TCP / IP CONVERTER TO UART converter module is a 2-way serial UART to Ethernet-based WIZ105SR. This module can be used for TTL to Ethernet converter, RS-232 to Ethernet or RS-485 to ethernet. This module is properly used for LAN-based Presence system with a computer as a database server and sensor monitoring via LAN.
- WIZ105SR based modules (Serial to Ethernet Gateway).
- W5100-based and GC89L591A0 MQ44I.
- Supports TCP, UDP, IP, ARP, ICMP, MAC, PPPoE.
- Auto sensing 10/100 Base-T ethernet.
- Auto MDI / MDIX.
- MAG JACK is available for connection to a LAN network cable.
- UART TTL serial interface 3.3 V.
- Data transfer speeds up to 230 kbps.
- WIZ105SR UART configuration can be selected on the software with the help of WIZ105SR Configuration Tool.
- Baudrate: 1200 bps-230 kbps.
- Data: 7 or 8 bits.
- Parity: none, even, odd.
- Flow Control: none, XON / XOFF, CTS / RTS.
- RS-485 UART connection does not provide a connection flow control CTS / RTS.
- There are three types of two-way conversion of the UART TTL to Ethernet, UART RS-232 to Ethernet and UART RS-485 to ethernet.
- Equipped with a series of level converter 3.3 V to 5 V for TTL UART interface.
- There is a blue 3 pin connector for RS-485 termination (COM, D +, D-) to facilitate the installation of cables for RS-485 interface.
- There is a reset button to refresh the client-server connection.
- Available factory reset button can be used to restore all settings to the initial conditions WIZ105SR module (default).
- Available indicator pin header for connection to a client-server.
- 5 VDC power supply with two pin blue connector.
- Compatible with DT-Low Cost AVR series and support the system microcontroller / microprocessor another.
- Equipped with the Configuration Tool WIZ105SR, datasheet, manual, test program and schematic.
- Dimensions: 8.4 cm x 6.4 cm x 3.7 cm