Friday, February 24, 2012

Sanfix DC to AC inverter

Inverter sanfix made in taiwan with optional DC input 12V / 24V and output 220VAC / 50/60Hz.


available power output:

  • 150 watt
  • 300 watt
  • 600 watt
  • 1200 watt

Sanwa CD772 Digital multimeter

Sanwa CD772 Digital multimeter


Basic Features

  • 3-3/4 digits 4000 count
  • AC True RMS
  • Easy to read large LCD with Backlight
  • Large breaking capacity fuse 30kA
  • K-type thermocouple temperature measurement -20℃~300℃
  • Thermo plastic elastomer, high resistance against drop shock
  • Safety cap on current terminal
  • Data hold, Range hold, Relative function
  • Continuity check, Diode test
  • Auto power off function (30min.)
  • Download Manual ZIP file
  • Display : numeral display 4000
  • Sampling rate : 3 times / sec.


AC frequency bandwidth

  • 45-500Hz (4V range)
  • 45-1KHz (40V range and above)

Thursday, February 16, 2012

Dekko ST-10 solder stand

Dekko ST-10 solder stand

Tuesday, February 14, 2012

Mint Plus , intelligent robot for house cleaner

Mint can both dry sweep dust, dirt and hair and wet mop to get out deeper dirt and grime from your hard surface floors. Simply attach a cleaning cloth, set Mint down and press either the Sweep or Mop button. After cleaning, just throw out disposable cloths or rewash and reuse the included microfiber cloths designed just for Mint.
Mint is ideal for picking up pet hair every day, but its whisper-quiet operation means your pets won’t be bothered while Mint cleans.
Mint’s compact size gets under furniture, into tight spaces and other hard to reach places.
PerfectEdge™ technology allows Mint to clean right along walls and edges, and around chair legs and other obstacles for a complete clean.
Mint’s smart sensors avoid stairs, area rugs and raised transitions to carpet

Features:
  • Mint Plus can clean up to 2,000 square feet in a single dry sweeping cycle with additional NorthStar Cubes. Guided by the NorthStar® Navigation System, Mint tracks where it cleans so it doesn’t miss a spot.
  • Mint Plus charges in as fast as 4 hours with the included adapter or in just 2 hours with the Turbo Charge Cradle.
  • Mint Plus’s rechargeable battery cleans for up to 4 hours dry sweeping or 2.5 hours wet mopping on a single charge. That’s 25% more cleaning time.
  • Mint Plus can be paused mid-cycle to change cleaning cloths, retain its map and resume cleaning an area not yet covered
  • Self dispensing reservoir pad and microfiber cloth mop better and further than ever before

Friday, February 10, 2012

X-Board V2 microcontroller (Arduino Compatible)

This is Version 2.0 of the X-board. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol with out the need of a voltage level converter.
The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet connectivity to your projects. Its great for anything from home automation to robot control. The possibilities are endless!
It has 8 Analog I/O pins and 8 digital pins, 4 of which have PWM (indicated by an asterisk). It is compatible with all XBee modules, and also comes with an integrated socket for APC220 RF Module or DF-Bluetooth Module. The XBoard can be programmed via an FTDI programmer or via the ICSP header. Power is provided through a Mini USB connector. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules.

Specifications
  • MCU:Atmega328P low voltage version (16Mhz)
  • Ethernet:WIZ5100
  • Arduino Uno bootloader
  • Supply voltage:5~12v
  • Output voltage:5v/3.3v
  • Digital IO: 8
  • Analog In: 8
  • Envionment Friendly: Rohs Compliance
  • Informational LED
  • PWR: indicates that the board and shield are powered
  • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
  • FULLD: indicates that the network connection is full duplex
  • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
  • RX: flashes when the shield receives data
  • TX: flashes when the shield sends data
  • COLL: flashes when network collisions are detected

Dome PIR Detector Paradox PA-465

PA-465 by Paradox is Dome Pasive Invrared Sensor. The installation of the sensor module can be placed in the ceiling or wall.

specifications:
- Power supply: 9VDC-16VDC
- There is a relay contact output configuration with NO / NC
- Measurement of vertical distance: 3.6 m
- Wide measurement range: 8m
- Angle jangkuan measurement: 360 °
- Equipped with a lens to direct the infrared beam
- Packaged in a protective plastic

Low cost PIR sensor module with fresnel lens

This is a Low Cost version for PIR module series from COMedia Ltd. Its designed for cost sensitive consumer product, except the IC package format, all the mechanical and electrical spec is same as KC7783.
Passive Infrared (PIR) Module is a module that is useful for detecting the presence of a movement by humans. This module works by keeping the temperature before and then compare it with the current temperature, if there is a difference then it is considered there is a difference. This module uses a passive infrared sensor.

Features:
  • IC soft package b dice bonding technique
  • small size 25*35mm
  • ball lens is included as standard configuration
  • 3 leads flat cable for easy connection
  • 4 mounting hole on board
  • high sensitivity
  • high immunity to RFI
  • power up delay to prevent from false triggering
  • output high for direct connects to control panel


Specifications:
- DC Power Supply: 4.7 - 12 V
- Range of Detection: 5 Meter (Max) at an angle of 0 °
- High Output Voltage: 5 V
- Output Pulse width: 0.5 Sec (Min)

Tuesday, February 07, 2012

Dry Battery 6V / 1.3Ah

Dry Battery


Specification / Features:
- Capacity: 6V / 1.3AH
- Maintenance Free
-Weight : 300g (net weight)
-Dimension : 95*50*20mm

Carbon Kevlar Hexapod Robot Kit, The 2nd Pro version

Hexapod robot kit is 6 feet by 3 degrees of freedom for each leg. Designed by using the carbon kevlar material is very light so as to make the robot can move without a great power. Equipped with a hexapod motion to set the firmware via the serial port
This robot kit also uses a battery with a voltage of 7.4 Volt to 6 Volt and is regulated for each leg servo with Low Drop Output Regulators robot so that the performance does not decrease when the battery capacity begins to decline

Specs and equipped:
- The total weight including servo motor 1500 mg
- The size of the robot:
* Length 28 cm
* The width of 28 cm when docked
* The width when stretched 35 cm
Height 18 cm
- 12 Motor Servo HS-645 MG
- 6 HS-225 Servo Motor BB
- 1 HS-311 Servo Motor
- Microcontroller System Firmware ATMega32 + hexapod
- Does not require an external downloader (Onboard USB Downloader)
- D-Ultrasonic Sonar Range finder to detect obstacles
- Battery 7.4V / 5200mAh
- 6 Low Drop Regulator Module Output current capacity of each robot 3A for each leg

Carbon Kevlar Hexapod Robot Kit, Pro version

Hexapod robot kit (6 feet) by 3 degrees of freedom for each leg. Designed by using the carbon kevlar material is very light so as to make the robot can move without a great power. Equipped with a hexapod motion to set the firmware via the serial port

Specification and equipped:
- The total weight including servo motor 1500 mg
- The size of the robot:
* Length 28 cm
* The width of 28 cm when docked
* The width when stretched 35 cm
* Height 18 cm
- 12 Motor Servo HS-645 MG
- 6 HS-225 Servo Motor BB
- 1 HS-311 Servo Motor
- Microcontroller System Firmware ATMega32 + hexapod
- Does not require an external downloader (Onboard USB Downloader)
- D-Ultrasonic Sonar Range finder to detect obstacles
- Battery 6V / 4000mAh