Monday, June 23, 2014

Clone PICkit 3 Programmer/Debugger

As the clone of Microship PICkit 3 programmer/debugger, this item is a simple, low-cost in-circuit debugger that is controlled by a PC running MPLAB IDE (v8.20 or greater) software on a Windows platform. The PICkit 3 programmer/debugger is an integral part of the development engineer’s tool suite. The application usage can vary from software development to hardware integration. 
This PICkit 3 programmer/debugger is a debugger system used for hardware and software development of Microchip PIC microcontrollers (MCUs) and dsPIC Digital Signal Controllers (DSCs) that are based on In-Circuit Serial Programming (ICSP) and Enhanced In-Circuit Serial Programming 2-wire serial interfaces. In addition to debugger functions, the PICkit 3 programmer/debugger system also may be used as a development programmer.

The debugger system executes code like an actual device because it uses a device with built-in emulation circuitry, instead of a special debugger chip, for emulation. All available features of a given device are accessible interactively, and can be set and modified by the MPLAB IDE interface.


Features of Clone PICkit 3 Programmer/Debugger :

  • Size: 93.50(L) × 39.80(W) × 12.90(H) ±0.2mm 
  • Full-speed USB support using Windows standard drivers 
  • Real-time execution 
  • Processors run at maximum speeds 
  • Built-in over-voltage/short circuit monitor 
  • Low voltage to 5V (1.8 to 5V range) 
  • Diagnostic LEDs (power, active, status) 
  • Read/write program and data memory of microcontroller 
  • Erase of all memory types (EEPROM, ID, configuration and program) with verification 
  • Peripheral freeze at breakpoint


Features of MCU Universal ZIF socket use with PICkit 3:


This high quality board assemble one 18-pin DIP ZIF socket, one 20-pin DIP ZIFsocket and one 40-pin DIP ZIF socket.The socket allows one to insert and remove a chip without special tools. With these ZIF sockets, the development board could insert 18-pin ~ 40-pin MCU easily.It's pefect choise to connect to some programmers for PIC MCUs, like PIC KIT 2, PIC ICD2 and etc.Also you could use it to program other type MCUs. 


Applications:


Program and debug application

IR Kit For Arduino

This kit is used to add a remote control on the capacity of the project Arduino or other microcontroller project. 

specifications: 
- Working voltage: 5 VDC 
- Interface: Digital 
- Frequency: 38 kHz

7-key remote control user defineable

This 7-key remote control is really a good item for you. This product is user-definable, allowing you to redefine the keys’ functions to realize the remote control to the devices you want, such as volume or power control in amplifier application, movement control of curtains, brightness, color and power control of lights, etc. Use an infrared decoder to receive and transmit the data of the keys to a processor (like PC, MCU) on which you can write new programs to redefine the keys’ functions. Sure makes the process easier by supplying the corresponding hexadecimal of each key.
This remote control utilizes NEC IR encoding mode and integrates SC6122 IC as the remote control transmitter which utilizes CMOS Technology specially designed for use on infrared remote control applications. This remote control is small in size and easy-to-use with only 7 keys. Its smooth rounded shape fits perfectly in your hand for natural, balanced operation. Seven dome keys integrated are sensitive and durable to use.
You may refer to the manual in download center for details of NEC protocol. In addition, we also provide the combination of the remote control and a mating decoder.

Features:
  • Size: 110.00(L) × 45.00 (W) ×18.30(H)±0.20mm
  • Compact and durable
  • Black, ABS packaging
  • Powered by two 1.5V AA batteries
  • Long service time: 3 years
  • Straight transmission distance: 8m
  • Available to use keys 100.000 times
  • Low power consumption


Specifications:

    Parameter
    Value
    Condition
    Power Voltage
    DC2.2V- DC3.2V
    -
    IC Quiescent Current
    > 0.1 mA

    IC Low-voltage Detection
    2.4V ± 0.1V (OTP)
    2.4V ± 0.1V (Normal)
    -
    Power Consumption (Average)
    8-10mA
    -
    Power Consumption (Max)
    30-50mA
    -
    Storage Temperature and Humidity
    -10℃ + 60℃, 90%RH(MAX)
    -
    Operating temperature and humidity
    0℃ + 55℃, 85%RH(MAX )
    -
    Resonant Frequency
    Resonant frequency: 455KHZ ± 1.5KHZ
    Carrier wave: 37.9KHZ ± 125KHZ
    Temp 25℃
    Humidity: 65%- 80%RH
    Straight Distance
    8.0m
    Temp 25℃
    Humidity: 65%- 80%RH
    Supply voltage: 3.0V
    Test environment: 350Lux
    Same receiver
    Supply voltage: 3.0V
    Test environment: 350Lux
    Same receiver
    Direction
    Up, down, left, right direction 15° at min. 5.0m distance
    -
    Leakage Current
    <5ua p="">
    No key pressed
    Power Supply
    DC 2.2V-DC 3.2V
    -
    Material of Keys
    PET, force: 120-180g
    -
    LED consumed
    35mA ± 0.5mA
    VDD DC 3.0V

Applications:
  • Volume control in amplifier application
  • Smart Home like color, brightness and power control of lights, movement control of curtains
  • Other remote control applications
Package Contents:
  • Small 7-key User-definable Remote Control ×1
Note:
The accessories might be a little different from what you've seen on webpage since the accessories you received might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos.

Dynamixel FR07-F101K frame set

This frame is used to add an axis of rotation on the Dynamixel servo

specifications: 
- Compatible with Dynamixel:
- RX-24F type N101
- RX-28 N101-type
- MX-28T
- MX-28R
- Completeness: 
- 1x FR07-F101K (Black)
- 1x FR07-S101 (Silver)
- 1x HN07-I101
- 1x Bearing MF106ZZ
- 1x RX-28 Bearing Cap
- 8x Wrench Bolt M2.5 * 6
- 1x Wrench Bolt M2.5 * 8
- 18x Bolt Wrench M2 * 3
- 4x Nut M2.5

Dynamixel FR07-X101K Frame set

Frame set to connect two Dynamixel servo

specifications: 
- Compatible with Dynamixel:
- RX-24F type N101
- RX-28 N1 type
- RX-28 N101-type
- MX-28T
- MX-28R
- Completeness: 
- 2x FR07-X101K (Black)
- 4x Wrench Bolt M2.5 * 6
- 4x Wrench Bolt M2.5 * 8
- 4x Nut M2.5

Thursday, June 19, 2014

Emic 2 Text-2-Speech Module

The Emic 2 Text-to-Speech Module is a multi-language voice synthesizer that converts a stream of digital text into natural sounding speech. Its simple command-based interface makes it easy to integrate into any embedded system.

Key Features:   

  • High-quality speech synthesis for English and Spanish languages   
  • Nine pre-defined voice styles comprising male, female, and child   
  • Dynamic control of speech and voice characteristics, including pitch, speaking rate, and word emphasis   
  • Industry-standard DECtalk text-to-speech synthesizer engine (5.0.E1)


Application Ideas:   

  • Reading Internet-based data streams (such as e-mails or Twitter feeds)   
  • Conveying status or sensor results from robots, scientific equipment, or industrial machinery   
  • Language learning or speech aids for educational environments

Technical Specs:

  • Single row, 6-pin, 0.1² header for easy connection to a host system   
  • Power requirements: +5 VDC, 30 mA idle, 46-220 mA active (depending on speech parameters and output load)   
  • Communication: Asynchronous 9600 bps serial (8N1)   
  • Dimensions: 1.25" W x 1.5" L x 0.37" H (3.17 W x 3.81 L x 0.94 H cm)   
  • Operating temperature: -20 to +70 °C (-4 to +158 °F) 

RFID technology for vehicle access control and parking system

Secure and efficient access control and management of external as well as internal premises such as Vehicle access control, parking areas and buildings. RFID technology has become popular because of the variety of choices including UHF and battery assist Active as well as the low cost of entry to begin using the technology. In addition, traditional access control systems that use magnetic stripe and proximity cards are being replaced by UHF and Active RFID technologies that combine security with convenience.


RFID has become the technology of choice when it comes to improving and automating access security. Some reasons for incorporating RFID with your over-all access control requirements include:
  • Enhanced security by limiting access to restricted areas
  • Limit access to only authorized personnel
  • Tracking and recording employee activity
  • Loss prevention
  • Compliance to legislated regulations
  • Convert from an outsourced to user owned system
  • Lower Cost of Ownership
That's why a commercial property management company installed RFID System Technology operated vehicle access barriers for their tenants

The Thin Library Tag


The Thin Library Tag



Physical characteristics

  • Dimensions: 104mm×5.5mm×0.28mm 
  • Material: glassine paper, PET and aluminum 
  • Weight: ±0.26g/piece


User environments 
  • Operating temperature: -40 to +85℃ 
  • Storage temperature: -20 to +50℃ 
  • Humidity: ≤ 80% 
Performance characteristics
  • Operating frequency: 860-960MHz 
  • Supported standard: EPCglobal C1 Gen2 and ISO18000-6C 
  • Read distance: up to 5m (configuration dependent) 
  • Write distance: up to 2.5m (configuration dependent) 
  • EPC: 256 bits 
  • User data: 512 bits 
  • TID: 96 bits 
  • TID memory: 112 bits 
  • Access password: 32 bits 
  • Kill password: 32 bits 
  • User password: 32 bits 
  • Functionality: R/W 
  • Data retention: 20 years 
  • Write endurance: 10,000 
  • Polarization: Linear 
  • Anti-collision: Simultaneous identification

Friday, June 13, 2014

Powerex Imedion Ni-MH 950mAh AAA size (4pcs)

Rechargeable AAA Battery 950mAh Ni-MH battery production Powerex 

specifications: 
- Voltage: 1.2V / battery
- Rechargable: Rechargeable up to 1000 times
- Capacity: 950mAh
- Battery Type: NiMH

Powerex Imedion Ni-MH 2400mAh AA size (4pcs)

AA size Rechargeable Battery 2400mAh Ni-MH battery production by Powerex 

specifications: 
- Voltage: 1.2V
- Rechargable: Rechargeable up to 1000 times
- Capacity: 2400mAh
- Battery Type: NiMH