Friday, July 31, 2015

Robot Magazine print edition

Robot Magazine Print Edition

Robot Magazine July / August 2015 edition . In this edition there is a review of:
- Robotis Mini
- Tetrix robotics camp
- Trinity college competition
- A variety of other interesting reviews about the world of robotics and electronics.

Robot magazine November / December 2014  edition . In this edition there is a review of:
- Home robot, Aldebaran Pepper
- Intel's "Jimmy" Humanoid
- Robot cars
- Hydrogen cell power robot
- A variety of other interesting reviews about the world of robotics and electronics.

Robot Magazine September / October 2014 edition . In this edition there is a review of:
- Honda Asimo Robot
- Controlling automatic car
- A variety of other interesting reviews about the world of robotics and electronics.

Robot Magazine  July / August 2014 edition . In this edition there is a review of:
- Robot Femisapien
- Video game bots
- Parallax bot activity
- A variety of other interesting reviews about the world of robotics and electronics.

Robot magazine  May / June 2014 edition . In this edition there is a review of:
- Multirotor aerial video tips
- Robot for agriculture
- Robot contest
- A variety of other interesting reviews about the world of robotics and electronics.

Robot magazine March / April 2014 edition  In this edition there is a review of:
- The space station
- Free robot contest
- How to make roboboat
- Technology Transformers Bot
- A variety of other interesting reviews about the world of robotics and electronics.

Robot magazine  January / February 2014 edition In this edition there is a review of:
- Medical robot
- Humanoid robot
- A variety of other interesting reviews about the world of robotics and electronics.

OpenCM 485 Expansion Board

An expansion board for the controller OpenCM9.04-A / B. This board can be used for the Dynamixel servo and robotic sensors that have an interface of TTL and RS-485.

specifications:
- Power supply input: 5-30 VDC
- Power: SMPS, LIPO, DXL PRO 24V
- Supports connection servo motor / sensor with 3-pin connector (TTL) and 4 pin (RS-485).
- Dimensions: 68 x 66.5 x 16 mm

Raspberry Pi Model B+ with 8GB Micro SD Card Bundle

Raspberry Pi model B + is the development of a model raspberry B. The added features in this module is to have 4 USB ports, 40 GPIO (IO functions more), and the use of Micro SD card as the storage medium OS, data, etc.
Apart from the differences mentioned features, the operation of the module Raspberry Pi model B + is identical with the Raspberry Pi model of B.

specifications:
- Power supply: 5 VDC, 600 mA (via micro USB)
- Based microcontroller / microprocessor: ARM1176JZF-S core, 700 MHz
- Number of I / O ports: 40 pin GPIO
- Port interface: TTL UART, SPI, I2C, USB, Composite RCA, 3.5 mm jack, 10/100 Ethernet (RJ45), LCD Panels via DSI, CSI (Camera Serial Interface), HDMI
- Bootloader: melalaui Linux-based OS
- Features: Memory 512 MB, 4 USB PORT, Graphics Broadcom VideoCore IV, Micro SD Card Slot
- Dimensions: 85.60mm (L) x 56mm (W) x 17mm (H)
- Package sales: Raspberry Pi Model B + 512MB, 8GB microSD Card Pre Loaded with noobs + SD Card Adapter to Micro SD Card, MicroSD

Tuesday, July 28, 2015

SLU-M7020 Anti-Metal UHF Tag 

SLU-M Series (Anti-Metal UHF Tag)
SLU-M series of anti-metal UHF tags is developed based on UHF RFID technology, which supports ISO18000-6C/EPC Gen2 protocol and can offer much longer range of detection than HF card. It features anti-metal character and can be used in the metal environment.

ModelSLU-M Series
Frequency840-960MHz
ProtocolISO18000-6C, EPC Class1 Gen2
EEPROM SizeEPC 128bits, User 512bits
Outer materialFR4
Protection LevelIP65
Operating ModePassive
Temperature-25°C ~ +85°C

Dimension (mm)
SLU-M9525SLU-M7020SLU-M3613SLU-M2208
95×25×3.770×20×3.736×13×322×8×3

SLU-M3613 Anti-Metal UHF Tag

SLU-M Series (Anti-Metal UHF Tag)
SLU-M series of anti-metal UHF tags is developed based on UHF RFID technology, which supports ISO18000-6C/EPC Gen2 protocol and can offer much longer range of detection than HF card. It features anti-metal character and can be used in the metal environment.


ModelSLU-M Series
Frequency840-960MHz
ProtocolISO18000-6C, EPC Class1 Gen2
EEPROM SizeEPC 128bits, User 512bits
Outer materialFR4
Protection LevelIP65
Operating ModePassive
Temperature-25°C ~ +85°C

Dimension (mm)
SLU-M9525SLU-M7020SLU-M3613SLU-M2208
95×25×3.770×20×3.736×13×322×8×3

SLU-M2208 Anti-Metal UHF Tag

SLU-M Series (Anti-Metal UHF Tag)
SLU-M series of anti-metal UHF tags is developed based on UHF RFID technology, which supports ISO18000-6C/EPC Gen2 protocol and can offer much longer range of detection than HF card. It features anti-metal character and can be used in the metal environment.

ModelSLU-M Series
Frequency840-960MHz
ProtocolISO18000-6C, EPC Class1 Gen2
EEPROM SizeEPC 128bits, User 512bits
Outer materialFR4
Protection LevelIP65
Operating ModePassive
Temperature-25°C ~ +85°C

Dimension (mm)
SLU-M9525SLU-M7020SLU-M3613SLU-M2208
95×25×3.770×20×3.736×13×322×8×3

RFID X007 Mifare Multimedia for Time Attendance & Access Control

Mifare RFID Multimedia for attendance and access control system with the ability to store data 30,000 RFID cards and 100,000 records that are standalone, SDK Supplied in the package to the needs of development. Display using TFT LCD touchscreen, while equipped with various features such as USB backups, TCP / IP and RS232 / RS485 for data communication purposes with other devices.

Meanwell SD-100d-24

Meanwell SD-100d-24

Specifications
  • Max. output 100 W
  • Output type Single
  • Output description 24V,0-4.2A
  • Power supply type DC/DC converter
  • Enclosure type Enclosed Type
  • RoHS Compliant
  • Suitable for medical No
  • Dimmable No
Input
Input rangePhase(s)
72 - 144 VAC 1

Output
VoltageCurrent
24 V 0 - 4 A






Monday, July 27, 2015

HEXBUG InchWorm

One product output HEXBUG robot shaped 4-legged insects.
In the purchase package already includes a remote control (IR) 2 channel.
Made in some very attractive colors (green, red, indigo, orange and pink)

Saturday, July 25, 2015

Lynxmotion HQuad500 Drone (Base Combo Kit)



The Lynxmotion HQuad500 Drone (Base Combo Kit) is a 500mm quadcopter built using the new Lynxmotion M.E.S. (MultiRotor Erector Set) system. The design uses our new aluminum clamps along with 16mm carbon fiber tubes. This combination of parts allows the frame to be:
  • Incredibly rigid (minimal flexing)
  • Versatile (Integrated mounting for upgrades)
  • Lightweight (use of composites and Aluminum)
  • Modular (change the frame / use different length tubes)
  • HQuad500 Frame and mounting hardware
  • Includes brushless motors, speed controller and propellers
  • "Plug and play" for easy solder-less assembly
  • Requires flight controller, battery, charger and remote (TX/RX)

The HQuad500 equipped with a camera plate up front which is removable. Different plates will be available as well as a stabilized gimbal system. The flight controller mounting is located at the "dead center" of the frame with slots accommodating 30.5mm to 45mm mounting. The frame is compatible with the Lynxmotion Quadrino Nano Flight Controller (not included) with a section designed for the GPS antenna and access to the underside ports. There are integrated mounting plates for the ESCs which allow for easy access.

Specs:
  • G10 plates / panels
  • Carbon fiber tubes
  • Aluminum brackets and standoffs
  • Motor to Motor: 500mm (492.29mm)
  • Propellers: 8" to 10"
  • Front Arm Angle: 150° (149.05°)
  • Assembled Weight: 383g (frame only)
  • Flight Controller Mount: Flat surface as well as 30.5mm to 45mm slots (direct compatible with the Quadrino Nano)
  • Mounting holes on the lower frame for use with a Lynxmotion pan/tilt and/or gripper

Whats included
  • HQuad500 (Base Combo Kit):
  • 1x HQuad500 Hardware Only Kit
  • All G10 (Fiberglass frame parts to build the HQuad500 frame
  • Complete Hardware Bag
  • 8x 16mm Aluminum Clamps (2 per pack)
  • 2x Lynxmotion battery strap
  • 4x Carbon Fiber tube (16x14x220mm)
  • 4x 28x30mm - 1000kv Brushless motor
  • 4x 12A Electronic Speed Controller (ESC) w/ SimonK Firmware
  • 1x 9" x 4.5" Black Multi-Rotor CCW Propeller Pair
  • 1x 9" x 4.5" Black Multi-Rotor CW Propeller Pair
  • 1x 9" x 4.5" Orange Multi-Rotor CCW Propropeller Pair
  • 1x 9" x 4.5" Orange Multi-Rotor CW Propeller Pair
  • 1x Power Wiring Harness
  • 1x Receiver to Flight Controller Wiring Harness

Requires (sold separately)
  • Flight Controller (Lynxmotion Quadrino Nano
  • Battery: 11.1V (3S), 20C (min) 2500mAh (min) ( 11.1v 3500mAh 30C Suggested  )
  • 5 channel (or more) remote control (UAV & Drone Remote Control )

Friday, July 24, 2015

HobbyKing ECO6 50W 5A Balancer/Charger

HobbyKing™ ECO6 50W 5A 8S Charger is capable of charging any capacity Lipoly battery up to 6 cells at 5A. It includes Auto current detect and temp, amp, voltage safety features to prevent over-charging. The ECO6 includes an array of charging plugs and wires to suit almost any application and comes with JST-XH balancing plugs so you can balance charge most packs easily.
Input power is 11-18v, so it can be powered by automotive batteries or a modified pc/laptop powersupply if you don't have a dedicated 12v power supply.

Features:
• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing
• Li-ion, LiPo and LiFe capable
• Ni-Cd and NiMH capable
• Large range of charge currents
• Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 5 packs in memory)
• Battery break in and cycling.

Specs:
  • Input Voltage: 11~18v
  • Circuit power: Max Charge: 50W / Max Discharge: 5W
  • Charge Current Range: 0.1~5.0A
  • Ni-MH/NiCd cells: 1~15
  • Li-ion/Poly cells: 1~6
  • Pb battery voltage: 2~20v
  • Weight: 170g
  • Dimensions: 138x75x23mm
  • Note: Requires external power supply.

ATTEN AT-H551C Handheld Oscilloscope

AT-H551C is unique all-in-one multifunction test instrument comprise of 50MHz Single Channel Oscilloscope, 6600 count high precision Digital Multimeter, Function Generator, 60MΩ LCR Meter and Frequency counter. It has a large 3.8”, 320 x 240 pixels LCD High Density Back-Lit Graphical display. Convenient and agile auto measure functions, with all measurement parameters adjustable.

In multimeter mode, both alternative current and voltage can be tested with one single probe input. No need to change probes. One single key-press can directly show the waveform of the signal. Capacitance measurement range up to 66000µF, and the measurement takes only a few seconds. Function signal output available, ranging from 10Hz to 156kHz. Real-time waveform is displayed simultaneously. Inter turn short-circuit test available. High frequency test designed for small inductance.

It’s a compact and hand held size with re-chargeable battery makes it your ideal companion for the ideal for on-field operation. Measuring and testing just became easier and more affordable than ever.

Features
• 50MHz digital storage oscilloscope.
• 6 ½  Auto-range digital multimeter.
• DDS function generator: 10Hz ~ 156 kHz
• Frequency/duty ratio test : 60MHz
• 156kHz auto-range inductance test
• Capacitance measurement range up to 66000μF
• 60MΩ resistance test (LCR)
• Remote control / crystal oscillator test
• 400 sets data storage
• USB interface & PC software
• In DSO mode, one key to switch auto-ranging measuring, automatically display the test waveform and automatically ZERO calibrating.
• Digital read out Vp-p, +Vp, -Vp, F, T, dV, dt and measuring parameters
• Storage/ readout over 40 DSO waveform and 200 groups of DMM data; automatically record 200 groups of data for detecting IC conveniently.
• Generate Sine Wave, Triangle Wave, Saw Tooth Wave and Square Wave, and match using the DSO simultaneously to found the test system.
• 200μS/400μS test square wave to detect the Ring signal generated by short circuit in Line output transformer
• 320 X 240 color liquid crystal display
• Built-in 2000mAh Ni-Hi charge battery, external matched power adapter
• USB interface 

Applications
• Industrial Power Design, Troubleshooting, Installation, and Maintenance.
• Electronics Design, Troubleshooting, Installation, and Maintenance
• Circuit Design & Debug
• Educational Lab & Training Institutions 
• Repair & Service
• Production Test & Quality Inspection

Feature of Digital storage DSO
Analog bandwidth
DC ~ 50MHz, probe: X10; DC~6MHz, probe X1 (3db bandwidth, sine wave response)
Max sampling rate
100Msps
Vertical resolution
8 bits
Channel
1
couple
DC/AC
Input impedance
1MΩ//20pF
Div
vertical ±4 div   horizontal 10 div
Vertical sensitivity range
20mV/div ~ 50V/div 1-2-5 exchanging step
Time base
10ns/div ~ 1s/div 1-2.5-5 switch
Vertical amplitude accuracy
±(5%+ 0.1div)
Time base accuracy
±(0.01% + 0.1div)
Auto-Zero calibrating
yes
Measuring mode
Normal, Video, Single
Trigger level
± 3.8 div (every step interval 0.04div)
Single slop of  selection
Rising edge/ Falling edge
Trigger condition
± 3.8div (every step interval 0.04div)
Auto setting
Auto setting time base and amplitude
Cursor measuring
dV, dt,
Auto measuring
Vp-p,+Vp,-Vp,f,T
Auto measuring accuracy
±(5%+ 0.1div)
Waveform
(sinx)/x

Feature of DSO probe
Position: X1
Input resistance 1MΩ : input capacitance  46pF   bandwidth   DC~10MHz    probe compensation ratio: 1:1    input voltage: 30Vp-p
Position: X10
Input resistance 10MΩ : input capacitance 15pF   bandwidth  DC~50MHz   probe compensation ratio: 10: 1   input voltage: 300Vp-p


Feature of DMM
Accuracy is indicated as:± (a% reading+ digit). It has One-year calibration. It is referred to the following environmental conditions: temperature: 23°C±5°C, <75 p="">

Function
Range
Resolution
Accuracy
DC voltage
600.0mV
0.1mV
±(0.8%rdg + 5dgt)
6.000V
1mV
60.00V
10mV
600.0V
100mV
2000V
1V
± (2.5%rdg + 10dgt)
AC voltage
600.0mV
0.1mV
50Hz~200Hz
±(1.0%rdg + 5dgt)
400Hz~20kHz  ±(3.0%rdg + 10dgt)   (not for over 20kHz)
6.000V
1mV
60.00V
10mV
600.0V
100mV
1000V
1V
± (2.5%rdg + 10dgt) (50Hz~400Hz)
DC current
60.00/600.0mA
10/100µA
±(1.0%rdg + 5dgt)
Adaptor ±(2.5%rdg + 5dgt)
10.00A
10mA
AC Current
60.00/600.0mA
10/100µA
±(1.5%rdg + 5dgt)  50Hz~5kHz
Adaptor  ±(2.5%rdg + 5dgt)
10.00A
10mA
Resistance
600.0W
0.1 Ω
±(1.0%rdg + 5dgt)
6.000kW
1 Ω
60.00kW
10 Ω
600.0kW
100 Ω
6.000MW
1kW
60.00MW
10kW
± (3.0%rdg + 5dgt)
Capacitance
6.600nF
1pF
± (3%rdg + 10dgt)
66.00 nF
10pF
660.0nF
100pF
6.600μF
1nF
66.00μF
10nF
660.0μF
100nF
± (5%rdg + 10dgt)
6.600MF
1μF
Only for reference
66.00MF
10μF
Inductance




10.00μH       0.1W*
100.0μH       0.2W
1mH          1W
10mH         20W
100mH        50W
1H            1kW
2H            1.5kW
0.01μH
0.1μH
1μH
10μH
100μH
1mH
10mH
± (5%rdg + 15dgt) please choose the proper measuring range, other wise, the measuring reading will be affected.
*: indicate inner resistance
Frequency
10.0Hz ~ 50.0MHz
50MHz~60MHz
0.1Hz ~ 10kHz
± (0.2%rdg + 5dgt),(no less than 500mV AC ) / ± (0.5%rdg + 5dgt),
Duty cycle
10~94.9% (AC1Vp-p)
Diode test
Open circuit voltage: 3.2V,Max test current: 1.5mA
Continuity test
if The resistance is <30 beeper="" buzzer="" p="" the="">
Auto ranging
Applied in every measuring range
Over range indicator
"O. L" (Over load)
Measuring rate
DMM A/D 2.5 S/s  waveform A/D 400kS/s
Fuse feature
Φ5×20,0.5A/250V   adapter Φ5×20,10A/250V

General Specifications
Display
320 ´ 240  LCD
Battery
Built-in1600mAh Ni-Hi battery
Low Battery indicator
 
Used time
Approx. 3 hours
Work condition
0°C~+40°C;<75 p="">
Dimension
200mm ´ 135 mm ´52mm
Operate height
0~2000m
Display area
78 mm x 58mm
Input impedance
DMM 10MΩ,
Auto power-off
No action within 10mins
Charging time
More than 8hours
Memory
DMM 400groups data and DSO 40 waveform record
Storage condition
-10°C ~ +60°C; <90 p="">
weight
Approx 1000g (Net weight)
Adaptor power
110V~250V,12V/1A, protection- switch power