MS6900 MOISTURE TESTER

 MS6900 MOISTURE TESTER

Features:

• Moisture Measurement from 0% to 90%
• Ambient Temperature and Relative Humidity Measurement
• Data Hold and Display Back Light

Specification
Measurement Depth	0~ 50mm
Object Moisture	0~ 90% ±1%
Ambient Temperature ℃	-10℃~ 50℃ ±0.5℃
Ambient Temperature ℉	14℉~ 122℉±1℉
Ambient Humidity	0~ 100%RH ±4%
Resolution	0.1%, 0.1℃, 0.1℉, 0.1%RH
MAX/MIN measurement mode
℃ / ℉ Selection
Low battery indication
Display Backlight
Data Hold

MS6860D SOCKET TESTER

MS6860D SOCKET TESTER

Features:

• Voltage Range: 100V~ 230V
• LED indicating conditions of circuit socket:

      Correct

      Missing earth

      Live-earth reverse

      Live-neutral reverse

      Missing neutral

MS6818 ADVANCED WIRE TRACKER

MS6818 ADVANCED WIRE TRACKER

Features:

• Find the open or shorts of cables in the wall or earth
• Track cables in the wall or earth
• Find the fuse and safeguard
• Find the open or shorts of conduit under the floor
• Track the conduit made by metal in the project of ware or hot
• Sensitivity of receiver can be selected
• Flashlight function

Specification

Find the open or shorts of cables in the wall or earth

Track cables in the wall or earth

Find the fuse and safeguard

Find the open or shorts of conduit under the floor

Track the conduit made by metal in the project of ware or hot

Sensitivity of receiver can be selected

Flashlight function

MS6813 MULTI-FUNCTIONS CABLE TRACKER

MS6813 MULTI-FUNCTIONS CABLE TRACKER

Features:

• Testing Coaxial Cable (BNC)
• Testing 10Base-T, T568A, T568B, Token Ring
• Testing cables’ shield integrity
• Judge continuity of the cables or wires
• Track the cables or wires, and diagnose the break point
• Receive the tone signal on the cables or wires (telephone line)
• Identify the state in the working telephone line (clear, ringing, busy)
• Send a single solid or a dual alternating tone to the target cables or wires.
• Send tone frequency: 1.5kHz
• Receive frequency: 100Hz~ 300kHz

Specification

Testing Coaxial Cable (BNC)

Testing 10Base-T, T568A, T568B, Token Ring

Testing cables’ shield integrity

Judge continuity of the cables or wires

Track the cables or wires, and diagnose the break point

Receive the tone signal on the cables or wires (telephone line)

Identify the state in the working telephone line (clear, ringing, busy)

Send a single solid or a dual alternating tone to the target cables or wires.

Send tone frequency: 1.5kHz

Receive frequency: 100Hz~ 300kHz

MS6812 CABLE TRACKER.

MS6812 CABLE TRACKER.

Specification

• Judge continuity of the cables or wires
• Track the cables or wires, and diagnose the break point
• Receive the tone signal on the cables or wires (telephone line)
• Identify the state in the working telephone line (clear, ringing, busy)
• Send a single solid or a dual alternating tone to the target cables or wires.
• Send tone frequency: 1.5kHz
• Receive frequency: 100Hz~ 300kHz

Features:

• Network tester: consists of a tone generator and a probe
• Method: use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
• Signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
• Tone generator output (square waveform): single (1500Hz) or dual (1300 - 1500Hz)
• Comes with: soft carrying bag

ALN-9654 G Inlay

Powered by Alien  ’s break-through Higgs™3 UHF RFID IC and innovative antenna design, the ALN-9654 delivers industry leading EPC Gen 2 performance and reliability. ALN-9654 inlays are  World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and  Africa. 

The Alien Technology ALN-9654 “G” is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers 

Designed for use on glass, plastics, wood, or other challenging insulator materials  Optimized for high performance in all world regions.

With its Higgs-3 core, the “G” delivers ultra-high, “best-of-breed” performance. It is especially well-suited for challenging materials with high-dielectrics, such as plastic and glass (hence the “G” nickname). The “G” inlay comprises a rich feature set including a 32-bit TID, a 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modifi cation of the tag’s  data.

FEATURE:

• Exceptional performance for high-dielectric mounting

• Multiple frequency optimized sensitivity

• EPC Gen 2 (v1.2.0) compliant 

• ISO/IEC 18000-6C compliant

• Worldwide RFID UHF operation (840-960MHz)

• Higgs™-3 IC with 800-bits of Nonvolatile Memory

– 32-bit TID 

– 64-bit Unique TID

– 96-bit EPC Memory, extensible to 480-bits

– 512-bit User Memory 

– 32-bit Access password

– 32-bit Kill password 

• Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication)

• User Memory can be Block Perma-Locked

• User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password

• Supports all Mandatory and Optional Gen 2 commands including item level commands

• Custom commands for high speed programming

• Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes

Applications :
• Windshield glass 

• Asset management
• Reusable plastic pallets 

• High speed motocross
• Totes and containers 

• Triathlon tagging

Specs:

Wet Inlay                                                                                  

• Inlay Width 3.799” [96.5mm] 
• Inlay Length 0.913” [23.2mm] 
• Web Width 3.925” [99.7mm] 
• Web Pitch 1.0” [25.4mm] 
• Core Width 3.874” [98.4mm] 
• Core ID 6” [152.4mm]* 
• Core Material Fiberboard 
• Inlays per Roll 12,500 Nominal 
• Maximum Roll OD < 16” [406.4mm] 
• Roll Labeling Data Roll #, Quantity 
• White TT Printable White Film Only 
• Overlay Adhesive General Purpose Permanent 
• Inlay Adhesive General Purpose Permanent 
• Adhesive Application Temperature > +25ºF [-4ºC] 
• Adhesive Service -40ºF to +200ºF 
• Temperature [-40ºC to +93.3ºC] 

MS6612 Digital Light Meter

MS6612 Digital Light Meter

Features:

• Large Range up to 200000Lux
• Large LCD Display with Back Light and Bar Graph
• Auto Power Off
• MAX/MIN and Data Hold

Specification
Measurement range:	0~ 200000Lux / 0~ 20000FC
Accuracy:	±3%
Resolution:	0.01Lux / 0.01FC
Display:	2000 counts
Analog bar indication
Auto range & manual range
Auto power off
MAX/MIN function
Relative measurement
Peak measurement
FC/Lux unit selection
Data Hold
Display Backlight
Low Battery Display

MS6550A Non-Contact K-Type Infrared Thermometer

MS6550A Non-Contact K-Type Infrared Thermometer

Features:

• Distance to Spot 50:1
• Built-In Laser Pointer to Target Spot
• Large Temperature Range
• 0.01 to 1.00 adjustable emissivity increases measurement accuracy for different surface
• 0.1°F/°C max resolution
• Type-K Thermocouple Temperature Contact Temperature Measurement
• USB Interface

Specifications	MS6550A
Infrared Temperature Range	-32℃~1200℃ -25℉~2192℉
Infrared Temperature Accuracy	>510℃	±1.5%
	50℃~510℃	±(1.5%+1℃)
	15℃~50℃	±(1.5%+2℃)
	-32℃~15℃	±3℃
Temperature Resolution	±0.1℃ / ±0.1℉
Repeatability	±0.5℃ or ±0.5%
Distance to Spot (D : S)	50 : 1
℃ / ℉ Selection	√
Emissivity	Digitally adjustable from 0.10 to 1.00 by 0.01
Response Time	500ms
Laser pointer	√
Data Logging	100 groups
Reading Hold	√
MAX, MIN,DIF,AVG	√
Display Backlight	√
Temperature Alarm Setting	√
Low Battery Display	√
K-type Temperature Range	-40℃~1370℃ -40℉~2498℉
K-type Temperature Accuracy	±(1.5%+1℃)
USB Interface (Windows OS)	√

MS6540A Non-Contact Infrared Thermometer

MS6540A Non-Contact Infrared Thermometer

Features:

• Distance to Spot 30:1
• Built-In Laser Pointer to Target Spot
• Large Temperature Range
• 0.01 to 1.00 adjustable emissivity increases measurement accuracy for different surface
• 0.1°F/°C max resolution
• Data Logging and Back Light

Specifications	MS6540A
Temperature Range	-32℃~850℃ -25℉~1562℉
Temperature Accuracy	>510℃	±1.5%
	50℃~510℃	±(1.5%+1℃)
	15℃~50℃	±(1.5%+2℃)
	-32℃~15℃	±3℃
Temperature Resolution	±0.1℃ / ±0.1℉
Repeatability	±0.5℃ or ±0.5%
Distance to Spot (D : S)	30 : 1
℃ / ℉ Selection	√
Emissivity	Digitally adjustable from 0.10 to 1.00 by 0.01
Response Time	500ms
Laser target pointer	√
Data Logging	100 groups
Reading Hold	√
MAX, MIN,DIF,AVG	√
Temperature Alarm Setting	√
Display Backlight	√
Low Battery Display	√