Sunday, September 16, 2012

ACR1281U-C1 DualBoost II Dual Interface Smart Card Reader Software Developer Kit

ACR1281U-C1 DualBoost II is the second generation of ACS’s ACR128 DualBoost Reader. It is a dual interface reader that can access any contact and contactless smart cards following the ISO 7816 and ISO 14443 standards. ACR1281U-C1 DualBoost II enables one to integrate conventionally separate and independent applications for contact and contactless technologies into one device and one card.

ACR1281U-C1 DualBoost II comes in a complete Software Development Kit (SDK), which contains vital components for facilitating the development of contact and contactless smart card applications. The SDK provides the user with sample applications, tools and utilities, and sample codes, enabling them to conveniently and effectively incorporate ACR1281U-C1 into their solutions.

Contents:
Smart Card Reader(s)
  • 1 x ACR1281U-C1 Dual Interface Smart Card Reader
Test Card(s)/ Token(s)
  • 5 x Mifare 1K Cards
  • 5 x ACOS3 Microprocessor-based Contact Smart Cards
  • 1 x ACOS6-SAM (Secure Access Module) Smart Card
CD-ROM
  • Tools & Utilities
    • QuickView
    • EasyKey
    • PC/SC Learning Tool
    • Scrip Tool 3
    • Smart Card and Reader Tool
  • Sample Codes
    • Demonstrates basic commands used to communicate with the cards and reader
    • Available in the following programming languages: Java, Jave (x64), Visual Basic 6.0, Visual Basic .NET 2008, Visual Basic .NET 2008 (x64), Visual C# .NET 2008, Visual C# .NET 2008 (x64), Visual C++ 6.0,  Visual C++ (x64), Active X C#, Linux C++, and Linux C++ (x64)
  • Sample Application
    • Loyalty Application
  • Reference Manuals
SDK Operating System Support
  • Win XP, Win Vista, Win 7
  • Win XP x64, Win Vista x64, Win 7 x 64

WIZ820IO module

WIZ820io contains WIZnet’s hardwired Ethernet stack IC W5200, which supports eight independent sockets simultaneously, and features a high-speed SPI interface, power-down mode, and Wake-On-LAN function. WIZ820io handles TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, and MAC protocols.
In addition, the module has been equipped with MAG-JACK (RJ-45 is equipped with a filer). This module can be easily connected to the microcontroller via the SPI.

specifications:
- Power supply: 3.3VDC
- Chip: W5200
- Support 10/100 Base Tx
- Support Full / Half Duplex
- The interface to the microcontroller: SPI
- Supports protocols: TCP, IPv4, UDP, ICMP, ARP, PPPoE, IGMP
- 8 Socket simultaneous independent
- Packaging: 23mm x 25mm

WizFi630 module – WiFi on all ways, including AP, Client and Gateway

Compact embedded module WizFi630 enables to connect any serial RS232 device to a TCP/IP network. However it´s not all. By supporting 3 Ethernet ports, it offers a wide variability to connect another devices to a Wi-Fi network, in various operation modes.

Novelty from company Wiznet – WizFi630 module provides, besides the RS232/ Wi-Fi interface, even many other functions, which place it to a category of routers. Via 2 UART and 3 Ethernet ports it is possible connect several devices in various modes of operation: AP (Access point), Client , AP client and Gateway. These modes are best illustrated in attached picturs. For a development support, we offer you a novelty – WizFi630EVB evaluation board with complete accessories for a promo price in a limited amount – with almost 50% discount.

specifications:
- Power supply: 3.3VDC
- Working frequency: 2.4GHz
- Interface: UART
- Data rate: 921600bps (UART)
- Modulation: DSS, OFDM

Features:
  • high-performance Wi-Fi module with the RS232 interface
  • 90 Mbps effective rate
  • IEEE 802.11 b/g/n
  • 2 UART and 3 Ethernet ports
  • usable as a Wi-Fi router, AP, AP-client, Client, AD-HOC
  • 64/128 bit WPA/WPA2-PSK TKIP, AES
  • easy configuration via a built-in web server, serial commands or a Windows utility
  • CE, FCC, KCC certificates


WizFi630-EVB Evaluation Board for WizFi630 Module

WizFi630-EVB Evaluation Board for WizFi630 Module
This module is equipped with 3 LAN connector, two serial ports and a few other supporting components.

specifications:
- Power supply: 5VDC
- 2 UART port (DB-9), 3 Port LAN (RJ-45)
- There are internal 3.3VDC regulator
- Equipment: 1x WizFi630, WizFi630-EVB 1x, 1x Antenna, Cable 1x Serial, 1x LAN Cable, 1x Adaptor 5VDC

Features:
Complies with IEEE 802.11 b/g/n
Physical link rate up to 150Mbps (Effective Rate : 90Mbps)
Operation Mode : Gateway, AP (Bridge), AP-Client, Client, AD-HOC
Supports 3 Ethernet Ports (10/100 Fast Ethernet)
Supports 2 UART (1200bps to 921,600bps)
1T1R RF Interface
Security : WEP 64/128bit, WPA/WPA2-PSK TKIP, AES and 802.1x
Easy Configuration : Built-in Web Server, Serial Command, Windows Utility
CE, FCC, KCC Certified

Friday, September 14, 2012

Leaf Maple (leaf labs)

ARM Cortex-M3 microcontroller module with 72MHz PCB design and pinout compatible with Arduino. In addition, the software also provided a compiler that has the look and format of writing that is compatible with the arduino.

Specifications

  • MCU: STM32F103RBT6, a 32-bit ARM Cortex M3 microprocessor
  • Clock Speed: 72 MHz
  • 128 KB Flash and 20 KB SRAM
  • 43 digital I/O pins (GPIOs)
  • 15 PWM pins at 16 bit resolution
  • 15 analog input (ADC) pins at 12-bit resolution
  • 2 SPI peripherals
  • 2 I2C peripherals
  • 7 Channels of Direct Memory Access (DMA) (dma.h)
  • 3 USART (serial port) peripherals
  • One advanced and three general-purpose timers
  • Dedicated USB port for programming and communications
  • JTAG
  • Nested Vectored Interrupt Controller (NVIC) (including external interrupt on GPIOs)
  • Supplies up to 500 mA at 3.3 V, with separate 250 mA digital and analog regulators for low-noise analog performance
  • Open source, four layer design
  • Support for low power, sleep, and standby modes (<500 br="br"> Operating Voltage: 3.3 V
  • Input Voltage (recommended): 4 V — 12 V
  • Dimensions: 2.05″ × 2.1″

W5200E01-M3

W5200E01-M3 W5200 Evaluation Board based on Cortex M3.
W5200 module that has been equipped with ARM Cortex-M3 microcontroller STM32F103C8 As with all media to test the ability of W5200. This microcontroller can be programmed using the C language through the USB port.

specifications:
- Power Supply: USB / 5VDC
- Integrated with W5200 and the ARM Cortex-M3 STM32F103C8
- Available MAG-JACK RJ-45
- There FT232R that acts as a USB to UART Converter
- Has 40 pin DIP layout.
Item
Description
TCP/IP core
W5200
MCU
STM32F103C8 (Cortex-M3 core)
USB-to-Serial Converter
FT232RQ with USB mini type connector
MAG-Jack
BS-RB10005 (Transformer + RJ-45 Connector)
LED
User LED 2Ea
Serial Status LED 2Ea
Power LED 1Ea
Button
Reset Switch 1Ea
Program Enable Switch 1Ea
Expansion Port
MCU port expansion
- in 2.54mm Pitch 40Pin-Header
PCB Size
28mm * 52mm

Features:

  • Using W5200 Hardwired TCP / IP Core
  • Using STM32 MCU(ARM based Cortex-M3 core)
  • MAC-Jack
  • 40pin expansion pin-header
  • Power indicate LED, Serial TX / RX LED and 2 user LED
  • Mode select switch and Reset switch
  • Connect with the PC USB port directly for the power and Serial interface
  • RoHS Complient

Picoscope 2205 25MHz USB Oscilloscope

Picoscope 2205 (2-channel 25MHz USB Oscilloscope with 100kHz Arbitrary Waveform Generator)

A complete test and measurement lab
Your PicoScope 2200 is not only a powerful dual–channel oscilloscope: using the same PicoScope software for Windows that comes with our high–end scopes, you can also use your PicoScope 2200 as a multimeter, spectrum analyzer, function generator and arbitrary waveform generator (AWG)

With the PicoScope 2200 range of entry–level USB oscilloscopes you get an oscilloscope, spectrum analyzer and arbitrary waveform generator all in one powerful and affordable device.

These compact, inexpensive oscilloscopes have all the power you need for your application, whether it’s design, research, test, education, service or repair. They are available with bandwidths from 10 MHz to 200 MHz and offer the features and performance of scopes that are several times their size — and their price.

Unparalleled performance
The PicoScope 2200 range includes the first USB–powered oscilloscopes capable of sampling at one gigasample per second. Previously such high sampling rates were only available on mains–powered scopes, and never available on entry–level devices. For repetitive signals the sampling rate can be increased to as much as ten gigasamples per second using equivalent–time sampling. These high sampling rates combined with the ability to store up to 40,000 samples in the scope’s buffer memory and analogue bandwidths of up to 200 MHz make the PicoScope 2200 range suitable for use in a wide variety of applications.

Features:
  • Up to 1 GS/s real–time sample rate
  • Up to 10 GS/s repetitive signal sample rate
  • Up to 200 MHz bandwidth
  • Up to 40,000 sample buffer memory
  • Small footprint — ideal for field work
  • Built–in Arbitrary waveform generator (AWG)
  • Free software updates
  • 5–year warranty (factory)



ADS1022CL 25MHz Digital Storage Oscilloscope

ADS1000ML/CL+Series digital storage oscilloscope

Feature
1.500Msa/s & 1Gsa/s Sampling Rate
2.2 Channels
3.7’’Widescreen LCD Color Display
4.8x18 div time window
5.USB Host/Device:Support USB Printer and USB Flash Drive
6.PictBridge Software
7.12 Language
8.Screen saver function

Applications
1.Industial Power Design,Troubleshooting,and Maintenance
2.Electronics Design,Troubleshooting,Installation,and Maintenance
3.Circuit Design & Debug
4.Educational Lab & Training Institutions
5.Repair & Service
6.Production Test & Quality Inspection

Specifications:
- Sampling rate: 500 Msa / s
- Input Impedance: 1M? / 17pF
- 2.5ns/div-50s/div time base
- Maximum input voltage: 400 VPP
- Display: 7 "Wide Screen TFT Color LCD (480 x 234)
- Display screen: 8 x 18 DIV
- Equipped with a digital filter function to reduce signal noise and filter error signal
- Equipped with auto measure for measuring multiple parameters of the signal
- Equipped EasyScope 3.0 software for communication with the computer
- Trigger modes: Auto, Normal, Single
- Trigger source: CH-1/2, EXT, AC Line
- Power supply input voltage: 100-240 VAC
- Dimensions: 399 mm x 110.5 mm x 148.5 mm
- The choice of several languages ​​for easy operation
- Interface: USB Host, USB Device, RS-232

Thursday, September 13, 2012

Sanfix Q-38 toolset kit

Sanfix Q-38 toolset kit (22 item)

  1. digital multimeter
  2. Soldering iron 60watt (goot brand)
  3. solder stand
  4. solder tin
  5. desoldering pump
  6. cutter
  7. testpen / AC voltage tester
  8. adjustable wrench 6".
  9. solder assist set (3 pcs)
  10. alignment tool 150mm
  11. reversible screwdriver (+0 , -3)
  12. reversible screwdriver (+1 , -4)
  13. reversible screwdriver (+2 , -6)
  14. Snip
  15. Solder wick
  16. long nose plier 6".
  17. side cutter plier 6".
  18. diagonal nipper 6".
  19. micro nipper 4.5".
  20. hex key set
  21. wire stripper
  22. parts box



Friday, September 07, 2012

ATMEGA88-20AU TQFP32

Atmel ATMEGA88-20AU TQFP32


FLASH Memory Size

8192 B

Number of Pins

32

Clock Speed

20.0 MHz

Supply Voltage (DC)

5.00 V, 5.50 V (max)

Lead-Free Status

Lead Free

Packaging

Tray

Case / Package / Footprint

TQFP-32

Memory Size

8000 B

RAM Memory Size

1024 B

Access Time

20.0 µs

Mounting Type

Surface Mount

Number of I/O Pins

23

RoHS

Compliant