Saturday, November 30, 2013

STR-P711

DEVELOPMENT BOARD FOR STR711 ARM7TDMI-S MICROCONTROLLER


FEATURES

  • MCU: STR711FR2T6 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash, 64K Bytes RAM, USB 2.0, RTC, 12 bit ADC, 4x UARTs, 2x I2C,2x SPI, 5x 32bit TIMERS, 2x PWM, 2x CCR, WDT, up to 50MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • Two channel RS232 interface and drivers
  • SD/MMC card connector
  • Two buttons
  • Trimpot connected to ADC
  • Two status LEDs
  • Buzzer
  • UEXT - 10 pin extension connector for Olimex addon peripherials like MP3, RF2.4Ghz, RFID etc. modules
  • 2x SPI connectors
  • I2C connector
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 6V AC or DC required, USB port can power the board
  • Power supply LED
  • Power supply filtering capacitor
  • RESET circuit
  • RESET button
  • 4 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 120 x 80 mm (4.7 x 3.15")

STR-H711

HEADER BOARD FOR STR711 ARM7TDMI-S MICROCONTROLLER




FEATURES


  • MCU: STR711FR2T6 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash, 64K Bytes RAM, USB 2.0, RTC, 12 bit ADC, 4x UARTs, 2x I2C,2x SPI, 5x 32bit TIMERS, 2x PWM, 2x CCR, WDT, up to 50MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • Perfect solution for developing USB peripherials
  • USB connector
  • RESET circuit
  • RESET button
  • Status LED
  • Power supply LED
  • On board voltage regulator 3.3V with up to 800mA current 
    single power supply: takes power from USB port or extension connector pin
  • 4 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 50 x 34mm (2 x 1.3")
  • Distance between the exntension connectors: 25.4 mm (1")

STR-E912T

DEVELOPMENT BOARD FOR STR912 ARM966 MICROCONTROLLER WITH CAN, USB, RS232, ETHERNET TFT LCD DISPLAY


FEATURES


  • MCU: STR912FW44X ARM966E-S 96Mhz, 512K+32K internal Flash, 96K internal RAM, external bus, 9 DMA channels, 10bit ADC, 10/100Mbit Ethernet MAC, 3x UARTS, USB 2.0, CAN,
  • 128x128 pixel 12 bit color TFT LCD with backlight
  • Joystick with four directions and push action, analogue trimmer potentiometer connected to ADC input
  • ETHERNET 100 PHY KSZ8721BL
  • RS232 drivers and connectors
  • USB connectors
  • CAN driver and connector
  • SD/MMC card (on bottom of the board)
  • IrDA transciever on board (optional)
  • Audio Output
  • Audio Input
  • Speaker on board with volume control
  • UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
  • JTAG interface (optional JTAG-TRACE connector)
  • ADC extension port
  • Extension ports for all unused microcontroller ports
  • External memory bus connector
  • Li-ion CR2032 battery connector for the RTC
  • Dimensions: 145x130 mm (5.7 x 5.1")

MAXQ-H2000

MAXQ2000-RAX HEADER BOARD


FEATURES


  • MCU: MAX2000-RAX up to 20 Mhz( single clock per instruction i.e. up to 20MIPS), low power 190 uA @ 8Mhz, power supply 1.8-2.5V, 16 bit microcontroller with 64 KB Flash (10K re-programming cycles), 2KB RAM, 3x 16bit Timers, 2x UART, 1x SPI, 1-wire, build-in driver for 132 segment LCD
  • JTAG connector
  • 20 Mhz (on socket) and 32 768 Hz oscillator crystal
  • Two on-board power supply voltage regulators supplying +2.5V to core and +3.3V to GPIOs
  • PWR_JTAG allow board to be power supplied by the JTAG (if MAXQ-JTAG-USB is used)
  • Power supply filtering capacitors
  • Extension headers for each uC pin on 0.1" row header
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions: 47x47 mm (1.8x1.8")
  • Space between the pin rows: 43.18 mm (1.7")

MAXQ-P2000

MAXQ2000-RAX PROTOTYPE BOARD

FEATURES

  • MCU: MAX2000-RAX up to 20 Mhz( single clock per instruction i.e. up to 20MIPS), low power 190 uA @ 8Mhz, power supply 1.8-2.5V, 16 bit microcontroller with 64 KB Flash (10K re-programming cycles), 2KB RAM, 3x 16bit Timers, 2x UART, 1x SPI, 1-wire, build-in driver for 132 segment LCD
  • JTAG connector
  • 20 Mhz (on socket) and 32 768 Hz oscillator crystal
  • 2x RS232 connectors, one can be used for code bootloader
  • 1x SPI port on connector
  • 1-wire connector
  • Buzzer
  • Li-io 3V battery connector on board (no RS232 power supply when using this battery)
  • Two buttons on ports with interrupts
  • RESET button
  • Status LED
  • Power supply LED
  • Two on-board power supply voltage regulators supplying +1.8-2.2-2.5V to core and +3.3V to GPIOs
  • PWR_JTAG allow board to be power supplied by the JTAG (if MAXQ-JTAG-USB is used)
  • Power supply filtering capacitors
  • Extension headers for each uC pin on 0.1" row header
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions:100x80 mm (1.8x1.8")
  • Prototype area with GND and 3.3V bus
  • Power jack connector for AC/DC power supply

MAXQ-2000STK

MAXQ2000-RAX STARTERKIT EVALUATION BOARD


FEATURES


  • MCU: MAX2000-RAX up to 20 Mhz( single clock per instruction i.e. up to 20MIPS), low power 190 uA @ 8Mhz, power supply 1.8-2.5V, 16 bit microcontroller with 64 KB Flash (10K re-programming cycles), 2KB RAM, 3x 16bit Timers, 2x UART, 1x SPI, 1-wire, build-in driver for 132 segment LCD
  • LCD display
  • JTAG connector
  • 20 Mhz (on socket) and 32 768 Hz oscillator crystal
  • RS232 connector, one can be used for code bootloader
  • SPI port connector
  • 1-wire iButton connector
  • Buzzer
  • Li-io 3V battery connector on board
  • four buttons on ports with interrupts
  • RESET button
  • Two on-board power supply voltage regulators supplying +1.8-2.2-2.5V to core and +3.3V to GPIOs
  • Board can be powered by the JTAG (if MAXQ-JTAG-USB is used)
  • Power supply filtering capacitors
  • Extension headers for each uC pin on 0.1" row header
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions:100x80 mm (1.8x1.8")
  • Prototype area with GND and 3.3V bus
  • Power jack connector for AC/DC power supply

Friday, November 29, 2013

USB TC-08 Thermocouple Data Logger

The TC-08 Thermocouple Data Logger offers industry–leading performance and is an inexpensive answer to your temperature measuring needs.




Features:
8 channel thermocouple data logger 
Measure from 1 to 160 thermocouples 
Measures from -270 to +1820 °C 
Automatic cold junction compensation 
High resolution and accuracy 
Fast sampling rate — up to 10 measurements per second 
USB interface 

Wide temperature range
The TC-08 thermocouple data logger is designed to measure a wide range of temperatures using any thermocouple that has a miniature size thermocouple connector. Additionally, the TC-08 can also measure other sensors using a 70 mV range.

Featuring built-in cold junction compensation (CJC), the TC-08 has an effective temperature range of -270 to +1820 °C (the actual temperature range depends on the thermocouple being used).
All the benefits of USB

The TC-08 connects to the USB port of a Windows based PC and enables the host PC to automatically detect the TC-08 — avoiding the need for any complex setup procedures. The USB connection also allows the TC-08 to be powered directly by the USB bus — eliminating the need for an external power supply and making the TC-08 ideal for measuring temperatures both in the lab and in the field.


Measure up to 160 thermocouples simultaneously
The TC-08’s USB connectivity allows up to 20 TC-08 USB data loggers to be used simultaneously on one PC — making the TC-08 ideal for use as a large multi–channel temperature acquisition system with a cost per channel significantly lower than other systems of this size.

Fast and accurate temperature data acquisition
With the TC-08 thermocouple data logger your measurements can be made both fast and accurately.

The low conversion time of the TC-08 means up to 10 temperature measurements can be taken every second. Whilst the high (20–bit) resolution ensures that the TC-08 can detect minute changes in temperature.
All you need in one easy–to–use unit

Temperature data acquisition with the TC-08 is very easy — simply plug the TC-08 into a USB port on your computer, connect your thermocouples, and you are ready to measure temperatures.

The easy-to-use PicoLog data acquisition software is supplied with the TC-08 — allowing you to start measuring and recording temperatures with the minimum amount of effort. The intuitive user interface of PicoLog makes it easy for you to set how frequently you want to take a measurement, and the number of measurements you want to take.

Specifications

USB TC-08 Thermocouple Data Logger General Specifications
Number of channels (per TC-08)8
Maximum number of channels
(using multiple TC-08s)
160
Conversion time100 ms (thermocouple and cold junction compensation)
Temperature accuracySum of ±0.2% of reading and ±0.5 °C
Voltage accuracySum of ±0.2% of reading and ±10 µV
Overload protection±30 V
Maximum common mode voltage±7.5 V
Input impedance2 MΩ
Input range (voltage)±70 mV
Resolution20 bits
Noise free resolution16.25 bits
Thermocouple types supportedB, E, J, K, N, R, S, T
Input connectorsMiniature thermocouple
PC Requirements
MinimumProcessor: 1 GHz
Memory: 512 MiB
Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT)
Ports: USB 2.0 compliant port
RecommendedProcessor: 1 GHz
Memory: 512 MiB
Free disk space: 32–bit: 850 MB, 64–bit: 2 GB
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT)
Ports: USB 3.0 compliant port
Physical Properties
Dimensions201 x 104 x 34 mm (7.91 x 4.09 x 1.34 in)

TC-08 Resolution

Thermocouple typeOverall range °C0.1°C resolution0.025°C resolution
B20 to 1820150 to 1820600 to 1820
E-270 to 910-270 to 910-260 to 910
J-210 to 1200-210 to 1200-210 to 1200
K-270 to 1370-270 to 1370-250 to 1370
N-270 to 1300-260 to 1300-230 to 1300
R-50 to 1760-50 to 176020 to 1760
S-50 to 1760-50 to 176020 to 1760
T-270 to 400-270 to 400-250 to 400

Applications for the TC-08

The TC-08 thermocouple data logger is used successfully throughout the industrial, scientific, medical and the food industries

Narrow Band Powerline Communication Module with Simple MAC

Electrical module of communication line through the media (Power Line Communication) with a TTL UART. This module serves as a converter of Power Line Communication to UART TTL nor vice versa.

specification:
- Voltage electrical lines for communication: 110 VAC 60 MHz, 50 MHz 220 VAC, 12-16 VDC, or without voltage
- Working voltage module is taken from the path of the power line so it does not require an external power supply
- There is a power supply output 5 VDC, 500 mA
- Interfaces: UART TTL
- Baud rate: 600, 1200, 2400, 4800, 9600, 19200
- The length of the frame data communication: 20 Byte (max)
- Data rate: 500 bps (power line)
- Range: up to 1000 meters (depending on the condition of the power line)

iMCU W7200 - ARM32bit Cortex M3

iMCU W7200 - ARM32bit Cortex M3 with hardwired TCP/IP, MAC & PHY

ARM 32-bit Cortex-M3
  -
 72MHz maximum frequency (1.25 DMIPS/MHz)
  - 20KBytes Data Memory (RAM)
  - 128KBytes Code Memory
  - Low Power: Support Sleep, Stop and Standby modes
  - 7 timers
  - Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  - 2 watchdog timers (Independent and Window)
  - SysTick timer 24-bit down counter
  - Full-duplex UART
  - Programmable Watchdog Timer
  - CRC calculation unit, 96-bit unique ID
  - GPIO, SPI, USART and USB Interfaces
  - 10BaseT/100BaseTX Ethernet PHY embedded


Hardwired TCP/IP
   - Power down mode supported for saving power consumption
   - Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
   - Auto Negotiation (Full-duplex and half duplex), Auto MDI/MDIX
   - ADSL connection with PPPoE Protocol with PAP/CHAP Authentication mode support
   - 8 independent sockets which are running simultaneously
   - 32Kbytes Data buffer for the Network
   - Network status LED outputs (TX, RX, Full/Half duplex, Collision, Link, and Speed)
   - Not supports IP fragmentation 

Dynamixel MX-106T (TTL)

Dynamixel MX-106T (TTL)

H/W Specification
  • MCU : ST CORTEX-M3 ( STM32F103C8 @ 72MHZ,32BIT)
  • POSITION SENSOR : Contactless absolute encoder (12BIT,360 DEGREE)
  • MOTOR : Maxon
  • BAUD RATE : 8000 bps ~ 4.5 Mbps
  • CONTROL ALGORITHM : PID CONTROL
  • Resolution : 0.088°
  • Running Degree
  • 0° ~ 360°
  • Endless Turn
  • Weight : 153g
  • Dimension : 40.2mm x 65.1mm x 46mm
  • Gear Reduction Ratio : 225 : 1
  • Stall Torque
  • 8.0N.m (at 11.1V, 4.8A),
  • 8.4N.m (at 12V, 5.2A)
  • 10.0N.m (at 14.8V, 6.3A)
  • No load speed
  • 41rpm (at 11.1V)
  • 45rpm (at 12V)
  • 55rpm (at 14.8V)
  • Running Temperature : -5℃ ~ +80℃
  • Voltage : 10 ~ 14.8V (Recommended Voltage 12V)
  • Command Signal : Digital Packet
  • Protocol Type
  • MX-106T (Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity))
  • Link (Physical)
  • MX-106T (TTL Level Multi Drop Bus)
  • ID : 254 ID (0~253)
  • Feedback : Position, Temperature, Load, Input Voltage, etc.
  • Material : Full Metal Gear, Engineering Plastic Body
  • Standby current : 100 mA