Protek 307 - 3 3/4 Digit True RMS 1000A AC/DC Clamp-On Meter

Protek 307 - 3 3/4 Digit True RMS 1000A AC/DC Clamp-On Meter

• Measures AC/DC current to 1000A
• True RMS AC Measurements
• Measures true power, apparent power and power factor
• Auto/Manual ranging • Frequency counter
• 40 segment analog bar graph
• 2-1/4" Jaw opening
• Meets IEC-1010 Category III 600V Safety Standards

Specification

Volts DC Ranges 400mV, 4V, 40V, 400V, 600V Best Resolution 100µV Accuracy ±(0.5% Rgd + 3d) Maximum Input 1000V DC or 750V RMS Input Impedance 10MW Volts AC Ranges 4V, 40V, 400V, 600V Accuracy ±(0.5% Rdg + 5d) Maximum Input 750V RMS Input Impedance 10MW Resistance Ranges 400W , 4KW , 40KW , 400KW , 4MW , 40MW Best Resolution 0.1W Accuracy ±(1.5% + 5d) Maximum Input 250V DC or AC RMS DC/AC Current Ranges 400 and 1000 Amps Best Resolution 0.1A Accuracy ±(2.0% Rdg + 5d) Maximum Input 1000A DC or AC RMS Continuity Buzzer Buzzer Will sound at < 40W Frequency Ranges 100Hz, 1KHz, 10KHz, 100KHz, 1MHz Best Resolution 0.01Hz Accuracy ±(0.2% Rdg + 2d) Maximum Input 250V DC or AC RMS Power Measurement True Power Range 600KW Resolution 1W Accuracy ±(2% Rdg + 2d) Maximum Input 600V or 1000A, DC or AC RMS Power Measurement Apparent Power Range 600KVA Resolution 1VA Accuracy ±(2% Rdg + 2d) Maximum Input 600V or 1000A, DC or AC RMS Power Measurement Power Factor Range 0.03 to 1 Resolution 0.01 Accuracy ±(2% Rdg + 2d) Maximum Input 600V or 1000A DC or AC RMS General Specifications Operating Temperature 0 to 40°C @ relative humidity < 80% Power 9V battery Size 10.7" (H) × 3.4" (W) × 1.7" (D) Jaw Size 2.25" Weight 1.07 lbs Accessories Manual, Carrying case, Test leads, IR RS-232, Cable and Software, Line splitter (optional)

Sanwa PC5000A Digital Multimeter

Sanwa PC5000A Digital Multimeter

Product Information

•  MULTIMETER, DIGITAL
•  DMM Type: Hand Held
•  Voltage Measuring Range DC: 500mV to 1kV
•  Voltage Measuring Range AC: 500mV to 1kV
•  Resistance Measuring range 500ohm to 50Mohm
•  Frequency Measuring Range: 5Hz to 200kHz
•  Capacitance Measuring Range: 50nF to 9.999mF
•  No. of Digits / Alpha: 6
•  DMM Response Type: True RMS
•  DMM Functions: AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Resistance
•  Ranging: Auto
•  Display Count: 500000
•  Current Range AC: 500µA to 10A
•  Current Range DC: 500µA to 10A
•  DC Voltage Range Accuracy1: 0.03%
•  Duty Cycle (%): 99%
•  Interface Type: RS232 (USB opt.)
•  Operating Current AC: 10A
•  Operating Current DC: 10A
•  Supply Voltage V DC: 9V
•  Voltage Rating V AC: 1000V
•  Voltage Rating V DC: 1000V
•  Weight: 430g

Sim900D Quad-band GSM/GPRS module

Sim900D Quad-band GSM/GPRS module

SIMCom presents an ultra compact and reliable wireless module-SIM900D. This is a complete Quad-band GSM/GPRS module in a SMT type and designed with a very powerful single-chip processor integrating AMR926EJ-S core, allowing you to benefit from small dimensions and cost-effective solutions. Furthermore, SIM900D can be compatible with SIM340DZ.

Featuring an industry-standard interface, the SIM900D delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. With a tiny configuration of 33mm x 33mm x 3 mm, SIM900D can fit almost all the space requirements in your M2M applications, especially for slim and compact demands of design.

General features 

* Quad-Band 850/ 900/ 1800/ 1900 MHz

* GPRS multi-slot class 10/8

* GPRS mobile station class B

* Compliant to GSM phase 2/2+

 – Class 4 (2 W @850/ 900 MHz)

 – Class 1 (1 W @ 1800/1900MHz)

* Dimensions: 33*33*3mm

* Weight: 6.2g

* Control via AT commands (GSM 07.07 ,07.05 and          SIMCOM enhanced AT Commands)

* SIM application toolkit

* Supply voltage range : 3.2 ... 4.8V 

* Low power consumption: 1.0mA(sleep mode)

* Operation temperature: -40 °C to +85°C

Dekko 1009/8p/6p Crimping tools

Dekko 1009/8p/6p Crimping tools

RJ-11/RJ-45 Crimping Tools for network/ telecomunication tools

Fairchild QRE00034 Reflective object sensor

Fairchild QRE00034 Reflective object sensor

Phototreflector suitable for robotic applications Line Follower
specifications:
- Continuos emitter forward current 50mA
- Emitter reverse voltage of 5V
- Vce Sensor (receiver): 5VDC
- Rise Time: 10us
- Fall Time: 50us
- Proximity sensor module with a surface: 4mm

5.8 GHz 24 dBi Hyperlink Dish Antenna, HG5824D

5.8 GHz 24 dBi Hyperlink Dish Antenna, HG5824D 

Product Description

The HyperGain® 5.8GHz High-Performance Parabolic Dish WiFi Antennas are ideal for directional 5.8GHz ISM / UNII band applications. It features 24 dBi gain with a 9° beam-width. This antenna can be oriented for either vertical or horizontal polarization.

Rugged and Weatherproof The reflector dish of these antennas are constructed from high quality aluminum which gives them superior strength. The dish is coated in a light gray UV-inhibited polymer for durability and aesthetics. The small diameter of the dish helps minimize wind loading. This antenna is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 60°. Radome Cover KitsHyperGain® Radome Covers are an ideal way to provide additional protection to our parabolic dish antennas. These light weight radome kits feature fiberglass construction and UV stable gray finish. Drain holes are provided on the radome cover to help prevent moisture build-up inside the dish antenna. These radome kits bolt directly to the dish antennas with the provided stainless steel hardware. Drilling mounting holes in the antenna is not required. The radome cover can be attached to existing antennas already mounted in the field or pre-assemble to the antenna before mounting.

Specifications

Model	HG5824D
Frequency	5725-5850 MHz
Gain	24 dBi
Polarization	Horizontal or Vertical
Horizontal Beam Width	9°
Vertical Beam Width	9°
Front to Back Ratio	30 dB
Impedance	50 Ohm
Max. Input Power	100 Watts
VSWR	< 1.5:1 avg.
Weight	6.6 lbs. (3 kg)
Diameter	17.2 in. (436.8 mm)
Mounting	1.2" (32 mm) to 2" (51 mm) dia. masts
Operating Temperature	-40° C to 85° C (-40° F to 185° F)
Lightning Protection	DC Short
Connector	N-Female
RoHS Compliant	Yes
Radome Cover Part Number	HGR-04

2.4 GHz 15 dBi Hyperlink Omni Directional Antenna , HG2415U-PRO 

Product Details

The HyperGain® HG2415U-PRO is a high gain omnidirectional base station WiFi antenna designed and optimized for the 2.4GHz ISM band. This antenna is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth® and other multipoint applications where long range and wide coverage is desired.

This antenna features an integral N-Female connector. The mounting system consists of a pair of steel brackets and 2.7 inch U-bolts, allowing installation on masts up to 2.0 inches in diameter.

specs

• frequency 2400-2500 MHz
• gain 15 dBi
• Horizontal wave width 360 °
• Vertical wave width 8 °
• impedance 50 Ohm
• polarization vertical
• Max. energy input 100 Watts
• weight 1.5 Kg
• Dimensions / Diameter 1.03M x 38.6 mm

800 MHz to 3.0 GHz Super Broadband 3.5 dBi Hyperlink Ceiling Mount Antenna, HG-2404CU-NF

800 MHz to 3.0 GHz Super Broadband 3.5 dBi Hyperlink Ceiling Mount Antenna, HG-2404CU-NF 

Product Details
The HyperGain Model HG2404CU is a high performance broadband/multi-band ceiling mount WiFi antenna designed to operate from 800 MHz to 3 GHz. The Multi-Band design of this antenna eliminates the need to purchase different antennas for each frequency.

Applications

• IEEE 802.11b, 802.11g, 802.16 and 802.20 access points and routers
• IEEE 802.11n (Pre-N, Draft-N, MIMO) Applications
• 900MHz ISM Band & 900MHz cellular applications
• PCS cellular radio applications & GSM, RFID
• 1.2 GHz Wireless Video Links, Security Cameras, Video Transmitters and Security Systems

Altelicon Lightning Protector 90V Gas Tube 0-3GHz AL-NMNFB-9 

Product Details
* Reliable Performance from DC ~ 3 GHz
* Bi-Directional Protection
* Protector will pass DC
* Easily Replaced Gas Tube Element
* Multi-Strike Capability

* IEEE 802.11b and 802.11g Wireless LAN applications
* ISM
* MMDS
* Cellular applications
* PCS applications

Lightning Protector Model AL-NMNFB-9 is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. This unit features a N-Male to N-Female Bulkhead connector with a rubber O-ring seal for mounting through an enclosure wall or with the included aluminum mounting bracket.

Due to its low cost and superior RF performance, this unit is ideal for IEEE 802.11b and 802.11g Wireless LAN applications, as well as ISM, MMDS, Cellular, and PCS applications. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit' s replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding.

Altelicon Lightning Protector 0-6GHz AL6-NMNFB-9

Altelicon Lightning Protector 0-6GHz AL6-NMNFB-9 

Produk Details
* Reliable Performance from DC ~ 6 GHz
* Bi-Directional Protection / Protector will pass DC
* High Quality Construction
* Easily Replaced Gas Tube Element
* Multi-Strike Capability

The AL6-NFNFBW-9 is a very high-performance gas discharge tube suppressor featuring wide-band operation up to 6 GHz. The unit features a bulkhead N-Female connector with a rubber " O " -ring seal for mounting through an enclosure wall or using the included stainless steel mounting bracket.

Due to its superior RF performance this unit is ideal for IEEE 802.11a and other 5.2 - 5.8 GHz ISM and UNII applications, as well as 3.5 GHz WLL applications. Since this protector will pass DC it is suitable for applications where DC is carried through the coax cable such as remote amplifiers and LNA' s.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit' s replaceable gas tube element, multi-strike capability and fast response time make it suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding.

This unit features a bulkhead N-Female connector with a rubber " O " Ring seal for mounting through an enclosure wall. An optional stainless steel mounting bracket, HGX-LPMOUNT01 is also available.

3-Way Spliter/Coupler 2,4 Ghz N-Female Connector, Hypergain SC2403N

 3-Way Spliter/Coupler 2,4 Ghz N-Female Connector, Hypergain SC2403N 

Compatible with 802.11b and 802.11g Wireless LAN WiFi applications

* Industrial grade, Cast aluminum construction

* Weatherproof for indoor or outdoor use

* DC power will pass to all ports

* RoHS Compliant

HyperGain® 2.4 GHz Signal Splitters / Signal Combiners are used for connecting more than one antenna to a single radio. They feature weather-proof construction and can be installed indoors or outdoors. This 3-way splitter can be used with amplified systems since they will pass DC power to all ports. HyperGain® 2.4GHz WLAN Signal Splitters / Combiners are also available in 2-way and 4-way models with N-Female, RP-TNC Jack and SMA connectors.

Note:

To ensure proper operation, any open splitter ports should be terminated with a high quality 50 Ohm terminator. We recommend the Hyperlink ANM-TERM1 0-6 GHz 50 Ohm N-Male Terminator.

4-Way Spliter/Coupler 2,4 Ghz N-Female Connector ,Hypergain SC2404N

 4-Way Spliter/Coupler 2,4 Ghz N-Female Connector ,Hypergain SC2404N 

* Compatible with 802.11b and 802.11g Wireless LAN WiFi applications
* Industrial grade, Cast aluminum construction
* Weatherproof for indoor or outdoor use
* DC power will pass to all ports
* RoHS Compliant

HyperGain® 2.4 GHz Signal Splitters / Signal Combiners are used for connecting more than one antenna to a single radio. They feature weather-proof construction and can be installed indoors or outdoors. This 4-way splitter can be used with amplified systems since they will pass DC power to all ports. HyperGain® 2.4GHz WLAN Signal Splitters / Combiners are also available in 2-way and 3-way models with N-Female, RP-TNC Jack and SMA connectors.

Note:
To ensure proper operation, any open splitter ports should be terminated with a high quality 50 Ohm terminator. We recommend the Hyperlink ANM-TERM1 0-6 GHz 50 Ohm N-Male Terminator.

2-Way Spliter/Coupler 2,4 Ghz N-Female Connector, Hypergain SC2402N

2-Way Spliter/Coupler 2,4 Ghz N-Female Connector, Hypergain SC2402N

Compatible with 802.11b and 802.11g Wireless LAN WiFi applications
* Industrial grade, Cast aluminum construction
* Weatherproof for indoor or outdoor use
* DC power will pass to all ports
* RoHS Compliant
HyperGain® 2.4 GHz Signal Splitters / Signal Combiners are used for connecting more than one antenna to a single radio. They feature weather-proof construction and can be installed indoors or outdoors. This 2-way splitter can be used with amplified systems since they will pass DC power to all ports. HyperGain® 2.4GHz WLAN Signal Splitters / Combiners are also available in 3-way and 4-way models with N-Female and RP-TNC Jack connectors.

Note:
To ensure proper operation, any open splitter ports should be terminated with a high quality 50 Ohm terminator. We recommend the Hyperlink ANM-TERM1 0-6 GHz 50 Ohm N-Male Terminator.

The SC2402N can be mounted to a wall or shelf using the optional HGX-AMOUNT02 mounting kit.

4 Watt 2.4 GHz Indoor 802.11b/g/n WiFi Amplifier (HA2404GTI-NF)

4 Watt 2.4 GHz Indoor 802.11b/g/n WiFi Amplifier (HA2404GTI-NF)

HyperLink GTI series are high power indoor RF amplifiers for 2.4 GHz spread spectrum wireless LANs. High power and excellent linearity make it the highest performance wireless LAN amplifiers available today. These WiFi amplifiers are compatible with 802.11b/g/n wireless LAN equipment. Hyperlink's APC (Active Power Control) circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length. Consisting of a receive amplifier and a transmit power amplifier, the GTI series installs indoors near the radio itself, combining ease of installation with significant improvement in operating range and performance.

The "GTI" series WiFi amplifiers increase range by providing transmit gain as well as 17 dB nominal of receive gain. This receive gain actually increases the receive sensitivity of most wireless LAN radios. This unit can be confiActive Power Control

N-Female Connectors

12VDC Power Supply Included

Note:

This Hyperlink bi-directional amplifier is designed for burst half-duplex operation. It is not intended for constant transmit or CW operation. Operation of the amplifier in CW mode will damage the amplifier and void the warranty. For additional information and complete specifications, click on data sheet link below.

Hamamatsu S6986 Light modulation photo IC

S6986 Photo IC for synchronous detection of an optical signal in the presence of backgound such as bright sunlight. Light sensor with built in pulse driver circuit and sync detector. Useful as a wide-angle proximity detector or for non-contact bump sensing.

The pulse driver modulates the output of an external LED (not included). The LED will illuminate the target with modulated light; reflected light in sync with the output is detected by the S6986, making detection relatively insensitive to ambient lighting.

Specifications

Package Plastic Package Feature clear Allowable Background Light Level 10000 lx Type Note Measurement Condition Typ. Ta=25 deg. C, unless otherwise noted

Bioloid GP Kit

Bioloid GP Kit is a humanoid robot kits that have been optimized for different types of robot competitions. Bioloid GP Kit is equipped with actuators which have high torque, communication devices, sensors, and frame of aluminum a sweat yet powerful. Bioloid GP Kit can be formed into a humanoid robot with 16 degrees of freedom (16 DOF). Bioloid GP Kit also comes with a gripper to pick up an object, Kung-Fu movement, attack, and dribble-purpose robot soccer competition.

Specifications: 

• Using the CM-510 controller ATmega2561 based. 
• Using actuators: 
•  -- 8 AX-12A with torque capacity up to 15 kgf.cm. 
•  --10 AX-18A with torque capacity up to 18 kgf.cm. 
• Equipped with gyro sensor (2 axis) and distance sensors DMS (Distance Measurement Sensor). 
• Equipped with remote controller RC-100Z consisting of remote controller RC-100 and ZIG-110 to control the robot wirelessly. 
• USB2Dynamixel that can be used to connect the CM-510 to a computer's USB port. 
• A set of polished aluminum frames are lightweight yet strong enough to build a robot body. 
• Equipped with 1 set of gripper for certain applications such as taking an object. 
• Humanoid robots can do Kung-Fu move, attack, or dribble. 
• Rechargeable batteries (11.1V Li-Po, 1000 mA / PCM) as the robot power supply. 
• SMPS (12V, 5A) for external power supply and battery charging. 
• Equipped with some tools like wrenches, screwdrivers, and a cable holder. 
• Balance battery charger to help the process of charging the battery. 
• Equipped with a suitcase made from aluminum, making it easier to keep robots and equipment. 
• Equipped RoboPlus software for robot programming. 
• The process is a serial programmer using the included serial cable. 
• Equipped with the Assembly Manual (Quick Start) to assemble Humanoid robot with 16 degrees of freedom (16 DOF). 
• Bioloid GP Kit height: 346 mm (13.6 inch). 
• Robot Weight: 1.6 kg (56.43 oz). 

Bioloid GP Supplies Kit: 

1. 1 Bioloid CM-510 MCU (Atmel ATMega128) controller. 
2. 8 Dynamixel AX-12A serially controlled servos. 
3. 10 Dynamixel AX-18A serially controlled servos. 
4. 1 gyro sensor (2 axis) GS-12. 
5. 1 sensor distance DMS (Distance Measuremnent Sensor). 
6. 1 remote controller RC-100z (RC-100 + 1 set ZIG-110). 
7. 1 LED holder. 
8. 1 Rechargeable Li-Po battery (11.1V/1000 mA). 
9. 1 CD software RoboPlus. 
10. 1 Switch Mode Power Supply (12V/5A) and balanced battery charger. 
11. 1 Serial cable BSC-10 (9pin D-type). 
12. 1 set of wires. 
13. 1 set of tools such as bolts, nuts, screws, rivet, and wrenches. 
14. 1 pcs rivet box. 
15. 1 Bioloid GP Aluminum Frame Set. 
16. Quick Start Manual. 
17. 1 suitcase made from aluminum.

other article: http://2r-he.blogspot.com/2011/04/bioloid-gp.html

Ollo Tool

Ollo Tool is a tool used to help open a rivet that has been mounted on the robot kits Ollo.

Ollo Power Switch OPS-10

Ollo Power Switch OPS-10 is a switch to connect the battery box with a box geared motors on robot kit Ollo. The installation process Ollo Power Switch OPS-10 can be done using the help rivet. Dimensions: 24 x 18 x 15mm.

OLLO IR Receiver OIR-10

Ollo IR Receiver OIR-10 is an infrared light receiver modules intended for use in conjunction with RC-100 remote control robotic production. Ollo IR Receiver OIR-10 fully compatible for use with the Ollo Bug Kit, Ollo Education Kits, as well as the CM-100 controller module.

specifications:

• Working voltage: 3.3VDC.
• Fully Compatible with: Ollo Bug Kit, Ollo Education Kits, CM-100 controller module.

OLLO Dual Bracket-S(W)

OLLO Dual Bracket-S(W) merupakan 1 set bracket untuk digunakan pada kit robot OLLO. Kit ini menyertakan 5 buah bracket.

OLLO Geared Motor OGM-10A

Ollo Geared Motor OGM-10A is one of the driving actuator for robot kit Ollo. Ollo Geared Motor OGM-10A is compatible for use with the CM-100 controller. The process of controlling the speed of rotation, the direction of motor rotation clockwise or anti clockwise can be controlled via the control port. For ease of use, Ollo Geared Motor OGM-10A can be used with Ollo Power Switch OPS-10 and Ollo Battery Box OBB-10A.

specifications:

• Working voltage: 1.5 - 3.0VDC.
• Comparisons gear: 60: 1.
• Rotation speed: 112rpm (@ 1.5V), 158rpm (@ 3.0V).
• Dimensions: 18mm x 36mm x 24mm.
• Fully compatible with: CM-100, Ollo Power Switch OPS-10, Ollo Battery Box OBB-10A.

OLLO IR Sensor OIS-10

Ollo IR Sensor OIS-10 is an infrared sensor module that can be used on a robot kit Ollo to perform object detection or color. The sensor is designed in compact dimensions and comes with an analog voltage interface that will facilitate the process of reading the data by the controller module. Ollo IR Sensor OIS-10 is not suitable for measuring the distance of an object.

specifications:

• Interface: Analog Voltage.
• Can be applied as detection of the presence of an object or the color of an object.
• Object color and the environment will affect the sensor output data.
• Working voltage: 3.3VDC.
• Dimensions: 24mm x 18mm x 12mm.
• Fully compatible with the controller: CM-100, CM-510.

OSM-10 Ollo Servo

OSM-10 Ollo Servo

• It is the motor used in OLLO; it is connected to CM-100, and the direction of spin and the speed of spin can be adjusted through port control.
• If it is set to "Spin Mode," it can be operated as the geared motor; if it is set to "Joint Mode," the motor can be moved to the designated location by setting the speed of spin(Power)and the value of location.
• It is mainly used to maintain certain angles pursuant to some conditions such as moving joints, moving steering devices, etc.

H/W Specification

• Weight : 16g
• Dimension : 18mm * 36mm * 27mm (with horn)
• Voltage : 3.0V
• Gear Ratio : 194:1
• Speed : 85 RPM(at 3.0V)
• Characteristics :
• • Location Sensor (POT)
  • Safety Device (Clutch) Installed

OTS-10 Ollo touch sensor

Ollo Touch Sensor OTS-10 is an add-on kit sensors are fully compatible for use with the Ollo robot kit. This kit can be used to detect objects of physical contact with the sensor, making it suitable applied for bumper robot that can detect collision. Ollo Touch Sensor OTS-10 is compatible for use with the controller CM-100, CM-510, CM-530 and CM-700.

Hozan S-37 professional tool set

Hozan S-37 professional tool set

 

Details table (kit contents: 17 pieces) Alignment Tools D-29-150 Phillips Screwdriver No.0 D-140-100 Phillips Screwdriver No.2 D-155-100 Slotted Screwdriver 2.5 D-230-100 Slotted Screwdriver 4.0 D-240-100 Nut Driver 5.5 mm D-850-5.5 Soldering Iron with Cap H-250 File (Hand) K-172 Diagonal Cutter N-4-125 Desolder Braid No.3738 Long Nose Pliers　with Side Cutter P-15-150 Lineman’s Pliers P-43-150 Tweezers P-87 Adjustable Wrench W-210-150 Measure Tape Z-341 Solder Utility Knife

Hozan S-30 professional tool set

Hozan S-30professional tool set

Details table (kit contents: 21 pieces)

Alignment Tools	D-29-150
Phillips Screwdriver No.0	D-140-100
Phillips Screwdriver No.1	D-150-100
Phillips Screwdriver No.2	D-155-100
Slotted Screwdriver 2.5	D-230-100
Slotted Screwdriver 4.0	D-240-100
Slotted Screwdriver 5.0	D-250-100
Nut Driver 5.5mm	D-850-5.5
Nut Driver 7mm	D-850-7
Soldering Iron with Booster	H-600
Solder	H-700
Diagonal Cutter with Stripper	N-9-150
Desolder Braid	No.3738
Long Nose Pliers with Side Cutter	P-15-150
Tweezers	P-87
Slip Joint Pliers	P-211Z-150
Adjustable Wrench	W-210-150
Utility Knife
Electrical Tape
File Hand
File Round

Hozan S-22 professional tool set

Hozan S-22 professional tool set

Details table (kit contents: 20 pieces)

Alignment Tools	D-29-150
Phillips Screwdriver No.0	D-140-100
Phillips Screwdriver No.2
Slotted Screwdriver 2.5	D-230-150
Slotted Screwdriver 4.0	D-240-100
Nut Driver 5.5 mm	D-850-5.5
Tip Cleaning Tray	H-8
Solder	H-700
Solder Aid Tool Kit (Knife and Scraper)	H-740-2
Solder Aid Tool Kit (Brush and Fork)	H-740-3
Soldering Iron	H-869
Diagonal Cutter with Stripper	N-9-150
Long Nose Pliers with Side Cutter	P-15-150
Lineman’s Pliers	P-43-150
Tweezers	P-86-125
Adjustable Wrench	W-210-150
Measure Tape	Z-341
Heat Sink
File Hand
Ditto Round

Hozan S-10 professional tool set

Hozan S-10 professional tool set 

Details table (kit contents: 20 pieces)

Alignment Tools	D-29-150
Phillips Screwdriver No.0	D-140-100
Phillips Screwdriver No.2
Slotted Screwdriver 2.5	D-230-150
Slotted Screwdriver 4.0	D-240-100
Slotted Screwdriver 5.0	D-250-100
Nut Driver 5.5mm	D-850-5.5
Nut Driver 7mm	D-850-7
Solder	H-700
Soldering Iron	H-869
Diagonal Cutter with Stripper	N-9-150
Desolder Braid	No.3738
Long Nose Pliers with Side Cutter	P-15-150
Tweezers	P-87
Slip Joint Pliers	P-211Z-150
Adjustable Wrench	W-210-150
Utility Knife
Electrical Tape
File Hand
File Round