ 80°C (TA)

20MHz Analog Desktop Oscilloscope VOS-328

20MHz Analog Oscilloscope 

Main Features: 
• Auto sweep circuit in full frequency bandwidth in trigger system
• Flexible trig mode to selelect one signal or external input signal trig
• Alt trig function to observe two different signal synchronized
* Trig output and output the signal of CH1 & CH2

Vertical Deflection 

  • Operation Mode CH1, CH2, Alt, Chop, ADD, X-Y 
  • Sensitityity 5mV/diy,‘,10V/div 1-2-5 step, 11 calibrated steps; ±5% 
  • Frequency Bandwidth DC: 0,-20MHz -3dB/ AC: 10Hz-20MHz -3dB 
  • Frequency Bandwidth x 5 MA DC: 0,-5MHz -3dB / AC: 10Hz,u5M1-1z -3dB 
  • Input Impedance 1±50/0MW/530pF(direct) 10±50/0M01/523pF(yia probe) 
  • Rise Time 518ns 
  • Max. Input Voltage  400V (DC+AC Peak) 
  • Input Coupling System AC-GND-DC 

Horizontal Deflection 
  • Sweep Mode : Auto, Trig, Trig Lock, Single Time 
  • Sweep Rate : 0.1ps/div-0.2s/div±50/0, in 20 calibrated steps (1-2-5 squ.)±5%
  • Expansion  : x 5 error ±10% 

Trigger 
  • Trigger Source : CH 1,CH2,Alt,Line, Ext
  • Trigger Coupling :   AC/DC(ext) Normal/TV  
  • Polarity : + , -
  • Sync frequency:  Auto 50Hz-,20MHz 

X-Y Operation 
  • Operation Mode. X: CH1, Y:CH2 
  • Deflection As vertical axis 
  • Frequency response AC: 10Hz-1MHz -3dB;  DC: 0-1MHz -3dB 
  • Input Impedance 1MOhm +/- 2% , , 25pF +/- 3pF 
  • Phase Difference 3°(DC-50kHz) 

Z axis 
  • Input Impedance 10k0. 
  • Max. Input Voltage 50V(DC+AC Peak)
  • bandwidth  DC-5MHz 

General Information 
  • CRT: 6 inch square internal scale, 8x10cm (1cm= ldiv) 
  • Power Voltage 220V±10% or 110V±10% 
  • Dimension :320(H)x130(W)x400(D) mm 
  • Weight :Approximate: 7.2Kgs 

Specification is correct at the time of printing, and will change without prior notice 


Mean Well DRP-480S-24

Mean Well DRP-480S-24 specifications: AC-DC Industrial DIN rail power supply; Output 24Vdc at 20A; metal case;

Specifications

Max. output480 W
Output typeSingle
Output description24V,0-20A
 
Power supply typeAC/DC power supply
Enclosure typeDIN rail
 
RoHSCompliant
Suitable for medicalNo
DimmableNo

Input

Input rangePhase(s)
180 - 264 VAC1
90 - 132 VAC1

Output

VoltageCurrent
24 VDC0 - 20 A

Saturday, April 09, 2016

Stacking Header for Arduino

Stacking Header For Arduino Board or other boards.

  • Amphenol terminal type PCB / PCB Female Header
  • Shape (female / male) Female (up), male (bottom)
  • 2.54mm pitch
  • Pin number refer to avaiable Stacking header
  • PCB mounting

available Stacking Header

  • 10X1
  • 8X1
  • 6X1
  • 5X1
  • 3X2

VA1205S-2W DC-DC Converter Fixed Input Isolated, Regulated Output

VA1205S-2W DC-DC Converter Fixed Input Isolated, Regulated Output

Regulator DC-DC Converter with specifications:
- High Power Density
- SIP Package
- Dual Output Voltage
- Industrial Standard Pin-Out
- Without the need for a heat sink
- 1K VAC Isolation
- Regulated Output Voltage Rohs Compliant?

  • 12 VDC power supply input
  • 5 VDC power supply output

VA0512S-2W DC-DC Converter Fixed Input Isolated, Regulated Output

Regulator DC-DC Converter with specifications:
- High Power Density
- SIP Package
- Dual Output Voltage
- Industrial Standard Pin-Out
- Without the need for a heat sink
- 1K VAC Isolation
- Regulated Output Voltage Rohs Compliant?
PCB MOUNTING

  • packaging Throughole
  • 5VDC input power supply
  • 12VDC power supply output