Wednesday, October 24, 2012

http://arduino.rosesana.com

New subdomain created with Ads FREE : http://arduino.rosesana.com



Mifare hospital wristband tag

Mifare hospital wristband tag


Smartcard Contacless bracelet that can be used for access control
- Working frequency 13.56 MHz
- Range + 5cm
- Used for access control, hospitals, etc.
- Can be added to the logo, barcode or serial number on the plastic wrapping smartcard

Monday, October 22, 2012

WizFi630-EVB

WizFi630-EVB



WizFi630-EVB , Evaluation Board for WizFi630 Module- Complies with IEEE 802.11 b/g/n
- Physical link rate up to 150Mbps (Effective Rate : 90Mbps)
- Operation Mode : Gateway, AP (Bridge), AP-Client, Client, AD-HOC 
- Supports 3 Ethernet Ports (10/100 Fast Ethernet)
- Supports 2 UART (1200bps to 921,600bps)
- 1T1R RF Interface
- Security : WEP 64/128bit, WPA/WPA2-PSK TKIP, AES and 802.1x
- Easy Configuration : Built-in Web Server, Serial Command, Windows Utility
- CE, FCC, KCC Certified


Block Diagram of WizFi630-EVB


WizFi630-EVB Kit- WiFi630 Evaluation Board
- WizFi630 Module
- RS-232 Cable
- Ethernet Cable
- Antenna
- Power Adaptor (5V, 2A)

WizFi220-EVB – Evaluation Board for WizFi210 module

WizFi220-EVB – Evaluation Board for WizFi210 module


 Bring WiFi connectivity via Serial Host Interface
- Quick Booting Time : under 20msec
- Ultra Low Power through Dynamic Power Management (34µA at the Standby mode)
- Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b)
- Security Protocol : WEP, WPA/WPA2-PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)
- Operation Temperature : -40℃ ~ 85℃
- Compact Size : 32 x 23.5 x 2.9 (mm)
- CE, FCC, KCC Certified

Specification
SpecificationsDescription
Radio ProtocolIEEE 802.11b/g/n Compatible
Supported Data Rates11, 5.5, 2, 1 Mbps (IEEE 802.11b)
ModulationDSSS and CCK
RF Operating Frequency2.4 - 2.497 GHz
Antenna OptionsChip antenna and U.FL connector for external antenna
Networking ProtocolsUDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
Power Consumption
(Typical)
Standby = 34.0 µA
Receive = 125.0 mA
Transmit = 290 mA
RF Output Power (Typical)17dBm ± 1.5dBm
Security ProtocolsWEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP(**)
I/O InterfaceUART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
Power Source3.3V
Dimensions
32 x 23.5 x 3 mm
(*) is supported by software customizing
(**) is supported by dedicated firmware
         

WizFi630 - High Performance 802.11b/g/n Embedded WiFi Module

WizFi630 - High Performance 802.11b/g/n Embedded WiFi Module

Features:

- Complies with IEEE 802.11 b/g/n
- Physical link rate up to 150Mbps (Effective Rate : 90Mbps)
- Operation Mode : Gateway, AP (Bridge), AP-Client, Client, AD-HOC
- Supports 3 Ethernet Ports (10/100 Fast Ethernet)
- Supports 2 UART (1200bps to 921,600bps)
- 1T1R RF Interface
- Security : WEP 64/128bit, WPA/WPA2-PSK TKIP, AES and 802.1x
- Easy Configuration : Built-in Web Server, Serial Command, Windows Utility
- Compact Size : 33 x 43 x 4.5mm
- CE, FCC, KCC Certified


Specification

CategorySpecification
Wireless StandardIEE802.11b/g/n
Frequency Range2.400 ~ 2.483GHz(USA) 2.400 ~ 2.483GHz(Europe) 2.400 ~ 2.497GHz(Japan) 2.400 ~ 2.483GHz (China)
Output Power802.11b: 17dBm@11Mbps 802.11g: 14dBm@54Mbps 802.11n: 14dBm@150Mbps/72Mbps
Receive Sensitivity802.11b: -89dBm@11Mbps 802.11g: -74dBm@54Mbps 802.11n(40MHz): -66dBm@150Mbps 802.11n(20MHz): -70dBm@72Mbps
Data RatesMax.150Mbps (Max 90Mbps Effective Data Streaming)
SecurityWEP 64/128bit WPA/WPA2-PSK AES/TKIP 802.1x(Radius)
Dimension (mm)33mm X 43mm X 4.5mm
InterfaceUART(2), PHY(3), U.FL (Wireless)
 

Friday, October 19, 2012

Netduino Go Starter Kits

No soldering required. This plug-and-play kit offers 4 times the speed (168MHz), 6 times the code space (384KB) and twice the RAM (100KB+) of the Netduino Plus. The peripherals are virtualized and contain a microchip that works with the mainboard. 

All you have to do is pick what you need and plug it in. The kit is designed to get you up an running quickly. It includes the Netduino Go mainboard, one button module, shield base (beta, see below) module, potentiometer module, RGB LED module, two 5cm Go cables, two 10cm Go Cables, and a 3 foot micro USB cable. It's like freedom, in the form of electrons. 

All Netduino Go hardware is production hardware. We're shipping the production Shield Base hardware with early beta firmware so that we can get wide feedback on this new virtualization technology. And to say thank you for beta testing the Shield Base, we've temporarily upgraded its 128KB-flash MCU to a full-blown 512KB-flash 120MHz Cortex-M3 microcontroller. 

You can connect it to power and a USB-TTL serial cable and use it as a traditional Netduino if you'd like as well — while enjoying its 3 serial ports and other new enhancements. Both the Netduino Go and the Shield Base run production versions of .NET MF 4.2 QFE1 (RTM). 

 Features Includes: 
  • Processor and Memory STMicro 32-bit 
  • Microcontroller Speed: 168MHz, Cortes-M4 
  • Code Storage: 384 KB RAM: 100+ KB STM32F405RG 
  • STM32F405RG 
  • LEDs Power 
  • LED: White 
  • Socket LEDs: 8 blue Buttons Activates bootloader (hold on boot) Can be used as GPIO input I/O Features All 8 sockets are compatible with Go Bus Modules Up to 2 sockets are compatible with Gadgeteer S-U-X modules. 
  •  Power Input: USB powered 
  • Output: 5 VDC and 3.3 VDC Switched Max Current: 25 mA per pin Digital I/O are 3.3V (5V tolerant) 
  • Environmental Operating Temperature: 0 - 70 °C (32 - 158 °F) 
  • RoHS Compliant 
  • Lead free

HP 1410-24 Switch (J9663A)


HP 1410-24 Switch (J9663A)


Specifications:
Technical specifications
MountingMounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table mounting
Memory and processorstorage: 16 Kb EEPROM, packet buffer size: 2 Mb
Latency100 Mb Latency: < 11 µs (LIFO 64-byte packets)
Throughputup to 3.5 million pps (64-byte packets)
Switching capacity4.8 Gbps
Connectivity and communications
General protocolsIEEE 802.1p Priority; IEEE 802.3ab 1000BASE-T; IEEE 802.3i 10BASE-T; IEEE 802.3u 100BASE-X; IEEE 802.3x Flow Control; IEEE 802.3z 1000BASE-X
Power and operating requirements
Power consumption4.8 W (maximum)
Input voltage100-240 VAC; 12 V (depending on power supply chosen)
Input operating current0.4 A
Input frequency50/60 Hz
SafetyUL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Electromagnetic compatibilityFCC Rules Part 15, Subpart B Class A
Operating temperature range0 to 40°C
Operating humidity range15 to 95% @ 104°F (40°C) (noncondensing)
Operating altitudeup to 3 km
Acoustic pressure emissionsPower: 0 dB
Heat dissipation17 BTU/hr (17.93 kJ/hr)
Dimensions and weight
Minimum dimensions (W x D x H)33.6 x 16.89 x 4.39 cm
Weight1.35 kg

Meanwell S-145-24 145Watt Single Output Switching Power Supply

Meanwell S-145-24 145Watt Single Output Switching Power Supply

Features:

  • AC input range selectable by switch
  • Protection: short circuits , overload, over voltage
  • Cooling by free air convection
  • 100% full load burn-in test
  • fixed switching frequency at 25KHz
  • Led Indicator for power on
  • High reliability
  • 12 month Warranty  by factory

Friday, October 12, 2012

Propeller Starter Kit + Official Guide


This kit pairs the comprehensive Propeller Manual with the highly capable Propeller Demo Board and The Official Guide for an attractive savings. By following the steps in the Spin Tutorial that is included in the free Propeller Tool Software’s Help file, you will get a step-by-step introduction to programming on the Propeller Demo Board. This board is pre-wired to connectors for interfacing with devices such as a mouse, keyboard, TB or VGA monitor, and speakers, and is also configured for immediate use by many objects from the Propeller Object Exchange.

This starter kit is sold with version 1.1 of the (#122-32000) Propeller Manual. USB A to Mini B cable included. Power supply sold separately.

The Propeller Manual v1.1 begins with an introduction to the Propeller chip’s architecture and Spin programming language, debugging techniques, and sensor interfacing. Then, the remainder of the book introduces eight diverse and powerful applications, ending with a speech synthesis demonstration written by the Propeller chip’s inventor, Chip Gracey.
Numerous illustrations and example programs accompany each application. Example source code and other related resources are available for free download from ftp://ftp.propeller-chip.com/PCMProp!

Kit Contents:
  • Propeller Demo Board
  • Propeller Manual v1.1
  • Type A to mini B USB cable
Key Specifications:
  • Power requirements: 6 - 9 VDC
  • Communication: N/A
  • Dimensions: 3 x 3 in (76 x 76 mm)
  • Operating temp range: +32 F to +183 F (0 C to +70 C)

Monday, October 08, 2012

The LPC1769 LPCXpresso board


The LPC1769 LPCXpresso board with NXP's ARM Cortex-M3 microcontroller is part of NXP's low-cost development toolchain for LPC families. It has been jointly developed by Embedded Artists, Code Red, and NXP. It is an end-to-end solution for creating applications all the way from evaluation through to production. Here are some of the highlights:

• The target board comes with an integrated JTAG Debugger. No need for a separate emulator!

• A free Eclipse-based IDE and compiler is included (128K download limit)

• Easy upgrade options to full-blown suites (from Code Red) and hardware kits (from Embedded Artists).

Board specifications
Processor NXP's Cortex-M3 LPC1769 microcontroller in LQFP100 package
Flash 512 kB
Data Memory 64 kB
Clock Crystals 12.000 MHz crystal for CPU
Dimensions 35 x 140 mm
Power 3.15V-3.3V external powering, or
from USB via JTAG probe (LPC-LINK)
Connectors All LPC1769 pins available on expansion connector (2x27 pin rows, 100 mil pitch, 900 mil between rows)

Other
• Embedded JTAG (LPC-LINK) functionality via LPCXpresso toolchain
• LPC-LINK can be connected to external target processor after modifications to the LPCXpresso board
• LED on PIO0_7

LPC1769 device specifications
Processor ARM Cortex-M3 core with speed up to 120 MHz
Flash 512 kB
RAM 64 kB
Ethernet interface 10/100 Ethernet MAC

USB interface
• USB 2.0 Host
• USB 2.0 Device
• USB 2.0 OTG
Serial interfaces 2xCAN, 4xUART, 3xI2C, 2xSSP, 1xI2S

Timers
• Four 32-bit counter/timers
• One Watchdog timer

PWM/Motor controller
• PWM/timer block
• Motor control PWM with support for three-phase motor control
• Quadrature encoder interface

ADC/DAC
• 12-bit ADC with input multiplexing among 8 pins
• Single 10-bit DAC output

Other
• Serial Wire Debug and Serial Wire Trace Port
• Integrated PMU to minimize power consumption
• Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
• Code Read Protection (CRP) with different security levels