Sunday, August 30, 2009

UltraSonic and InfraRed Ranger Module

UltraSonic and InfraRed Ranger Module.

This sensor module can measure distance with ultrasonic wave and can connected with 2 unit (i.e Sharp GP2D12) infrared ranger. This module easily connected to various microcontroller system and need only 1 input/output port. This module widely applicable on distance sensor, automatic door, security, smart robot , etc. Size: 2,6 cm (l) x 4,1 cm (w) x 6,2 cm (h).

Specs:
-2 kind of Activ interface I2C-bus (fSCL maks. 65 kHz) and pulse width (10µs/mm).
-. 8 modules that use together in I2C-bus system that only need 2 I/O microkontroler port.
-. +5 VDC ,17 mA typ. (without infrared ranger sensor) power supply.
-. 2 operating mode : Full operation and reduced operation. On
reduced operation several ultrasonic ranger component turn off when idle and less current consume only 13mA typ.
-each one ultrasonic ranger with specs:
· Length measure from 2 cm to 300 cm without dead zone or blank spot.
· Object within 0 - 2 cm detected as 2 cm.
· Use Square burst signal 16 Vp-p with 40 kHz frequency.
-. Can interfaceing with max 2 infrared ranger Sharp GP2D12 that can measure 10 - 80 cm.
-. output Data ready for use in mm (for I2C) ,that can reduce microcontroller load.
-. Measurement sensitivity (ranger) is 5mm.
-. Fast measurement cycle, read can do 25 ms (40 Hz rate).
-. Negative pulse TTL input trigger needed (20µs min.) for pulse width interface.
-. 1 pin output sensor available , for sensor activity.
-. No delay time needed for next measurement.
-. Error Compensation can controllable manually for reduce affected temperature and object reflectivity
-. C Program sample available (CodeVisionAVR©) for microkontroler AVR® AT90S2313 and BASIC (BASOM-8051©) for mikrokontroler MCS-51® family.

Metrologic MS5145 Eclipse Scanner

Metrologic MS5145 Eclipse Scanner

Remote-control style button reduces fatigue The Metrologic MS5145 Eclipse is a single-line, handheld laser scanner. Equipped with Metrologic's patented CodeGate, the MS5145 Eclipse can be used in a wide variety of applications. CodeGate allows the user to easily target the desired barcode and complete the data transmission with a simple press of a button. This combination makes the Metrologic MS5145 Eclipse a perfect selection for menu scanning, point-of-sale, document processing and inventory control.

PDX-800 The Parallel Port Data Acquisition Experiment Board


PDX-800 : The Parallel Port Data Acquisition Experiment Board.

This is an experiment board system for basic data acquisition. It can process analog signals of DC voltage 0 to +5V and convert them into digital data which is sent to a computer via parallel port interface. This data is then monitored by its graphic-user-interface based software.

Experimenters will learn about DAQ concepts and create their own experiments the DAQ experimental software. This kit is suitable for anyone who has interest in DAQ system. Visual programming knowledge is highly recommended.

Features :
* On-Board NTC thermistor 1k @ room temperature * On-board LDR light sensor * Input for resistance measurement : Maximum of 150kO * Input for voltage measurement : Maximum of +5Vdc * 4-Channel external analog input * 8-Bit A/D converter circuit using PCF8591 ICs * 2-Ch.8-bit D/A converter output of 0 to +5V * Connection via PC’s parallel port with buffer circuit

QX-108 analog digital converter board


QX-108
Features:

* PC Serial port interface
* 10-bit resolution
* 8-channel analog input of 0-5V
* Power Supply from external 9-12V DC adaptor
* On-board +5V regulator
* Supplied with source code in Delphi and VB in CD-ROM

Includes : QX-108
board, cable, Leaflet and SOFTWARE CD

Friday, August 21, 2009

SRF02 ultrasonic rangefinder

The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits, and may be connected directly to the serial ports on any microcontroller. Up to 16 SRF02's may be connected together on a single bus, either I2C or Serial. New commands in the SRF02 include the ability to send an ultrasonic burst on its own without a reception cycle, and the ability to perform a reception cycle without the preceding burst. This has been as requested feature on our sonar's and the SRF02 is the first to see its implementation. Because the SRF02 uses a single transducer for both transmission and reception, the minimum range is higher than our other dual transducer rangers. The minimum measurement range is around 15cm (6 inches). Like all our rangefinders, the SRF02 can measure in uS, cm or inches.

Wednesday, August 19, 2009

RFID V2 video door phone

V2 video door phone

Read EM Card. It is suitable for the entrances and exits of factory, office, commerce organization, house… and so on.

·TFT color LCD
·TFT brightness adjustment
·TFT chroma adjustment
·Direct talk
·Special single CCD, Clear picture
·Direct control electronic lock
·Monitor
·Alarm
·Unti-breakout
·Doorbell
·Read EM Card (125KHz)
·Working Voltage: 15V±10%
·Working Current: 250mA
·Relay load:3A
·Sending loudness=34dB
·Speaker loudness=75dB
·Ring loudness=75dB
·Operating noise: =60dB
·Operating Temperature: -10 - +45
·Humidity 20% - 80%
·Atmosphere pressure: 86KPa-106KPa
·Total cable length: =80m
·Communication lines used:53(RVV) 4 ×=1.0

I-SOBOT smallest programming robot

There's no shortage of fun with the amazing i-SOBOT, the World's Smallest Robot. Packed with over 200 words and phrases, and more than 200 pre-programmed movements, this robot can do everything from saying goodbye to dancing the hula. Recommended for kids aged 10 and up, the i-SOBOT is ready to rock 'n' roll right out of the box.

The i-Sobot offers up to 220 degrees of movement.
Smooth Robotic Movement With unbelievably smooth robotics, the i-SOBOT walks more like a human than a robot. This fully-functional and fully-assembled robot features 17 custom designed actuators and gyro-sensor, allowing it to keep balance and freely move joints for impressive performance, vivid movement, and incredible flexibility. Other main components include a built-in speaker unit and built-in microphone with a voice recognition chip. With built-in clutches and metal gears, the i-SOBOT offers up to 220-degree movement. The two infrared transmission bands allow the robot to be operated with an LCD remote control.

Robots Moves From Talking To Dancing Also performing by programmable memory and by the sound of your voice, the i-SOBOT will make your day and impress your friends with his moves.

Putting the meaning back into "action-packed," the 6.5-inch tall robot dances to the beat, does push-ups and somersaults, imitates animals, hula dances, plays air guitar, kicks and punches with sound effects, and even responds to applause. Not only does the i-SOBOT talk with a vocabulary of 200 words and phrases, it also plays its own music.

Product Description
He might be pocket-sized, but this miniature high-tech humanoid robot packs a huge punch. i-SOBOT is a 6.5-inch biped bot that's fully articulated, features voice command recognition and can speak a vocabulary of over 200 words and phrases. What's more, he can dance, perform his own special karate moves complete with self sound effects, and can motor forwards, backward, side-to-side or diagonally. He'll even lay down when he's had enough - and get back up again when it's time to go.

i-SOBOT is powered by 17 customs developed servo-motors and 19 integrated circuit chips. He features a built-in gyro sensor and comes fully assembled, ready for action. He can be controlled in a variety of ways: by pre-programmed actions, user programmed actions (done easily with the LCD remote control), or by real-time remote control or voice commands. Robot requires 3 "AAA" rechargeable batteries; remote requires 4 "AAA" Measures 6.5" tall.

EasyPRO 800 universal programmer

EasyPRO 800 / EasyPRO 500 a series universal programmer.

EasyPRO a major technological breakthrough, from performance to appearance to You! A new experience, great prices and competitive advantage all over the country's sales and service network is the only option for you. Sharpen up from Jianfeng Bao: With long-term accumulation of experience, consistent focus over the years, strong technology capacity, after three years.

Design of continuous improvement and the test of rigorous testing, EasyPRO800/500 to achieve new breakthroughs in the wide, high-speed, strong stability, broad support ...

Superior technology, flexible design: the leading pin detection, automatic restart function Insert become more efficient and convenient operation, the real achievement of the program.

Temporal database programming storage by the host computer, just download the free software upgrade, a flexible PC software designed to bring the unlimited potential of programmer, to adapt to future development.

Features
  • Top Block Lock import: choose the most inexpensive price, feel the most comfortable, the quality of the most reliable brand of the United States
  • "ARIES"'s 48PIN Locking Block, in order to make products more user-friendly, users better placed chip programmer to improve the speed, I would lock the handle to seat the "Left Edge and longer. "
  • Leading design: lessons of the 3 years to create electronic products mold shell to open the experience of the industry into a new design ideas and concepts, From the point of view of ergonomics should pay more attention to human nature, and form a more fluid appearance.
  • Leading technical support: learn the advantages of the world's most advanced programmer, through continuous improvement and testing, research the reliability of the device characteristics and circuit Start a new program designed to control the circuit and well-designed 4 layer circuit boards, the circuit self-generated noise to a minimum, At the same time ensure that every operating point control circuit waveform accuracy to achieve the goal of reliable chip programmer.
  • Built high-speed processors, timing programmer do not rely on PC, to ensure that the precise timing and high programming speed programming.
  • 48PIN-pin-wide drive to achieve universal and can be used for data bus, address bus, control bus, bus driver and the programming voltage contact pin does not Good measurement of a dedicated bus, such as, programming voltage, I / O port with the core-level change, automatic adaptation.
  • System default 500mA over-current protection circuit to prevent accidents completely; if there are special needs, over-current tolerance can be user Amend. At the same time, the port has a master chip over-voltage protection circuit to effectively prevent high-pressure at the time of the impact of programming.
  • Adapter without the use of expensive direct support 1.8V low-voltage block device, and program stability and reliable performance.
  • Using USB interface, fast and reliable, great save system resources to ensure that programming at the same time the barrier-free to run other programs.
  • Pin detection: reliable detection of the anti-chip interpolation, interpolation wrong and bad films, to enhance the burning of the OTP chip yield can be with any country Comparable to a time when well-known programmer.

Datalogic Heron Scanner


Datalogic Heron Scanner

The new Heron has been developed by Datalogic in order to satisfy all requirements at the POS, providing high performance and an innovative design suitable for small retail POS applications. The new Heron, based on the " Instinctive Reading Distance " concept (from near contact to over 20cm), includes the "green spot" (Datalogic patent application), which provides "good reading" feedback directly on the code, where the user usually tends to be looking.

ZX-SERVO16

ZX-SERVO16 - 16 CH. Serial Servo Controllers. This product or portions there of is manufactured under license from Parallax Inc., USA. Copyright Parallax Inc., 2000. All rights reserved.

Features :
  • Runtime Selectable Baud rate. 2400 to 38k4 Baud.
  • 16 Servos. All servos driven simultaneously all of the time.
  • 180 degrees of rotation.
  • Servo Ramping. 63 ramp rates (0.75 - 60 seconds) allows the user to set the speed of each servo on a per-move basis. You may choose one of 63 ramp rates for each servo.
  • The ramping function allows you to individually set the speed of each servo. With ramping, you can tell the servo where to go, and just how fast to get there. The result is true, “set-it and forget-it” functionality.
  • Speed range for 0 - 180 degrees of rotation is 0.75 second to 60 seconds.
  • Position Reporting. User may request position of an individual servo at any time. This command allows you to request the position of a servo channel, be it stationary or on the move.
  • Network Ready. Two modules may be linked together to drive 32 servos at the same time. It is possible to network two ZX-SERVO16 boards together to control up to 32 servos.
  • Simply use a second 3-Conductor cable to daisy chain two ZX-SERVO16 boards together as shown in the documentation. The presence of a shunt differentiates between Unit 0 (channels 0-15) and Unit 1 ( channels 16-31).
  • Enhanced Resolution. Use of 16-bit PWM timers enables 0 - 180 degree servo rotation at 2 microseconds per step.
  • Serial Command Format. ZX-SERVO16 supports several commands that are sent to it via RS-232 serial protocol. The voltage swing of this serial line is 0-5 VDC (TTL level). Each serial command must be preceded with an exclamation point, “!”, and the pair of letters, “SC”.