LED Strip on PCB Warm White 110~130° - (STR2-16WO4-130)

LED strip with a working voltage of 12 V which consists of 16 pieces of LED. These LED strips emit warm white colored light with a brightness level of light up to 65 lumens. LED strip is very suitable when enabled as a source of room lighting, decoration, automotive accessories, and so forth.

Specification:

- Voltage: 12 VDC

- Current: 150 mA

- Number of LEDs: 16

- Color: Warm white

- Brightness: 65 lm

125KHz RFID Reader SL101 with keyboard

SL101 is an RFID reader that works at 125 KHz frequency and supports EM4100 protocol tag readings. In use is also quite easy because the RFID reader is plug and play. Simply connect this reader to the computer through the PS / 2 port that has been available, then in an instant reader is ready for you to use.

• 5 V power supply
• Features Equipped keyboard
• Dimensions 160 × 93 × 38 mm
• Working frequency is 125 KHz
• PS / 2 interface
• Distance of 1-5cm
• Format EM4100 card

Resistor 5 Ohm 1W 5% SMD 2515

Wirewound resistor with 5 ohm resistance, 1 watt power, and 5% tolerance.

• Packaging 2512 SMD
• 5% Tolerance
• 5 ohm resistance
• Power 1 W

HS-NM5500A TCP/IP & Ethernet Module

HS-NM5500A is a TCP / IP & ethernet module based on the Wiznet W5500 chip that will allow you to develop embedded system devices. This module allows users to provide Internet access to their embedded systems via IP / TCP stack, MAC ethernet 10/100, and PHY provided by the module. The presence of the Wiznet W5500 chip is very impact on performance, the article provides 32 Kb memory capacity to optimize ethernet data buffer processing, equipped Serial Peripheral Interface interface (SPI) for high-speed data communication, and able to work at a maximum clock speed of up to 80 MHz.

Specification:

- Works at voltage level 3.3 V (5V tolerance for I / O pins)

- Supports TCP / IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE

- Supports the use of 8 independent sockets simultaneously

- Supports Wake on LAN (WoL) feature

- Supports high speed SPI communications

- Equipped with TX / RX 32 Kb buffer memory

- 10/100 Mbps Ethernet

- Supports Auto Negotiation feature

CS90N-W Portable Plastic case , White

TAKACHI versatile plastic box made from high quality ABS plastic.

TAKACHI is a Japanese manufacturer as well as specialist in manufacturing of enclosures for the needs of industrial devices that offer a variety of enclosures of various types of shapes and high quality materials for custom industrial projects.


For other dimensions and details, match the following Part Code with the datasheet provided.

Part Code: CS90N-W


Datasheet

CS90-B Plastic Small Case with CR2032x1 Battery Compartement

Small plastic plastic box TAKACHI made from high quality ABS plastic. Suitable for handheld custom tools. Also equipped with 1x CR2032 battery and silicon cover.

TAKACHI is a Japanese manufacturer as well as specialist in manufacturing of enclosures for the needs of industrial devices that offer a variety of enclosures of various types of shapes and high quality materials for custom industrial projects.


For other dimensions and details, match the following Part Code with the datasheet provided.

Part Code: CSS90-CL-BC

CS90-W Plastic Small Case with CR2032x1 Battery Compartement

Small plastic plastic box TAKACHI made from high quality ABS plastic. Suitable for handheld custom tools. Also equipped with 1x CR2032 battery and silicon cover.

TAKACHI is a Japanese manufacturer as well as specialist in manufacturing of enclosures for the needs of industrial devices that offer a variety of enclosures of various types of shapes and high quality materials for custom industrial projects.


For other dimensions and details, match the following Part Code with the datasheet provided.

Part Code: CSS90-OP-WG

PCB for CS90

PCB for CS90 is a proto-board made of Glass Epoxy (FR-4) that provides 277 holes for the development of your project prototype. This proto-board has dimensions of 83.9 x 38.9 x 1 mm and the distance between holes of 2.54 mm.

Specification:

- Dimensions: 83.9 x 38.9 x 1 mm

- Number of Holes: 277

- Pitch: 2.54 mm

- Weight: 7.8 gr

L50J1K0E Resistor Snubber 1K 50W 5%

L50J1K0E is a snubber with a resistance value of 1 KOhm and 5% tolerance. This resistor can work at a maximum power of 50 watts and voltage 1625 V. This resistor is usually applied to the field of industry and automotive.

• 5% Tolerance
• Obstacles 1 K
• Power 50 W

Multilayer Ceramic Capacitors MLCC - SMD/SMT 50V 5.6pF C0G 0805 (08055A5R6CAT2A)

Multi-layer ceramic capacitor with 5.6 pF capacitance, maximum 50 V, and packed in 0805 SMD pack.

• 
  
• Capacitance 5.6 pF
• Voltage 50 V

DZ2J068M0L (Zener 6.8V, 200mW, SOD-323F)

DZ2J068M0L is a zener diode with a voltage of 6.8 V and a power of 200 mW.

• Packaging SOD-323
• Voltage 6.8 V
• Power 200 mW

Led Strip SMD 3528 Warm White DC 12V

LED strip with a length of 5 meters and a working voltage of 12 VDC. This LED Strip can emit warm white color light with brightness up to 350 lm, so it is ideal if used as a source of room lighting and decoration. In addition, this LED strip has also protected PVC material so that it is resistant to water (waterproof).

Specification:

- Working Voltage: 12 VDC

- Amount of LED: 120 LED / meter

- IP Rating: IP68

- Color: Warm white

- Length: 5 Meters

- Brightness level: 350 lm

Led white super bright water clear 3mm

Is an LED with 3 mm lens diameter. This LED can emit bright white light with a maximum brightness level of 8000 mcd. It is suitable when applied as lighting, decoration, electronics circuit indicators and so forth.

• 20 mA current
• Power supply 3.5 - 4 V
• White light color
• Water Clear lens color
• 3 mm lens diameter
• InGaN basic materials
• Brightness 8000 mcd

LM75 Temperature Sensor Module

LM75 Temperature Sensor Module is an LM75-based temperature sensor module designed to be compatible with mini PC Banana Pi or Arduino microcontroller. This module provides a type I²C peripheral interface. In this module also has an 11-bit internal ADC resolution capable of providing accuracy up to 0.125 ° C. This module is perfect when applied to industrial control systems, environmental monitoring, smart-home, interactive tools, and so forth.

Specification:

- Working Voltage: 2.8 - 5.5 V

- Temperature Range: -55 ° C - 125 ° C

- Interface: I²C

- ADC: 11-bit

- Resolution: 0.125 ° C

- Compatibility: Banana Pi, Raspberry Pi, Arduino, and other devices that support I²C communications

Bluetooth SMD Module - RN-42-HID

RN-42-HID is a bluetooth v2.0 module designed with a simple design and has supported Enhanced Data Rate (EDR) technology. The technology allows this module to transmit and receive data at a maximum speed of 3 Mbps at distances up to 20 meters.

In addition, RN-42-HID also supports data communication to the microcontroller and HID devices through UART and USB interface.

• 3.3 V power supply
• 2.4 GHz working frequency
• UART interface, USB
• Bluetooth class 2.0
• Distance of 20 meters (max)

UHF Adhesive paper tag (EPC GEN2)

Passive RFID tags designed with a paper-like form. This RFID tag works in the frequency range 860 - 960 MHz and uses the protocol type ISO18000-6C. On the back of this tag has also provided adhesive that will allow you to attach this tag to an object.

• The working frequency is 860 - 960 MHz
• Reading distance 3 - 8 meters (depending on reader)
• Format ISO18000-6C, EPC Class1 Gen2
• Data (64-bit / etc) 96-bit EPC memory

on-metal tag Gas cylinder

RFID tags designed for materials made from metal. This RFID tag works, at a frequency of 860 - 960 MHz using the ISO18000-6C protocol. This RFID tag also meets IP68 standards, so this tag is resistant to dust and immersion in the liquid (waterproof).

• The working frequency is 860 - 960 MHz
• Distance of reading 2 - 7 meters
• Format ISO18000-6C, EPC Class1 Gen2
• Data (64-bit / etc) 96-bit EPC memory

4.7uF / 10V Tantalum Capacitor

Capacitor tantalum with capacitance value 4.7 μF and maximum voltage 10 V.

• 4.7 μF capacitance
• Voltage 10 V

Terminal block pluggable 12 pin Male

12-pin block (male) terminal with 3.5mm pitch and throug hole mount type.

• Terminal type Terminal block
• Male (male / female) form
• 3.5 mm pitch
• Number of pins is 12 pins
• Mounting Throug hole
• Copper Alloy contact material
• Flow 12 A
• Polymide + GF packaging materials

CR2032 coin cell 20mm battery holder

Is a battery holder for CR2032 lithium battery with a diameter of 20 mm. More dimensions can be seen in the picture

• Battery holder terminal type
• Shape (female / male) Female
• Phosphor Bronze contact material

Led Yellow Super Bright Diffused 10mm

LED with 10 mm lens diameter capable of emitting bright yellow light. This LED has a diffused lens color with a brightness level of light reaches 800 mcd. This LED is perfect when used as lighting, decoration, automotive accessories, and so forth.

• 20 mA current
• 2.6 V power supply
• Yellow light color
• Diffused lens color
• 10 mm lens diameter
• The basic ingredients of AlGaInP
• Brightness 800 mcd

replacement battery for DSO Nano Ver.2

Replacement battery for mini osciloscope DSO Nano V2. This battery is made by using a single cell lithium ion technology, so it is able to produce a voltage of 3.7 V with an optimal capacity of 500 mAh. This battery is perfect for replacing the batteries in your worn Nano v2 DSO or can also function as a backup battery.

• Voltage 3.7 V
• Rechargable Yes
• Capacity 500 mAh
• Lithium-ion battery type

MC33342DG chip

MC33342DG is a controller IC for fast charging circuit in Nickel Cadium (NiCd) and Nickel Metal Hydride (NiMH) batteries. This IC supports the programming of charging constraints of power supply (between 1 - 4 hours) as well as programming the limit of over / under temperature detection. In addition, in terms of security IC is also equipped with over / under voltage protection feature to protect the battery from damage.

Specification:

- Battery Compatibility: NiCD, NiMH

- Working Voltage: 3.25 - 18 V

- Packaging: SOIC-8

- Mounting Type: SMD / SMT

HYX031-P6 DC Gear Motor 5V, 1:120, 98rpm, (1:120)

HYX031-P6 is a DC motor that has been equipped with a gearbox ratio of 1: 120. This motor operates at a working voltage of 3 - 6 V with a torque output of 3-6 kg-cm. This motor is capable of producing rotation speed up to 98 rpm. It is suitable for robotic applications.

• Working voltage 3 - 6 V
• Consumption of no-load current -
• Current consumption 70 - 560 mA
• Maximum torque is 6 kg-cm
• Maximum rotation speed is 98 rpm
• Shape shape & size -
• Dimensions without shafts 27 x 44 mm
• Gear box Yes
• 1: 120 gear box comparison

CS75N-B Portable Plastic case, Small, Black

CS75N-B is an electronic case made of black ABS plastic material. This case has dimensions of 35 x 75 x 12 mm. It is suitable if used as a case for portable electronic devices, such as GPS tracker, USB stick, infrared remote, RFID tags, and so forth.

DIN 2X2 ISOEM U2U8-P1-O5O8 (dual isolated converter 0-10V, 0-200mV to 0-10V, 0-200mV)

DIN 2X2 ISOEM U2U8-P1-O5O8 is a two-channel converter module that works to convert analog or current voltage from sensor and PLC into desired output voltage / current. This module provides 2 conversion channels which each have different voltage and current I / O range. To work, this module requires a power supply of 24 VDC. This module is perfect for industrial applications.

Specification:

- Power Supply: 24 VDC

- Channel Count: 2

- Input Voltage: 0 - 10 V (CH1), 0 - 10 V (CH2)

- Output Voltage: Custom (CH1), custom (CH2)

- Accuracy: 0.1 - 0.5%

- Moisture: 10 - 90%

- Insulation resistance: 20 MOhm

Music Shield for Arduino

Music Shield is an Arduino compatible module that you can use to play music from micro SD. This module uses the VS1053B IC as its audio decoder, which IC can be used to decode audio files with MP3, WAV, MIDI, and Ogg Vorbis extensions. In addition, this module has also provided a library that will allow you to develop Arduino-based projects using this module.

Features:

- Using 5 VDC power supply

- Supports micro SD storage up to 2 GB capacity

- Compatible with Arduino / Seeeduino, Arduino Mega, and Seeeduino Mega

- Equipped with 2 push-push buttons and a knob switch

- Supports MP3, WAV, MIDI, and Ogg Vorbis audio formats

- Equipped I2S interface for external DAC

- Equipped 3.5 mm audio jack as audio output line

- The sound quality is amazing with the frequency response ± 1dB

- Meet FFC standards

S1A-272008 Case 2.75" x 2.0" x 0.8" White

Is an electronic case made of white ABS plastic with dimensions of 2.7 x 2.0 x 0.8 inches. It is suitable when used as a protector of electronics from collision, dirt and dust.

Specification:

- Dimensions: 2.7 x 2.0 x 0.8 inches

- Material: ABS Plastics

- White color

Http://www.mouser.com/ds/2/290/272008_r2_1-13777.pdf

EEprom chip 24C32CN-SH-T

24C32CN-SH-T is an EEPROM memory that provides a capacity of 32 Kb and clock-speed of 1 MHz. 24C32CN-SH-T uses a 2-wire interface for data communication and takes about 5 ms to do data writing to memory. 24C32CN-SH-T can also be rewritten for up to 1 million times with a 100-year data storage period.

• Power supply 1.8 - 5.5 V
• 8-SOIC packaging
• I²C interface
• Capacity 32 Kb
• Time of reading / writing data 5 ms

AD5612 to DIP Breakout

AD5612 to DIP Breakout V1.0 is a 10-bit Digital-to-Analog-Converter (DAC) module that works on a voltage range of 2.7 - 5.5 V and a minimum current of 100 uA. AD5612 uses I²C communication lines to transmit DAC conversion data at speeds of 100 KHz - 3400 KHz. In this device also has provided a breakout board that can facilitate you in applying this device on the project board. AD5612 you can use as a portable DAC converter, data acquisition device, battery-powered device, attenuator device, and so on

• Power supply 2.7 - 5.5 V
• Packaging -
• I²C interface
• 10-bit Resolution
• Number of channels 1
• Data conversion time -
• Accuracy of 0.5 LSB

TZM5231B-GS08 Zener 5.1V, 500mW, SOD-80

It is a zener diode with a voltage of 5.1 V and a power of 500 mW. Zener diode is widely used in general electronics applications such as power supply devices, amplifier devices, audio video devices, and so forth.

• SOD-80 packaging
• Voltage 5.1 V
• Power 500 mW
• Input Impedance -
• Leakage of backflow 5 uA

Aoyue WQ-02J Sodering iron tip

WQ-02J SOLDERING IRON TIP W / HEATING ELEMENT is a high quality solder tip from AOYUE that has been equipped heater-cartridge heater. WQ-02J has a length of 124 mm with a diameter of 5.5 mm. WQ-02J is compatible with AOYUE-made solder range.

Sparkfun MP3 Player Shield arduino compatible

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.

The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.

This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the Arduino R3 Stackable Header Kit.

Features:

• 3.5mm audio out jack
• 0.1" spaced header for speaker out
• microSD card slot

ISO EM U2 - P1 - O5 - T (isolated converter 0-10V to 0-10V, 24VDC)

ISO EM U2 - P1 - O5 - T is an isolated DC-DC converter that uses the Magneto Electric method in the process of isolating the voltage. This device works to convert input voltage 0 - 10 V into output voltage 0 - 10 V at 24 DC power supply. This device also has a pin that serves as zero regulator, gain, and full-scale calibration on the converter.

• Input power supply is 0 - 10 V @ 24 VDC
• Efficiency -
• Output power supply 0 - 10 V
• Input current -
• Switching 1 KHz @ -3 dB

MGR560PG Reed Switch 10-15AT 0.5A 100VDC

It is a magnetic switch (reed switch) that will be triggered when there is a magnetic force nearby. This magnetic switch is capable of draining a maximum voltage of 100 VDC with a current of 500 mA. This switch is perfect when used on security systems, sensory devices, automation devices, and so forth.

• Number of pins 2
• Normally Clcosed (NC) Configuration
• Type Reed Switch
• On - Off Logic