I2C ADDA Ver 2

I / O module that provides Digital to Analog or Analog to Digital conversion. PCF8591 based which has 4 8-bit ADC channels and 1 8-bit DAC channel.

Specifications:
- Data supply: 5VDC
- PCF8591 based
- 4 channels 8-bit ADC and 1 channel 8-bit DAC
- I2C interface (can be combined up to 8 devices on same bus line)
- Compatible with DT-51 Minimum System
- Can also be connected with AVR, PIC or other microcontrollers.

Terminal Block 12 pin Strip

Terminal block of 12 pin strip with lock type using nut.

• Terminal block terminal type
• Shape (female / male) Female
• Number of pins 12 pins (24 holes)
• Mounting Free-hanging

Shock Sensor 801S

This component is a sensitive vibrating sensor.
The features include:
- Able to detect micro vibration.
- Has a relatively long lifetime (60 million times the vibration).and others.

datasheet https://goo.gl/meMtJy

PWDW01 Plastic Wheel for Mini Metal Gear Motor

Wheels for the purpose of robots made of plastic material. This wheel has an outer diameter of +/- 6.5 cm and diameter of the middle hole as a liaison with DC motor shaft in the form of letter D.

Terminal block 3 pin without wall

PCB Terminal Block without wall

• Jenis terminal Terminal block
• Pitch 7,62
• Jumlah pin 3 Pin
• Mounting PCB

Led Green Super Flux Water Clear 3mm

LED super green flux.100mA

• 3.2VDC power supply
• Green light color
• Water Clear lens color
• Angular beam angle 30 deg
• Brightness 9000 mcd (typ)

datasheet https://goo.gl/iBC4g3

H28 16 bit Analog-to-digital chip

The IC H28 is a 16 bit ADC (Analog to Digital Converter), which uses a delta-sigma conversion technique.

This IC is specially designed for low power consumption, so it is ideal for use in systems that require battery life. Because of this, the H28 has also been equipped with standby function.

• Power supply 2V - 5V
• Interface 2 wire I2C
• 16-bit resolution
• The data conversion time is 32.2 ms - 2.5 ms
• Accuracy 5,1 - 19,7 (μV)

datasheet https://goo.gl/6th4pj

Camera Board 8Mpx for Raspberry Pi

RPI Camera V2 is a high quality camera module with IMX219 sensor from Sony that supports EXMOR R technology. This camera module uses fixed focus type lens and is capable of capturing images with a maximum resolution of 8 MP (3280 x 2464). In the video recording sector, this camera module is equipped with a capable ability. This module can perform Full resolution HD-resolution HD1080p @ 30 FPS, HD 720p @ 60 FPS, 480p @ 60/90 FPS. To connect it to Raspberry Pi is very easy, you just need to pair the flat cable on the camera module to the CSI socket on Raspberry Pi.

Specification:

- Sensor: Sony IMX219

- Dimensions: 25 mm x 23 mm x 9 mm

- Camera Resolution: 8 MP

- Image Resolution: 3280 x 2464

- Video Resolution: Full-HD1080p @ 30 FPS, HD 720p @ 60 FPS, 480p @ 60/90 FPS

- Features: EXMOR R for better image capture in low light conditions

Microwave radar sensor module

RCWL-05 sensor-based microwave sensor module equipped with Doppler Radar Technology technology. This sensor works by detecting microwave waves resulting from the movement of the human body. Suitable for security system, home automation system, etc.

Specification:

- Working Voltage: 4 - 28 meters

- Current consumption: 3 mA

- Detection distance: 5 - 9 meters (7 meters optimal distance)

- Power Transmission: 20 mW

- Output Drive: 100 mA

- Output Signal: 3.3 V

datasheet https://goo.gl/PPgjaH

Funduino Soil Moisture Sensor for Arduino

A measuring sensor with sensistifitas soil moisture levels high. The output signals from the sensors in the form of analog voltage that ranges from 0 - 2.3 VDC, which can be directly connected to the analog input pin microcontroller. With this sensor, you can make the soil quality gauges, automatic plant watering system, etc.

Specifications:

- Material: RF4 

- Power Supply: 3.3 V or 5 V 

- Consumption Current: <20 div="" ma="" nbsp="">

- Output Voltage: 0 - 2.3 V (2.3 V when the sensor is submerged in water) 

- Type Output: Analog output 

- Dimensions: 120.0 x 78.0 x 10.0 mm

2 position dip switch

DIP switch SPST 2 position.

• Number of pins 4
• Dimensions 6 mm (P) x 10 mm (L) x 4 mm (T)
• Configure Slide On
• Type DIP Switch
• Logic On Off

Capacitor 15PF 50V 0805T 10 pcs per pack

SMD capacitor with a value of 15pf capacitance, maximum working voltage 50 volts DC having dimensions of 2.00 mm x 1.3mm

• Capacitance 15 pF
• Voltage 50 V
• 5% Tolerance

Capacitor 5PF 50V 0805T 10 pcs per pack

SMD capacitor with 5pf capacitance value, maximum working voltage 50 volts DC having dimension 2.00 mm x 1.3mm

• Capacitance 5 pF
• Voltage 50 V
• 5% Tolerance

Capacitor 12PF 50V NPO 0805 10 pcs per pack

SMD capacitor with 12pf capacitance value, maximum working voltage 50 volt DC having dimension 2.00 mm x 1.3mm

• 12 pF capacitance
• Voltage 50 V
• 5% Tolerance

PI-DESKTOP

PI-DESKTOP is the revolutionary accessories kit for the Raspberry Pi that can change the Raspberry Pi 2/3 you become a desktop PC in general. The kit comes converter module to lay the SSD (Solid State Disk) through mSATA connector, so that the Raspberry Pi storage can be expanded up to 1 terabytes. 

This kit is also equipped with RTC (Real Time Clock) in order to keep time on a Raspberry Pi configuration remains appropriate and updated despite Raspberry power supply to be disconnected. 

PI-DESKTOP comes with a stylish case design and futuristic. This case makes it easy to access the ethernet port, HDMI, USB, power, and audio jacks. Case also comes Tobol power to turn on, turn off, or restart the device Raspberry Pi.

Note: Raspberry Pi, SSDs, and power supply are not included in the sales package.

Antenna pack for ED20 Tracker Board

Antenna pack for ED20 Tracker Board. This antenna pack consists of 3 antennas with different shapes, but both use UFL connector. (IPX)

GM420024-SY DC Gear Motor, 12V, 1:24, 2 channel magnetic encoder

GM420024-SY DC Gear Motor, 12V, 1:24, 2 channel magnetic encoder

DC motor with 2 magnetic encoder channels of 38 poles of magnet per round suitable for robotics applications.

Datasheet https://goo.gl/uRvNGN

Terminal block 3 pin modular without wall pitch 6.35mm

Terminal block 3 pin modular without wall pitch 6.35mm
Terminal Block Modular terminal type

• 6.35mm Pitch
• Pin number 3 Pin
• Mounting PCB
• Plastic packaging materials

ED20 Tracker Board, GSM GPRS GNSS BT3.0 IOT

ED20 Board Tracker is a location tracking module all-in-one that has been integrated with a wide selection of wireless communication. This module-based chipset which provides connections Quectel MC20 GSM, GPRS, Bluetooth, and GNSS in a single chip. 

ED20 works on frequencies GSM / GPRS 850/900/1800/1900 MHz class 12, supports the function of GPS / Beidou with accuracy up to 10 meters, and supports Bluetooth 3.0. It is suitable for the application of IOT-based object tracking.

Specifications:

- Chipset: Quectel MC20 

- Connectivity: GSM / GPRS, GNSS, Bluetooth 3.0 

- Frequency GSM / GPRS: 850/900/1800/1900 MHz class 12 

- Protocol: TCP / UDP / HTTP / FTP / PPP 

- GNSS: GPS / Beidou 

- Accuracy: 10 meters (with antenna) 

- Channel: 99 channel acquisition, 33 channe tracking 

- Power supply: 4.2 V (via VBAT), 5V (via USB port) 

- interfaces: UART, PCM, SIM2 interface, SD card interface, ADC 

- The type of SIM: SIM Nano 

- Dimensions: 48 x 39 mm

Tactile Switch Small 4 pin 4.5mm

4 pin through hole SPST tactile switch

• number of pins 4
• dimension 6mm x 6mm x 4.5mm (WxLxH)
• Configuration tactile switch
• Type push on
• Logic ON / OFF

Mini JST 3P Charger Balance JST XH Connector Adapter Plug + Cable

Mini JST 3P Charger Balance JST XH Connector Adapter Plug + Cable
a set of mini JST male & female 3 pin connectors with 15 cm long cable.

• Mini JST terminal type
• Shape (female / male) Male and Female
• Pin number 3 Pin
• Mounting angel Free-hanging

C0805C106K8PACTU 10µF 10V SMD Multilayer Ceramic Capacitor

SMD Multilayer Ceramic Capacitor 10μF 10V 0805 ± 10% (C0805C106K8PACTU)
Multilayer SMD capacitor with 10 μF capacitance and maximum working voltage of 10 V. This capacitor is packed in 0805 pack.

• Capacitance of 10 μF
• Voltage 10 V
• Tolerance of 10%

datasheet https://goo.gl/rsYs6L

Goot 60 watt solder element

Goot solder element with 220 VAC working voltage and 60 watt power.

LT1167AIS8PBF oamp chip

LT1167AIS8PBF is an Op-Amp IC with 1 MHz bandwidth gain and maximum working voltage of 20 V. Suitable for application on bridge amplifier, thermocouple amplifier, strain gauge amplifier, etc.

• Power supply 20 V (max)
• SOIC-8 packaging
• Input offset voltage 40 μV (max)
• Input bias current 350 pA
• Gain bandwidth 1 MHZ

datasheet https://goo.gl/2J1PkE

T40P-194BO-HS4 Black/Orange BaneBots Wheel

BaneBots Wheel, 1-7 / 8 "x 0.4", 1/2 "Hex Mount, 40A, Black / Orange T40P-194BO-HS4

Rubber wheels for applications in the field of robotics with a diameter of 1-7 / 8 ", width 0.4", and type hub hex mount 1/2 ".

Specification:

- Outside Diameter: 1-7 / 8 in

- Width: 0.4 in

- Mount: 1/2 in hex

- Color: Black and orange

T40P-195BA-HS4 Black/Blue BaneBots Wheel

BaneBots Wheel, 1-7 / 8 "x 0.4", 1/2 "Hex Mount, 50A, Black / Blue T40P-195BA-HS4

Rubber wheels for applications in the field of robotics with a diameter of 1-7 / 8 ", width 0.4", and type hub hex mount 1/2 ".

Specification:

- Outside Diameter: 1-7 / 8 in

- Width: 0.4 in

- Mount: 1/2 in hex

- Color: Black and blue

IRF3415 mosfet

IRF3415 is an N-channel MOSFET with 150V drain-source breakdown voltage and 43 A drain current.

• TO-220-3 packaging
• N-Channel Polarity
• Power dissipation 200 W
• Drain source breakdown voltage 150 V
• Gate-source voltage 20 V
• Continuous drain current 43 A

U2D2 USB Communication Converter

U2D2 is a USB converter device that serves as a bridge to connect and control Dynamixel servo to PC / laptop. U2D2 can be connected to laptop / PC by using micro USB cable. U2D2 supports both TTL and RS-485 interfaces as a communication path to various Dynamixel servo-servo variants. In addition U2D2 also supports UART interface as a communication path to OpenCM9.04, CM-150 and CM-200.

U2D2 can be used to configure & test servo conditions, firmware upgrade and recovery, servo ID replacement, and various other functions.

datasheet https://goo.gl/uezrck

AT59C11 chip

4-Wire Serial EEPROM

• 5 VDC power supply
• 8-pin DIP packaging
• 4-wire interface
• Capacity 128 bytes
• Time of reading / writing of data 10 ms

datasheet https://goo.gl/uCRU1H

DS1921G-F5 1-wire thermo sensor

Sensor for digital thermometer with an accuracy of ± 1 ° C from -30 ° C - + 70 ° C which has 1 wire interface.
https://datasheets.maximintegrated.com/en/ds/DS1921G.pdf

Tin Sucker Dekko DS 4

Dekko tin deconger with length 235 mm and diameter of tube / valve 26 mm.

P8751BH micro chip

8-bit microcontroller MCS-51 family oriented control.

• 40-pin DIP packaging
• 12MHz working frequency (max)
• Working voltage of 5VDC
• Number of i / o 32
• 8051 Architecture
• Memory size of 4k Byte program
• 128 byte volatile data memory size
• Timer / counter Timer / Counter 16-bit
• UART peripheral interface

datasheet: https://docs.google.com/open?id=0BzkNNhuEnaF-aHlxdDJfczBPM00

TD62004AP chip 16-DIP

TD62004AP chip 16-DIP 7-channel Darlington Sink Driver
datasheet http://www.toshiba.com/taec/components2/Datasheet_Sync//393/7032.pdf

DS3231MZ+TRL

IC RTC with I²C interface in NSOIC-8 pin packaging. It has been integrated with MEMS (MicroElectroMechanical Systems).

Features:
- Full function for calendar, hour (second, minute, hour, day, date, month and year).
- Accuracy timekeeping ± 5 ppm (± 0.432 sec / day) with working temperature -45 ° C to 85 ° C.
- Output 1 Hz and 32,768 kHz.
- Power supply: 2.3V - 5.5V.

http://www.farnell.com/datasheets/2001796.pdf?_ga=1.59084260.898254825.1447042516

74HC74A SOIC-14 chip

Dual D-type Flip-Flops (with Preset and Clear)

• 2 -6 VDC power supply
• 14-lead SOIC packaging
• Function D Flip-flop with preset and clear
• Propagation delay 150 ns
• Level of voltage i / o TTl

SD Card memory 8 GB V-GEN

SD card V-GEN brand with a memory capacity of 8 GB. This memory is included in the class 6 SD card, which is capable of reading data at a maximum speed of 25 MB / s and capable of writing data with a maximum speed of 12.3 MB / s.
It is suitable when used as a storage medium for digital cameras.

Specification:
- Type: SD card
- Capacity: 8 GB
- Class: Class 6
- Read Speed: 25 MB / s
- Write Speed: 12.3 MB / s
- Dimensions: 32 x 24 mm

Dekko multimeter probe

Dekko multimeter probe with cable length 120 cm.

Stanley Digital Voltage Tester

Stanley Digital Voltage Tester

is a portable voltage measuring device with 2 methods of measurement, contact and contactless. This means that this device can be used to measure voltage by touching the probe to a voltage source directly (contact) or can also be used to measure the voltage without touching the source of voltage directly (contactless).

To display the reading result, the LCD graph has been provided 0.75 ".The device is compatible for 12 - 220V voltage range either AC or DC.

DS2422S chip

DS2422S chips are temperature sensors in which there are real time clock (RTC), memory, serial interface for ADC, dataloggers, and 1-Wire interface.

datasheet https://datasheets.maximintegrated.com/en/ds/DS2422.pdf

AD7663AST

16 bit CMOS ADC

Specification:
- Sampling rate of 250 kSPS
- 16 bit resolution
- Parallel Interface (8/16 Bits) and Serial 5V / 3V
- Supply 5V
- Package LQFP-48

LM2904N chip

Dual Operational Amplifier.

• Power supply 3V - 26V (or ± 1.5V - 13V)
• Output current 30 mA (Typ I source) and 15 mA (Typus I sink)
• Package DIP-8
• Input offset voltage (max) 0.7mV
• Input bias current max) 250nA
• Gain bandwidth 100dB

datasheet http://www.ti.com/lit/ds/symlink/lm358.pdf

AT24C512B-PU-1.8 chip

Serial EEPROM

• 1.8VDC power supply - 3.6VDC
• 8-pin DIP packaging
• I2C interface
• Capacity 64 Kbytes
• Time of reading / writing data 5 ms (write cycles)

datasheet http://atmel.com/dyn/resources/prod_documents/doc5297.pdf

182K OHM 0.25W 1% (10 pcs per pack)

Resistor with 182K ohm resistance

• Tolerance of 1%
• Obstacles 182K ohm
• Power 0.25 W

MAX153CPP chip

High speed 8 bit ADC with 1uA Power-Down

Specification:
- Single power supply + 5V or Dual ± 5V
- Supply current 8mA
- External voltage reference
- Conversion Time 0.66 us Max.
- 8 bit resolution
- 1MHz max bandwidth
- 1 analog input channel
- Operating range 0 - 70 degree celcius
- Package 20-pin Narrow PDIP

datasheet http://www.mouser.com/ds/2/256/MAX153-101958.pdf