Tuesday, April 05, 2011

Wireless Camera Set for Bioloid (WCS-1)

Wireless Camera Set for Bioloid (WCS-1)
SPEC ITEM MODEL 2.4GHz WIRELESS CAMERA

  • Image Sensor 1/3" Color CMOS
  • Effective Pixels NTSC 510(H) x 492(V) PAL 628(H) x 582(V)
  • Shutter Speed 1/60 ~ 1/15,000 sec
  • Horizontal Resolution 380 TV Lines
  • S/N Ratio (AGC Off) 48dB ( AGC Off )
  • Fixed Pattern Noise 0.33%Vp-p
  • Built-in Lens 6.0mm Fixed (F6.1)
  • White Balance AWB
  • Automatic Gain Contro ON
  • Channel Frequency ( GHz ) CH1 : 2.410, CH2 : 2.430, CH3 : 2.450, CH4 : 2.470
  • Frequency Type F9W
  • Communication Method Direct Communication
  • Channel Selection By DIP Switch
  • Output Power 10mW
  • Output Impedance 75 Ohm
  • Dynamic Range 72dB
  • Power Source from Adaptor or Battery, 5V ± 0.2V DC , Max. 170mA
  • Dark Current 0.2nA/cm 2
  • Operating Temperature 0°C to 50°C
  • Operating Humidity 30% to 90% Non Condensing
  • Dimension (mm) 26(W) x 33(H) x 26(D)

Saturday, April 02, 2011

Fargo DTC1000 card printer

FARGO DTC1000
Direct-to-Card Printer
Designed for small to medium businesses, the DTC1000 provides maximum efficiency in a sleek user-friendly and versatile design. This printer is virtually maintenance-free and prints full-color plastic ID and technology cards on a budget.

Features:
  • High quality output – Simple, reliable and affordable photo ID card personalization, delivering a new level of durable, great- looking credentials.
  • Simply plug-and-play – The intuitive user- focused design allows for easy setup, loading and operation for increased efficiency.
  • Convenient and affordable – Create ID cards right out of the box with its plug-and-play Swift ID™ embedded badging application.

Specifications

Print Method Dye-Sublimation / Resin Thermal Transfer
Resolution 300 dpi (11.8 dots/mm) continuous tone
Colors Up to 16.7 million / 256 shades per pixel

Print Ribbon Options • Full-color with resin black and overlay panel, YMCKO*, 250 prints
• Full-color half-panel with resin black and overlay panel, YMCKO*, 350 prints
• Full-color with two resin black panels and overlay panel, YMCKOK*, 200 prints
• Resin black and overlay panel, KO*, 500 prints
• Dye-sublimation black and overlay panel, BO*, 500 prints
• Resin black (standard and premium), 1000 prints
• Resin green, blue, red, white, silver and gold, 1000 prints
• Rewrite technology - No ribbon is required

Print Speed** 7 seconds per card (K*); 12 seconds per card (KO*); 24 seconds per card (YMCKO*); 31 seconds per card (YMCKOK*)

Accepted Standard Card Sizes CR-80 (3.375˝L x 2.125˝W / 85.6mmL x 54mmW); CR-79 Adhesive Back (3.313˝L x 2.063˝W / 84.1mmL x 52.4mmW)

Print Area CR-80 edge-to-edge (3.36˝L x 2.11˝W / 85.3mmL x 53.7mmW); CR-79 (3.3˝L x 2.04˝W / 83.8mmL x 51.8mmW)

Accepted Card Thickness .009˝ - .040˝ / 9 mil - 40 mil / .229mm - 1.016mm

Accepted Card Types PVC or polyester cards with polished PVC finish; monochrome resin required for100% polyester cards; optical memory cards with PVC finish; rewrite

Input Hopper Card Capacity 100 cards (.030˝ / .762mm)

Output Hopper Card Capacity Up to 30 cards (.030˝ / .762mm)

Card Cleaning Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change

Memory 32 MB RAM

Software Drivers Windows XP / Vista (32 bit & 64 bit) / Server 2003 & 2008 / Windows 7 (coming soon) / Linux

Interface USB 2.0, optional Ethernet with internal print server

Operating Temperature 65° to 80° F / 18° to 27° C

Humidity 20–80% non-condensing

Dimensions Single-Sided Printer: 8.8˝H x 13.7˝W x 7.9˝D / 224mmH x 348mmW x 201mmD
Dual-Sided Printer: 9.8˝H x 18.7˝W x 9.2˝D / 249mmH x 475mmW x 234mmD

Weight Single-Sided: 7.5 lbs / 3.4 Kg; Dual-Sided: 10 lbs / 4.54 Kg

Agency Listings Safety: UL 60950-1, CSA C22.2 (60950-1), and CE; EMC: FCC Class A, CRC c1374, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KCC

Supply Voltage 100-240 VAC, 3.3 A

Supply Frequency 50 Hz / 60 Hz
Warranty Printer – Two years; Printhead – Two years, unlimited pass with UltraCard™

Encoding Options 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693) read/write encoder; Contact Smart Card Encoder reads
from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO Magnetic Stripe
Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3

Options Single Wire Ethernet and USB 2.0 interface for inline printing and encoding (note: single wire Ethernet encoding is only available for iCLASS and contact smart card encoding); Dual-Sided Printing Module; Smart Card Encoding Modules(contact/contactless); Magnetic Stripe Encoding Module; Printer Cleaning Kit; Ethernet with Internal Print Server Software Swift ID™ Embedded Badging Application, FARGO Workbench Diagnosis Utility

Display Color changing status buttons

Printer Security Kensington lock compatibility

* Indicates the ribbon type and the number of ribbon panels printed where This data sheet is for informational purposes only. HID Global makes no warranties,
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, B=Dye expressed or implied, in this summary. Company and product names and data used in Sublimation Black. sample output are fictitious. Specifications are subject to change without notice. Fargo and
Asure ID are registered trademarks of HID Global in the U.S. and/or other countries.
** Print speed indicates an approximate print speed and is measured from All other trademarks, service marks, and product or service names are trademarks or the time a card drops into the output hopper to the time the next card drops registered trademarks of their respective owners. This is not an offer of sale. into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size

DS1621 digital thermometer and thermostat

The DS1621 Digital Thermometer and Thermostat provides 9-bit temperature readings, which indicate the temperature of the device. The thermal alarm output, TOUT, is active when the temperature of the device exceeds a user-defined temperature TH. The output remains active until the temperature drops below user defined temperature TL, allowing for any hysteresis necessary.

User-defined temperature settings are stored in nonvolatile memory so parts may be programmed prior to insertion in a system. Temperature settings and temperature readings are all communicated to/from the DS1621 over a simple 2-wire serial interface. 

FEATURES
  • Temperature measurements require no external components
  • Measures temperatures from -55°C to +125°C in 0.5°C increments. Fahrenheit equivalent is -67°F to 257°F in 0.9°F increments
  • Temperature is read as a 9-bit value (2-byte transfer)
  • Wide power supply range (2.7V to 5.5V)
  • Converts temperature to digital word in less than 1 second
  • Thermostatic settings are user definable and nonvolatile
  • Data is read from/written via a 2-wire serial interface (open drain I/O lines)
  • Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any  thermal sensitive system
  • 8-pin DIP or SO package (150mil and 208mil)

MLX90247ESF-C discrete infrared thermopile detector

MLX90247ESF-C discrete infrared thermopile detector

Features and Benefits
  • Solid state thermopile sensor
  • On-chip thermistor for ambient temperature compensation
  • High reliability and long-term stability
  • Very high ESD protection – 7 kV on all pins (only for
  • MLX90247BAA and MLX90247BAL)
  • Low cost, small size

Applications
  • Automotive contactless temperature sensing.
  • IR thermometers
  • Gas analysis equipment
  • Occupancy detection

iCODE X628-C Fingerprint with Mifare Card support & Time Attendance

iCODE X628-C Fingerprint with Mifare Card support & Time Attendance
Automated time and attendance recording devices based on fingerprints and RFID
iCODE X628C support RFID mifare

Specifications:
- Power Supply: 5VDC
- Storage capacity: 1500 fingerprints
- Able to store 50,000 attendance data
- Quick fingerprint analysis: 1 -2 seconds
- Algorithm: Biokey VX6.0
- Compatible with RFID cards: Mifare 13.56 MHz
- interface: RS-232, TCP / IP
- Media information: Color LCD
- Available in Indonesian (Bahasa)

Thursday, March 31, 2011

HaViMo2 - Image Processing Module (for Robotis/ Robobuilder)

HaViMo is a computer vision solution for low power microprocessors. It is equipped with a CMOS camera chip and a microcontroller which performs the image processing. The results are then accessed via serial port. In HaViMo2 several features such as frame rate are improved.

In addition to the region growing algorithm available in prior versions, a new algorithm is implemented called Griding. The algorithm is a suitable pre-processing step for many other applicationssuch as object recognition and self localization.

The compatibility area of the module is also extended to more software and hardware platforms. HaViMo2 is compatible with ROBOTIS and RoboBuilder bridges. It can also be integrated in programs developed in Roboplus. Other platforms can also communicate with the module using either half or full-duplex serial protocols.

Features:
Havimo 2.0 Camera /Vision Module for Robot
  • Integrated Color CMOS Camera
  • Frame Resolution: 160*120 Pixels
  • Color Depth: 12 bits YCrCb
  • Frame Rate: 19 Fps
  • Full Access to all CMOS Camera registers
  • Color-Based Image Processing
  • Integrated Color Look-up Table
  • On-line Region-growing
  • On-line Griding
  • Raw image output in both calibration and implementation modes
  • Supported Hardware
  • Half Duplex (ROBOTIS)
  • Full Duplex (RoboBuilder)
  • Requirements for other platforms
  • TTL level RS232
  • 115200 BAUD for Full Duplex Mode (RoboBuilder Mode)
  • 1 MBAUD for Half Duplex Mode (ROBOTIS Mode)
  • Supported Software
  • Roboplus (ROBOTIS)
  • Direct C programming (ROBOTIS)
  • RBC firmware
  • Direct C programming (RoboBuilder)

HaViMo Vision Module 1.5 for Bioloid

HaViMo is a Vision Module for Bioloid that gives the Robot the ability to detect multiple Colour BLOBs and navigate in familiar environments such as a Robocup football field or a maze autonomously. The module was developed by Berlin's Free University for the RoboCup humanoid robots of FU-Berlin, the “FUmanoids”, that won the 3 Place of the RoboCup 2007 Humanoid League in Atlanta.

Havimo V1.5 for Bioloid
The Vision Module includes a dedicated image processor capable of identifying up to 16 different color areas (BLOBs) that are pre configured by the user. For each BLOB the module maintains different parameters such as:
  • Color ID
  • Center Coordinate
  • Bounding box
  • number of pixels, etc.
The module enables a relatively low end processor such as an Atmega128 to receive simple digests of image interpretation that in turn can be used to direct the robot towards targets such as a ball or out of a labyrinth.

Highlights:

Lightweight integrated camera and image processor Controlled and queried via Dynamixel protocol (1 wire, half duplex, TTL UART) Simple and affective way to implement real time image processing and interpretation, based on color regions. Able to Acquire images and send them to a remote PC . Can even be connected to a simple microcontroller (ATMEGA, PIC, ...) and easily add the ability track objects.

HaViMo maintains a large table with about 50 parameters that some can be read and others can be read and written to. Using the Dynamixel serial protocol, the bus controller can ask HaViMo 8 times/sec to send back information regarding the state of the 16 contiguous-color-areas (stored logically in this addressable table).

Technical Details:
  • Frame rate: 8 FPS
  • Resolution: 160*120 color
  • Image noise filtering; Auto Exposure; Auto White Balance
  • Image processor: MagnaChip HV7131RP
  • (old HaViMos of version 1.0 - sold until May 31st 2009 - used a MagnaChip HV7131GP)
  • Built in color lookup table
  • Detection of up to 16 contiguous color regions at 8hz in the captured Image
  • Output Format: 256 bytes after processing of each frame, containing information about the found color regions on the image, including coordinates, dimensions,...
  • Communication Protocol: Dynamixel Standard Communication Protocol
  • Bus: One Wire TTL Bus (Interconnectable with AX-12+ servos on the Dynamixel Bus. A connector for the Dynamixel bus is mounted on board for easy assembly in the Bioloid Kit).
  • The HaViMo module can also be used with any other micro Processor that is capable of half duplex communication at 1Mbps.
(HaViMo 1.5 was designed for the Dynamixel bus which is a 1 wire, half duplex bus with a UART at TTL level).


Note: HaViMo Modules now come without the AX-12 case. They come as PCBs with holes strategically placed, to assemble it on the Bioloid Frames.

Brushless Vexta DC Motor AXH230K-5 & Driver board Package

Brushless Vexta DC Motor AXH230K-5

Specifications:
- power supply: 24VDC
- Input current: 3.4 A
- Output power: 30W
- Gear Ratio: 5
- initial Torque: 1.5 kgfcm
- Torque: 5.4 kgfcm @ 20 ~ 500r/min
- motor speed settings: internal, external potentiometer or an analog voltage (0-5VDC)
- Integrated functions: Start / Stop, Brake, Direction of rotation
- Overload, Out-of Phase, overvoltage, Undervoltage, Overspeed Protection
- Include: AXHM230K-GFH DC Motor and DC Motor Driver AXHD30K

Wednesday, March 30, 2011

Futaba S3003

S3003 is standard type servo motor by Futaba, with swivel angle 180 degrees.

Specifications:
- Torque: 44.4 oz-in @ 4.8 V or 56.9 oz-in @ 6.0 V. (4KG/cm)
- Speed​​: 0.23 sec/60deg @ 4.8 V or 0.19 sec/60deg @ 6.0 V.
- Dimensions: 1.6 x 0.8 x 1.4 ins.
- Weight: 1.3 oz.

Low Cost Super Microcontroller Trainer

Super Microcontroller Trainer is Professional Version Trainer Board module and designed so complex that a variety of applications can be implemented in it.

Features:
- 4Kb Internal Flash Program Memory for AT89S51, optionally can be used for MCU ATMega8515 ATMega8515 to add and change the jumper, optional can be used to ATMega8535 by adding a socket converter, can optionally be used for Renesas R8C by adding DST-Stamp
- Crystal Optional 12 MHz / 8 MHz
- Programming using USB (does not require a computer parallel port)
- 8 Push button
- 8 Dip Switches
- 8 LED
- RS232 Port
- 4 Channel ADC with adjustable VREF
- 1 Channel DAC with adjustable VREF
- 2x16 LCD with backlight
- + battery backup RTC
- Driver for DC Motor, Stepper Bipolar, unipolar Stepper
- 6 Seven segment with two points for the application of a digital clock
- Clock generator using PLL with frequency selection:
* Selector 1, 10 and 100 Hz
* Linear using the VR
- Pulse Generator uses TTL MMV with election timing
* Selector 50uS, 5ms, 50ms
* Linear using the VR
* Voice Amplifier + speakers 0.25W
* Buzzer
* The conditioning signal with zero offset and gain calibration
* Breadboard with 700 holes
* Add on to the printer interface
* Add on to the keyboard interface