LIPO 11.1V1800mAh LB-12

LIPO 11.1V1800mAh LB-12 Description -     Lithium Polymer rechargeable battery (for DARwIn only). -     PCM is incorporated to protect the batteryfrom overcharge, discharge, and excessive current. -     Cannot be used for Bioloids because it the connectorand size differs. -     Battery cover and extension cable are notincluded. -     Can be recharged with LBC-10 BatteryCharger. Components Component Quantity Battery LIPO 11.1V 1800mAh LB-12 1 * Battery Charger (LBC-10) sold separately Specifications Weight 106g Size 88 x 35 x 26mm Voltage 11.1V Current 1800mAh Discharge rate 5C Etc. PCM built-in (overcharge, discharge, excessive current protection)  Precautions ** Cannot be recharged via DARwIn and needs to be charged using a specific charger (LBC-10).  -     Do not drop or fold parts of the battery or its parts. -     Do not fold the end of the sutured portion. -     Do not apply heat, water or any other liquid on the battery. -     Do not place in the microwave, washing machine or dryer. -     Do not use damaged batteries. (inflated,deformed, damaged, etc) -     Do not short circuit the polarity. -     Do not take the battery apart. -     When charging, make sure the battery is connected into the correct polarity. -     Do not charge when the battery is hot. Please charge after it has cooled off. -     Battery will not charge when connected to the robot.   Storage Precautions - Detach the battery from the robot or controller when storing away. - When storing away the battery for a long time, make sure the battery life is around 50%. - Do not store it in wet or hot places. ** LIPO 11.1V 1800mAh LB-12 has a warranty period of 6 months. Compatible Products -  Robot :DARwIn-OP -  BatteryCharger: LIPO Battery Charger LBC-10 ** NOT compatible with the CM-Seriescontrollers.