Friday, August 19, 2011

AVR ATMEGA1280 CPU Module

ATMEGA1280 AVR CPU Module is a module-based single-chip microcontroller family of 8-bit AVR ATmega1280 with In-System Programming capability to assist the process of programming. ATmega1280 on the module is equipped with 4 channel USART and 16 channel ADC with a resolution of 10 bits. This module is compatible with the DT-COMBO Basic Base Board to develop simple to complex applications.

specifications:

  • Based ATmega1280 features:
  • 128 kbytes of flash memory.
  • 8 kbytes of RAM.
  • 4 kbytes EEPROM.
  • Interrupt vector 57.
  • 4 pieces Timer / Counter 16 bit and 2 Timer / Counter 8 bit.
  • Programmable Watchdog Timer.
  • 16 channel 10 bit ADC.
  • Real Time Counter.
  • 4 pieces of 8-bit PWM and 12 units with programmable PWM resolution (bits 2-16).
  • Crystal oscillator at 8 MHz.
  • Having a path Input / Output up to 86 pins.
  • The process of programming the In-System Programming via ISP 5x2 header with ATMEL standard housing.
  • Equipped with LED indicators for the process of programming the microcontroller.
  • Equipped with an interface:
  • 4 channel USART.
  • SPI interface can operate as master or slave.
  • Interface Two Wire Interface (TWI) with data transfer speeds up to 400 kHz.
  • Equipped with a chip EMI filter to reduce noise from the power supply.
  • Power supply 2.7 to 5.5 VDC and is equipped with a LED power indicator.
  • Compatible with DT-COMBO Basic Base Board and can be used with other modules by considering the pin configuration.
  • Equipped with software CodeVisionAVR (CVAVR) evaluation version that can be used to develop a program in C.
  • Dimensions: 6.3 cm (l) x 5.8 cm (w) x 1.8 cm (h).

AVR ATMEGA324 CPU Module

AVR ATMEGA324 CPU Module is a module for the AVR microcontroller family type AVR ATmega324 (P) A, which features the ISP Programming for charging program code and comes with a 2-channel USART interface. This module can be used independently or with the addition of DT-COMBO Basic Base Board which has provided a path I / O, interface and power supply, making it easier to explore the capabilities of this microcontroller.


specifications:

  • Based ATmega324 (P) A (32KB Flash Memory, 1 KB EEPROM, and 2 KB internal SRAM).
  • 2-channel Timer / Counter 8-bit.
  • 1 channel Timer / Counter 16-bit.
  • 6 channel PWM.
  • 8 channel 10-bit ADC.
  • Interface: 2x USART, SPI, I2C
  • Watchdog Timer and Analog Comparator
  • 32 channels of I / O
  • Cystal ocilator integrated with a frequency of 8 MHz.
  • Have an ISP port for charging the program code with the help of a programmer device, such as DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51.
  • Available power supply LED indicator and indicator programming.
  • Terintrgrasi with noise removal circuit on power supply lines.
  • Work on the 2.7 VDC voltage level - 5.5 VDC.
  • This module can be combined with the DT-BASIC COMBO BASE BOARD which will facilitate the use of this module.
  • Dimensions: 6.1 cm (l) x 5.75 cm (w) x 1.8 cm (h)

AVR ATMEGA328 CPU Module

AVR ATMEGA328 CPU Module is a module for the type of AVR microcontroller family which features the AVR ATmega328 ISP Programming for charging program code. This module can be used independently or with the addition of DT-COMBO Basic Base Board which has provided a path I / O, interface and power supply, making it easier to explore the capabilities of this microcontroller.

Specifications:

  • ATmega328-based (32KB Flash Memory, 1 KB EEPROM, and 2 KB internal SRAM).
  • 2-channel Timer / Counter 8-bit.
  • 1 channel Timer / Counter 16-bit.
  • 6 channel PWM.
  • 8 channel 10-bit ADC.
  • Interface: USART, SPI, I2C
  • Watchdog Timer and Analog Comparator
  • 22 channels of I / O
  • Cystal ocilator integrated with a frequency of 8 MHz.
  • Have an ISP port for charging the program code with the help of a programmer device, such as DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51.
  • Available power supply LED indicator and indicator programming.
  • PORB.7 PORTB.6 and can be used as an I / O bus or connected to a crystal oscillator on-board by setting jumper
  • Integrated with noise removal circuit on power supply lines.
  • Work on the 2.7 VDC voltage level - 5.5 VDC.
  • This module can be combined with the DT-BASIC COMBO BASE BOARD which will facilitate the use of this module.
  • Dimensions: 6.1 cm (l) x 5.75 cm (w) x 1.8 cm (h)

AVR AT90USB162 CPU Module

AT90USB162 AVR CPU module is a module for the AVR microcontroller family AT90USB162 AVR type that has been equipped with a USB controller and the bootloader via USB interface. This module can be used independently or with the addition of DT-COMBO Basic Base Board which has provided a path I / O, interface and power supply, making it easier to explore the capabilities of this microcontroller.

Specifications:

  • Based AT90USB162 (16KB Flash Memory, 512Byte EEPROM, 512 Bytes Internal SRAM &).
  • 1 channel Timer / Counter 8-bit (2 channel PWM) and 1 channel Timer / Counter 16-bit (3 channels PWM).
  • Interface: USART, SPI, USB Device.
  • Watchdog timer, analog comparator.
  • 22 channels of I / O.
  • Cystal ocilator integrated with a frequency of 8 MHz.
  • Programming can be via an ISP Port or a mini USB port (bootlaoder).
  • Programming via USB Port (bootloader) does not require additional programmers, such as DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51.
  • Using the FLIP program assistance in order to fill the PC side program code into the microcontroller through the USB port.
  • Programming via ISP Port using DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51 will erase the bootloader program in the microcontroller, so that the bootloader function can not be used.
  • Integrated with noise removal circuit on power supply lines.
  • Work on the 3.3 VDC voltage level - 5.5 VDC.
  • The power supply can be via Bus Power (USB) or from an external 5VDC power supply.
  • There is a jumper for selecting the source of the power supply and power supply levels.
  • PORTC.0 can be used as an I / O bus or connected to a crystal oscillator circuit via a jumper setting.
  • This module can be combined with the DT-BASIC COMBO BASE BOARD which will facilitate the use of this module.
  • Dimensions: 6.1 cm (l) x 5.75 cm (w) x 1.8 cm (h)

AVR ATMEGA32U4 CPU Module

ATMEGA32U4 AVR CPU module is a module for the AVR microcontroller family ATMEGA32U4 AVR type that has been equipped with a USB controller and the bootloader via USB interface. This module can be used independently or with the addition of DT-COMBO Basic Base Board which has provided a path I / O, interface and power supply, making it easier to explore the capabilities of this microcontroller.

specifications:
  • Based ATmega32U4 (32 KB Flash Memory, 1 KB of EEPROM and 2.5 KB Internal SRAM).
  • 2-channel Timer / Counter 8-bit, 2-channel Timer / Counter 16-bits and 1 channel high speed timer / counter 10-bit.
  • 4 channel 8-bit PWM, 4 PWM channels 2-16 and 6-bit high speed PWM channels 2-11 bits.
  • 12 channel 10-bit ADC.
  • 1 channel USART, SPI, I2C, JTAG, USB devices.
  • Watchdog timer, analog comparator.
  • 26 channels of I / O.
  • Cystal ocilator integrated with a frequency of 8 MHz.
  • Programming can be via an ISP Port or a mini USB port (bootlaoder).
  • Programming via USB Port (bootloader) does not require additional programmers, such as DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51.
  • Using the FLIP program assistance in order to fill the PC side program code into the microcontroller through the USB port.
  • Programming via ISP Port using DT-HiQ AVR In System Progammer, DT-HiQ AVR USB ISP or DT-HiQ AVR USB ISP-51 will erase the bootloader program in the microcontroller, so that the bootloader function can not be used.
  • Integrated with noise removal circuit on power supply lines.
  • Work on the 3.3 VDC voltage level - 5.5 VDC.
  • The power supply can be via Bus Power (USB) or from an external 5VDC power supply.
  • This module can be combined with the DT-BASIC COMBO BASE BOARD which will facilitate the use of this module.
  • Dimensions: 6.1 cm (l) x 5.75 cm (w) x 1.8 cm (h)

AT89S8253 CPU Module

AT89S8253 CPU Module is a module-based single-chip microcontroller family MCS-51 AT89S8253 with In-System Programming capability to assist the process of programming. AT89S8253 equipped with EEPROM memory of 2 kbytes. This module is compatible with the DT-COMBO Basic Base Board to develop simple to complex applications.

Specification :

  • AT89S8253-based features:
  • 12 kbytes of flash memory.
  • 256 bytes of RAM.
  • 2 kbytes EEPROM.
  • 9 resource interruptions.
  • 3 pieces of Timer / Counter 16 bit.
  • Dual Data Pointer.
  • Programmable Watchdog Timer.
  • Crystal oscillator at 11.0592 MHz.
  • Having a path Input / Output up to 32 pins.
  • The process of programming the In-System Programming via ISP 5x2 header with ATMEL standard housing.
  • UART serial interface is equipped with Automatic Address Recognition feature.
  • SPI interface can operate as a slave or master.
  • Equipped with a chip EMI filter to reduce noise from the power supply.
  • Power supply 2.7 to 5.5 VDC and is equipped with a LED power indicator.
  • Compatible with DT-COMBO Basic Base Board and can be used with other modules by considering the pin configuration.
  • Equipped with software BASCOM-8051 Demo version that can be used to develop programs with the BASIC language.
  • Dimensional modules DT-51 AT89S8253 CPU Module: 6.0 cm (p) x 5.3 cm (l) x 1.7 cm (t).

AT89C51AC3 CPU Module

AT89C51AC3 CPU Module is a module-based single-chip microcontroller family MCS-51 AT89C51AC3 that features 8 channels of ADC 10 bits and is compatible with the DT-COMBO Basic Base Board. AT89C51AC3 on this module has been equipped with the bootloader from Atmel (the default bootloader) so that the process of In-System Programming can be done directly via the UART without the aid of an external programmer device. DT-51 AT89C51AC3 can be used to develop simple to complex applications such as applications that use sensor device that has an analog voltage output.

 Specifications:

  • Based AT89C51AC3 with features:
  • 64 kbytes of flash memory.
  • 256 bytes of RAM.
  • 2 kbytes EEPROM.
  • Expanded RAM with capacity up to 2048 bytes that can be selected by software.
  • 6 clock / machine cycle in X2 mode.
  • 14 interrupt sources.
  • 3 pieces of Timer / Counter 16 bit.
  • Dual Data Pointer.
  • 8 channel ADC with a resolution of 10 bits.
  • 5 channel PCA (Programmable Counter Array) 16 bits which can be used as PWM.
  • Watchdog Timer.
  • Crystal oscillator at 11.0592 MHz.
  • Equipped with an internal bootloader from Atmel (the default bootloader) to assist the process of In-System Programming via the UART without an external programmer device.
  • Having a path Input / Output up to 34 pins.
  • Equipped with Full Duplex UART interface.
  • Process In-System Programmer uses the help of software FLIP (Flexible In-System Programmer) from ATMEL.
  • Equipped with PLCC socket so as to facilitate the replacement IC in the event of damage.
  • Equipped with tactile switches HWB to help programming using the bootloader.
  • Equipped with a chip EMI filter to minimize noise from the power supply.
  • Equipped with the ADC reference voltage circuit that generates a reference voltage +3 VDC.
  • Power supply 2.7 to 5.5 VDC and is equipped with a LED power indicator.
  • Compatible with DT-COMBO Basic Base Board and can be used with other modules by considering the pin configuration.
  • Equipped with software BASCOM-8051 version of the Demo and FLIP.
  • module dimensions : 6.0 cm (l) x 5.3 cm (w) x 1.7 cm (h).

AT89C51ID2 CPU Module

AT89C51ID2 CPU Module is a module-based single-chip microcontroller family MCS-51 AT89C51ID2 featuring I2C interface and is compatible with the DT-COMBO Basic Base Board. AT89C51ID2 on this module has been equipped with the bootloader from Atmel (the default bootloader) so that the process of In-System Programming can be done directly via the UART without the aid of an external programmer device. DT-51 AT89C51ID2 can be used to develop applications that are simple to complex.


Specifications:

  • Based AT89C51ID2 with features:
  • 64 kbytes of flash memory.
  • 256 bytes of Scratch Pad RAM.
  • 2 kbytes EEPROM.
  • Expanded RAM with a capacity of up to 1792 bytes that can be selected by software.
  • 6 clock / machine cycle in X2 mode.
  • 10 interrupt sources.
  • 3 pieces of Timer / Counter 16 bit.
  • Dual Data Pointer.
  • 5 channel PCA (Programmable Counter Array) 16 bits which can be used for PWM.
  • Watchdog Timer.
  • Crystal oscillator at 11.0592 MHz.
  • Equipped with an internal bootloader from Atmel (the default bootloader) to assist the process of In-System Programming via the UART without an external programmer device.
  • Having a path Input / Output up to 32 pins.
  • Equipped with an interface:
  • Full Duplex Enhanced UART with Dedicated Internal Baud Rate Generator.
  • SPI can serve as Master / Slave.
  • Two Wire Interface (TWI) with a data rate of up to 400 kbit / s.
  • Process In-System Programmer uses the help of software FLIP (Flexible In-System Programmer) from ATMEL.
  • Equipped with PLCC socket so as to facilitate the replacement IC in the event of damage.
  • Equipped with tactile switches HWB to help programming using the bootloader.
  • Equipped with a chip EMI filter to minimize noise from the power supply.
  • Power supply 2.7 to 5.5 VDC and is equipped with a LED power indicator.
  • Compatible with DT-COMBO Basic Base Board and can be used with other modules by considering the pin configuration.
  • Equipped with software BASCOM-8051 version of the Demo and FLIP.
  • Dimensions: 6.0 cm (p) x 5.3 cm (l) x 1.7 cm (t).

MB7066 XL-MaxSonar-WRL1

Distance measuring sensor module based on an object that can be used for ultrasonic distance measurement application objects in the water in accordance with IP67 standard. In addition, the sensor is equipped with features noise rejection, auto calibration, and 10m Detection Range Narrow Zone.

specifications:


  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • 3VDC work on the power supply - 5.5 VDC.
  • The results of reading data is automatically updated with the pause 100ms (10Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects within: 0-1068 cm and is able to measure the distance of objects in the range: 20-1068 cm
  • Resolution: 1 cm
  • Automatic calibration and real-time when exposed to noise
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Equipped with a packing funnel made ​​of PVC + PVC fittings 3 / 4 ".
  • Has water resistance in accordance with IP67 standard (endurance test in the water within 30 minutes at a depth of 1 m).
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 70.9 mm (P) x 43.8 mm (D)

MB7060 XL-MaxSonar-WR1

Distance measuring sensor module based on an object that can be used for ultrasonic distance measurement application objects in the water in accordance with IP67 standard. In addition, the sensor is equipped with features noise rejection, auto calibration, and Long-Range Narrow Detection Zone.

specifications:


  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 3.3 VDC - 5.5 VDC.
  • The results of reading data is automatically updated with the pause 100ms (10Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects within: 0-765 cm and is able to measure the distance of objects in range: 20-765 cm
  • Resolution: 1 cm
  • Automatic calibration and real-time when exposed to noise
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Equipped with a packing funnel made ​​of PVC + PVC fittings 3 / 4 ".
  • Has water resistance in accordance with IP67 standard (endurance test in the water within 30 minutes at a depth of 1 m).
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 70.9 mm (long) x 43.8 mm (wide)

MB1220 XL-MaxSonar-EZ2

Distance measuring sensor module an ultrasonic based object capable of measuring objects in a distance of 0-765 cm. MB1220-XL-EZ2 MaxSonar have a large transmit power, noise rejection, auto calibration and Long range detection medium zone (hardware gain of 1000).

specifications:

Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
Working on power supply 3.3 VDC - 5.5 VDC.
The results of reading data is automatically updated with the pause 100ms (10Hz).
Can be operated automatically in measuring the distance (free-run) or manually (triggered).
Able to detect objects within: 0-765 cm and is able to measure the distance of objects in range: 20-765 cm
Resolution: 1 cm
Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
Using 1 piece transducer is used as a transmitter and receiver.
Low power consumption, making it suitable for battery-based applications.
Can be connected with a variety of microcontrollers.
Dimensions: 19.9 mm x 22.1 mm x 25.11 mm

MB1200 XL-MaxSonar-EZ0

Distance measuring sensor module an ultrasonic based object capable of measuring objects in a distance of 0-765 cm. MB1200-MaxSonar XL-EZ0 has a large transmission power, noise rejection, auto calibration and Long range wide detection zone (hardware gain of 4000).

specifications:

  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 3.3 VDC - 5.5 VDC.
  • The results of reading data is automatically updated with the pause 100ms (10Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects within: 0-765 cm and is able to measure the distance of objects in range: 20-765 cm
  • Resolution: 1 cm
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 19.9 mm x 22.1 mm x 25.11 mm

LV-MaxSonar EZ3 Sonar Range Finder

Distance measuring sensor module an ultrasonic based object capable of measuring objects in a range 0 - 6.5 m. LV-MaxSonar EZ3 presents the perfect mix in the application side object rejection or applications that require a narrow angle jet

specifications:

  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 2.5 VDC - 5.5 VDC with a current consumption of 2mA.
  • The results of reading data is automatically updated with the pause 50ms (20Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects in: 0 - 6.5 m and is able to measure the distance of objects in range: 0.15 - 6.5 m
  • Resolution: 2.54 cm
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 19.9 mm x 22.1 mm x 15.5 mm

LV-MaxSonar EZ4 Sonar Range Finder

Distance measuring sensor module an ultrasonic based object capable of measuring objects in a range 0 - 6.5 m. LV-MaxSonar EZ4 has a narrow angle and transmit the most sensitive to objects that are in addition to

specifications:

  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 2.5 VDC - 5.5 VDC with a current consumption of 2mA.
  • The results of reading data is automatically updated with the pause 50ms (20Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects in: 0 - 6.5 m and is able to measure the distance of objects in range: 0.15 - 6.5 m
  • Resolution: 2.54 cm
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 19.9 mm x 22.1 mm x 15.5 mm

LV-MaxSonar EZ2 Sonar Range Finder

Distance measuring sensor module an ultrasonic based object capable of measuring objects in a range 0 - 6.5 m. LV-EZ2 MaxSonar presents the perfect mix between a high level with a side sesitivitas object rejection.

Specifications:
  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 2.5 VDC - 5.5 VDC with a current consumption of 2mA.
  • The results of reading data is automatically updated with the pause 50ms (20Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects in: 0 - 6.5 m and is able to measure the distance of objects in range: 0.15 - 6.5 m
  • Resolution: 2.54 cm
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 19.9 mm x 22.1 mm x 15.5 mm

LV-MaxSonar EZ0 Sonar Range Finder

Distance measuring sensor module an ultrasonic based object that is able to detect objects within a range of 0 - 6.5 m and the application that are most sensitive in detecting an object when compared with LV-EZ-series MaxSonar others.

Specifications:

  • Ultrasonic-based distance measuring sensor that works at a frequency of 42kHz.
  • Working on power supply 2.5 VDC - 5.5 VDC with a current consumption of 2mA.
  • The results of reading data is automatically updated with the pause 50ms (20Hz).
  • Can be operated automatically in measuring the distance (free-run) or manually (triggered).
  • Able to detect objects in: 0 - 6.5 m and is able to measure the distance of objects in range: 0.15 - 6.5 m
  • Resolution: 2.54 cm
  • Have an interface: pulse width, analog voltage and serial UART TTL (not RS-232).
  • Using 1 piece transducer is used as a transmitter and receiver.
  • Low power consumption, making it suitable for battery-based applications.
  • Can be connected with a variety of microcontrollers.
  • Dimensions: 19.9 mm x 22.1 mm x 15.5 mm

Tuesday, August 16, 2011

TSL1401-db (Daughterboard) Linescan Imaging Sensor

The TSL1401-DB is a daughterboard that provides a TAOS TSL1401R 128-pixel linear array sensor and a lens. It is designed to plug into a motherboard (e.g. MoBoStamp-pe (p/n 28300), MoBoProp (p/n 28303, in development), Propeller Backpack (p/n 28327)) or the DB-Expander (p/n 28325). This module will allow its host system to “see” in one dimension. Two- dimensional vision can also be achieved by moving either the subject or the sensor in a direction perpendicular to the sensor axis.

Features

• Provides vision in one dimension with 128-pixel resolution.
• Three-line serial interface with analog intensity output for each pixel.
• Included 7.9mm lens provides a field of view equal to subject distance.
• Plug-compatible with Parallax motherboards.
• Coprocessor driver firmware for the MoBoStamp-pe available for download.
• Can be interfaced directly to a BASIC Stamp for some functions.
• Onboard accessory socket for strobe output or 50/60Hz fluorescent light sync input.
• Runs from 3.3V or 5V supplies. (5V is needed for the optional LED strobe attachment.)

Applications

• Measure height, width, diameter, thickness.
• Locate objects, lines, edges, gaps, holes.
• Count items; measure conveyor coverage.
• Determine volume, shape, orientation.
• Read simple barcodes.
• Learn the principles of machine vision.

Saturday, August 13, 2011

PIR325 with FL65 Fresnel lens

The pyroelectric sensor is made of a crystalline material that generates a surface electric charge when exposed to heat in the form of infrared radiation. When the amount of radiation striking the crystal changes, the amount of charge also changes and can then be measured with a sensitive FET device built into the sensor. The sensor elements are sensitive to radiation over a wide range so a filter window is added to the TO5 package to limit incoming radiation to the 8 to 14µm range which is most sensitive to human body radiation.

The PIR325 sensor has two sensing elements connected in a voltage bucking configuration. This arrangement cancels signals caused by vibration, temperature changes and sunlight. A body passing in front of the sensor will activate first one and then the other element as shown in figure 2 whereas other sources will affect both elements simultaneously and be cancelled. The radiation source must pass across the sensor in a horizontal direction when sensor pins 1 and 2 are on a horizontal plane so that the elements are sequentially exposed to the IR source.

specifications:
- Power supply: 2,5 V - 15V.
- Output: 3900 mVpp.
- Offset Voltage: 1.0 V.
- Spectral response: 5-14 um.
- Noise: 20 uVpp.
- Fresnel lens (FL65): 0.65-inch focal length & transmission range 8-14 um.

Friday, August 12, 2011

IMCU7100Debugger

IMCU7100Debugger


Features:

  • Quick Test of W7100
  • Expansion Port
  • Provide WizISP for programming
  • Support Debugger for Debugging
  • Support Various Interfaces : Serial, Ethernet, DTAG (Debugger Socket)
  • Embedded 64kBytes Flash memory, 64kBytes RAM, and 256Bytes Data Flash

Part
Description
Remark
MCU
Internet Embedded MCU - W7100
8051
compatible
Memory
64KBytes Data Memory
64KBytes Code Memory
2KBytes Boot code Memory
256Bytes Data Flash
Embedded in W7100
Serial
On board RS-232C 1Port with DB9 Connector
Ethernet
On board MAC-Jack (Transformer + RJ-45 Connector)
LCD
16Character * 2Line Character LCD
LED
User Debugging LED 3Ea
Network Status LED 8Ea
Button
Reset Switch 1Ea
Debugger
On board Debugger Socket
Expansion Port

MCU port expantion
  • 32Pin (8pin*4) 2.54mm Pitch Pin-Header Hole
  • 14Pin (7pin*2) 2.54mm Pitch Pin-Header Hole
  • 32Pin (8pin*4) 2.00mm Pitch Pin-Header Hole
  • 14Pin (7pin*2) 2.00mm Pitch Pin-Header Hole
Dummy Hole
  • 167Pin 2.54mm Pitch Dummy Hole
  • 236Pin 2.00mm Pitch Dummy Hole
Power
DC 5V / 2A Adapter
PCB
120mm * 80mm Size

SECUGEN HAMSTER IV

SecuGen Hamster IV is the FBI Certified addition to SecuGen's popular and versatile fingerprint reader product line. Packaged in a comfortable, ergonomic design, Hamster IV features the industry's most rugged and advanced optical sensor using patented SEIR fingerprint biometric technology.

Auto-On™ is an Automatic Finger Placement Detection technology that automatically checks for the presence of a finger. When used with Auto-On-compatible software*, the Hamster IV will turn on and scan your finger as soon as you touch the sensor - all without having to prompt the system.

Smart Capture™ ensures quality fingerprint scanning of difficult fingers. By automatically adjusting the brightness of the sensor, Smart Capture allows the Hamster IV to capture high quality fingerprints from a wide range of traditionally difficult fingers, including those from dry, wet, scarred or aged skin, and even in bright ambient

conditions such as under direct sunlight.
Use SecuGen Hamster IV together with SecuGen's MINEX Certified Template Generator and Matcher to develop PIV-compliant applications that require fingerprint biometrics (available in a variety of SDKs).

SECUGEN HAMSTER IV FEATURES
  • FBI Certified "PIV Single Finger Capture Device"
  • GSA APL listed and FIPS 201 / PIV compliant
  • High-performance, maintenance-free optical fingerprint sensor
  • Sensor resistant to scratches, impact, vibration and electrostatic shock
  • Auto-On™ (Automatic Finger Placement Detection)*
  • Smart Capture™ (Self-Adjusting Fingerprint Brightness)
  • USB connection
  • Removable weighted stand
  • Compact, lightweight and portable
  • Integrated finger guide
  • Readily accessible for any finger
  • Driver CD included

SECUGEN HAMSTER PLUS

SecuGen Hamster Plus is the improved version of SecuGen's popular and versatile fingerprint reader product line, with Auto-On™ and Smart Capture™. Packaged in a comfortable, ergonomic design, the Hamster Plus features the industry's most rugged and advanced optical sensor using patented SEIR fingerprint biometric technology.

Auto-On™ is an Automatic Finger Placement Detection technology that automatically checks for the presence of a finger. When used with Auto-On-compatible software*, the Hamster Plus will turn on and scan your finger as soon as you touch the sensor - all without having to prompt the system.

Smart Capture™ ensures quality fingerprint scanning of difficult fingers. By automatically adjusting the brightness of the sensor, Smart Capture allows the Hamster Plus to capture high quality fingerprints from a wide range of traditionally difficult fingers, including those from dry, wet, scarred or aged skin, and even in bright ambient conditions such as under direct sunlight.

SecuGen Hamster Plus can be used for authentication, identification and verification functions that let your fingerprints act like digital passwords that cannot be lost, forgotten or stolen. Check with your software provider to ensure that the software works with Auto-On.

SECUGEN HAMSTER PLUS FEATURES
  • High-performance, maintenance-free optical fingerprint sensor
  • Sensor resistant to scratches, impact, vibration and electrostatic shock
  • Auto-On™ (Automatic Finger Placement Detection)*
  • Smart Capture™ (Self-Adjusting Fingerprint Brightness)
  • USB connection
  • Removable weighted stand
  • Compact, lightweight and portable
  • Integrated finger guide
  • Readily accessible for any finger
  • Driver CD included
  • Three year limited warranty

SECUGEN ID-USB SC/PIV

SecuGen iD-USB SC/PIV™ is a combination fingerprint reader and smart card reader housed in a ready-to-use USB device suitable for FIPS 201-compliant / PIV / dual-factor authentication applications. The iD-USB SC incorporates SecuGen’s ruggedized, high image quality FDU04™ fingerprint optic module together with a PC/SC smart card reader.

SECUGEN ID-USB SC/PIV FEATURES
  • HFBI Certified "PIV Single Finger Capture Device"
  • GSA APL listed and FIPS 201 / PIV compliant
  • High-performance, maintenance-free optical fingerprint sensor
  • Sensor resistant to scratches, impact, vibration and electrostatic shock
  • Auto-On™ (Automatic Finger Placement Detection technology that automatically checks for the presence of a finger. When enabled, the fingerprint reader will turn on and scan your finger as soon as you touch the sensor - all without having to prompt the system.)
  • Smart Capture™ (Self-Adjusting Fingerprint Brightness technology that ensures quality fingerprint scanning of difficult fingers. By automatically adjusting the brightness of the sensor, Smart Capture allows the fingerprint reader to capture high quality fingerprints from a wide range of traditionally difficult fingers, including those from dry, wet, scarred or aged skin, and even in bright ambient conditions such as under direct sunlight.)
  • Integrated finger guide allows ready access by any finger in any orientation
  • 100% compatible with Hamster IV fingerprint reader (HFDU04)
  • PC/SC Compliant USB Smart Card Reader, 100% compatible with HID Omnikey 3121
  • USB bus-powered, no additional power supply required
  • Plug 'n Play, hot-swappable
  • Surface mountable case with integrated screw mounts
  • One year limited warranty

SECUGEN ID-USB SC

SecuGen iD-USB SC™ is a combination fingerprint reader and smart card reader housed in a ready-to-use USB device suitable for dual-factor authentication applications. The iD-USB SC incorporates SecuGen’s ruggedized, high image quality SDU03M™ fingerprint optic module together with a PC/SC smart card reader.

SECUGEN ID-USB SC FEATURES
  • High-performance, maintenance-free optical fingerprint sensor
  • Sensor resistant to scratches, impact, vibration and electrostatic shock
  • Auto-On™ (Automatic Finger Placement Detection technology that automatically checks for the presence of a finger. When enabled, the fingerprint reader will turn on and scan your finger as soon as you touch the sensor - all without having to prompt the system.)
  • Smart Capture™ (Self-Adjusting Fingerprint Brightness technology that ensures quality fingerprint scanning of difficult fingers. By automatically adjusting the brightness of the sensor, Smart Capture allows the fingerprint reader to capture high quality fingerprints from a wide range of traditionally difficult fingers, including those from dry, wet, scarred or aged skin, and even in bright ambient conditions such as under direct sunlight.)
  • Integrated finger guide allows ready access by any finger in any orientation
  • 100% compatible with Hamster Plus fingerprint reader (HSDU03M, HFDU03FRS, HFDU03FR)
  • PC/SC Compliant USB Smart Card Reader, 100% compatible with HID Omnikey 3121
  • USB bus-powered, no additional power supply required
  • Plug 'n Play, hot-swappable
  • Surface mountable case with integrated screw mounts
  • One year limited warranty

SECUGEN ID-SERIAL

SecuGen iD-SERIALis a fingerprint authentication system designed for integration into applications such as point-of-sale (POS), time and attendance tracking or any other application where a serial interface is preferred. The iD-SERIAL incorporates SecuGen’s stand-alone SDA03M™ module, featuring a ruggedized, high image quality SDOPP03M fingerprint optic module, an on-board processor, serial cable and external power supply.

In addition to fingerprint enrollment, matching and storage capabilities, the iD-SERIAL includes SecuGen’s high speed SecuSearch™ fingerprint identification algorithm for extremely fast 1:N search capabilities.

The iD-SERIAL has an RS-232 interface and uses an RJ-22 modular jack for maximum flexibility in cable configurations. The serial interface supports communication speeds up to 460800 BPS. Integration of the SecuGen iD-SERIAL into any application is facilitated by the iD-SERIAL Developer’s Kit, which is sold separately.

SECUGEN ID-SERIAL FEATURES
  • High-performance, maintenance-free optical fingerprint sensor
  • Sensor resistant to scratches, impact, vibration and electrostatic shock
  • Auto-On™ (Automatic Finger Placement Detection technology that automatically checks for the presence of a finger. When enabled, the fingerprint reader will turn on and scan your finger as soon as you touch the sensor - all without having to prompt the system.)
  • Smart Capture™ (Self-Adjusting Fingerprint Brightness technology that ensures quality fingerprint scanning of difficult fingers. By automatically adjusting the brightness of the sensor, Smart Capture allows the fingerprint reader to capture high quality fingerprints from a wide range of traditionally difficult fingers, including those from dry, wet, scarred or aged skin, and even in bright ambient conditions such as under direct sunlight.)
  • Fingerprint capture and template creation with option to use proprietary or ANSI-INCITS 378-2004 standard formats
  • Capability to transmit templates to separate central server/database for storage and matching
  • Available on-board 1:1 and 1:N (SecuSearch®) matching algorithms with optional internal storage capacity of 3,000 users
  • Serial RS-232 interface with RJ-22 modular jack for maximum flexibility in cable configurations
  • Surface mountable with integrated screw mounts
  • Integrated finger guide
  • Designed for ready access by any finger in any orientation
  • Power adapter
  • One year limited warranty

Thursday, August 11, 2011

WIZ-iStorage usb to ethernet

WIZ-iStorage is a USB-to-Ethernet converting module that enables data to be transmitted from a USB Mass Storage device over Ethernet. WIZ-iStorage operates as FTP server. Therefore, it is possible to read or write the data to USB Mass Storage by using FTP client Program.

Features:
Operates as FTP Server 6
Supports USB Mass Storage Host
Easy & fast Ethernet Implementation to USB Mass Storage Device.
Guaranteed system stability and reliability using W5100 hard-wired chip
Supported by Configuration Tool Program for easy configuration and control
Supports 10/100 Mbps Ethernet Interface
Supports USB2.0
RoHS Compliant

Technical Specifications:
  • AVR compliant – AT90USB1287 MCU (having internal 128K Flash, 8K SRAM, 4K EEPROM)
  • TCP/IP - W5100 (Ethernet MAC & PHY Embedded)
  • UDP – Configuration
  • Protocols : FTP Server – File Transfer 7, DHCP
  • Network Interface 10/100 Mbps Auto-sensing, RJ-45 Connector
  • USB Interface USB2.0 Full Speed Host
  • Input Voltage DC 5V
  • Power Consumption Under 180mA
  • Temperature 0°C ~ 80°C (Operation), -40°C ~ 85°C (Storage)
  • Humidity 10 ~ 90%

Wednesday, August 10, 2011

WIZ-SM10 module and evaluation Board type

WIZ-SM10 module is designed for Serial to Ethernet application, especially the connection with smart metering devices using 2 UART and SPI interfaces, etc. RS-232, RS-485, M-bus, MicroSD memory, Wi-Fi and Zigbee modules, all of them can be connected with WIZ-SM10 via the UART and SPI interface.

In terms of accessories, the firmware code matched with WIZ-SM10 and configuration tool are available. Users can develop their own applications using these useful accessories.

Key Features
  • 2 port Serial to Ethernet gateway
  • Multiple serial commands for serial configuration
  • Static IP, DHCP, PPPoE
  • DNS
  • Configuration tool program
  • 10/100 Mbps Ethernet and 230Kbps serial communication
  • mSD for data logging
  • UART and SPI interface for connecting with external device

Products specifications

  • TCP / IP W5100
  • PHY Included in W5100
  • Auto negotiation (Full-duplex and Half-duplex)
  • Auto MDI/MDIX
  • Architecture Serial 2 Port RS-232C
  • MCU STM32F103C8T6 (STmicro CortexM3)
  • LQFP 48 package
  • Internal 64KBytes FLASH memory
  • Internal 20KBytes embedded SRAM
  • Dimensions 55mm x 35mm x 10mm
  • Connector type 2.0 mm Pitch Pin-header, 14Pin & 28Pin
  • Input voltage DC 3.3V
  • Power consumption Under 150mA
  • Temperature 0°C ~ 70°C (Operation), -40°C ~ 85°C (Storage)
  • Humidity 10 ~ 90%

WIZ-SM10 Base board

WIZ-SM10 Base board is designed for evaluate WIZ-SM10’s performance.

The Arduino Blue Tooth

The Arduino Blue Tooth is a microcontroller board based on the ATmega168  and the Bluegiga WT11 bluetooth module . It supports wireless serial communication over bluetooth (but is not compatible with Bluetooth headsets or other audio devices). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth connection. Instructions are available for getting started with the Arduino BT.

Specifications:

  • Microcontroller ATmega168
  • Operating Voltage 5V
  • Input Voltage 1.2-5.5 V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 16 KB (of which 2 KB used by bootloader)
  • SRAM 1 KB
  • EEPROM 512 bytes
  • Clock Speed 16 MHz

The Arduino Ethernet Shield

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled.

The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega (using the Ethernet library). The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4.
The latest revision of the shield also includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up. The original revision of the shield contained a full-size SD card slot; this is not supported.

The 6-pin serial programming header is compatible with FTDI USB cables and the Sparkfun and Adafruit FTDI-style basic USB-to-serial breakout boards. It features support for automatic reset, allowing sketches to be uploaded without pressing the reset button on the board. When plugged into a FTDI-style USB adapter, the Arduino and Ethernet shield are powered off the adapter.

Arduino Xbee shield

The Arduino Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).

The Xbee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks).

The LilyPad Arduino

The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega168V (the low-power version of the ATmega168) or the ATmega328V . The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics.

Specifications:
  • Microcontroller ATmega168V or ATmega328V
  • Operating Voltage 2.7-5.5 V
  • Input Voltage 2.7-5.5 V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • Flash Memory 16 KB (of which 2 KB used by bootloader)
  • SRAM 1 KB
  • EEPROM 512 bytes
  • Clock Speed 8 MHz

SMS control and Alarm system

SMS control and Alarm system
An alarm system and control home appliances based on SMS. As an alarm function, this unit can be connected to various types of sensors such as the Smoke Detector, Motion Detector or LPG Detector. As a control function, this unit can control the activation of lights, water pumps or other electrical equipment via SMS or scheduled by time, so the system can activate the contact at certain hours every day, once or on certain days

specifications:
- Can be programmed for more than 20 Cell Phone user
- 4 contacts control max 400VAC / 5A Solid State
- 4 Manual Switch
- Can be programmed for each 5 schedule at each contact
- 2 group alarm sensor inputs that can be programmed with a message
- Each group can be paralleled up to 10 units of the same alarm
- There is a remote control for the panic button, activate the alarm and control equipment macros
- USB Port for programming messages and user numbers
- Mode arm / disarm can  manually set, miss call from Cell Phone or the remote control

Navigation Sensor & Range Finder module

Navigation Sensor & Range Finder module

This module is a sub system for navigating a very practical when used in robotics applications. Equipped with 8 ports for sonar range sensors and eight ports for infrared distance sensor system can detect the distance to the 8 cardinal directions with the two methods ie ultrasonic and infrared. Ultrasonic method is used to detect accurately the distance to the object of a mirror that would interfere with the accuracy of the infrared method. While the infrared method is used to detect the distance to the object that groove disturbing accuracy ultrasonic method. The combination of these two methods will obtain a more accurate distance calculations.

Using the Compass Devantech CMPS09 or CMPS10, this module can detect the 8 cardinal directions, magnetic field strength, 3 axis acceleration and can also save the robots in the form of route directions, slope and duration. This enables the robot to track back toward home.

specifications:
- 8 inputs Infrared Range Finder (GP2D12 or GP2Y0A21)
- 8 input Ultrasonic Range Finder (SRF-05 or Ping)
- Digital Compass CMPS03 Devantech Port compatible
- Digital Compass CMPS09/CMPS10 Devantech Port Compatible
- Can detect the direction of the wind (Devantech Compass attached)
- Can detect 3 axis acceleration (Devantech Compass CMPS09 / CMPS10 attached)
- Can detect a magnetic field (Compass Devantech attached)
- Can record robot journey into memory (Devantech Compass attached)
- Dimensions 5.3 x 3.2 cm

Tuesday, August 09, 2011

Spykee, the WiFi Spy robot

Spykee, the WiFi Spy robot is a robot to be built that moves, sees, hears and speaks! He can be controlled from anywhere in the world thanks to Internet from a computer(1)! You can also control him nearby thanks to WiFi.

Spykee has a video surveillance system; he detects movements and sets off an alarm or sends a picture of what he has seen. Stay in contact with your family and your friends by communicating thanks to the webcam and VoiP (2) .With Spykee, you can take pictures and make videos. The robot reads your mp3 music tracks(3) that have been previously downloaded on the Spykee control console. Spykee is sold with a recharging base that allows the robot to be recharged remotely. Finally the robot can do different special effects: video filters, sound and light effects.

Recommended age: 8 years and over.

Robot to build: more than 200 parts compatible with other Meccano parts (tool and building instructions included) – 3 models. 
The product works with a NiMh 9.6V battery and a recharging base included.
The instruction manual is available in English and French only.

Technical Specifications :
  • PC/ Mac Compatible(1)
  • 200 MHz ARM9
  • 32Mb SDRAM
  • 4Mb NOR Flash
  • WiFi client 802.11b/g
  • USB host
  • 8-bits µC to control the dual DC motor and control the charge
  • 4 LEDs and 1LED flash
  • Camera QVGA CMOS (320 x 240 pixels)
  • Infrared receiver
  • Charge control for the 9.6V NiMH battery
  • JTAG / Serial / port i2c port available
  • Joypad compatible
  • Electret microphone
  • Loudspeaker 8 Ohm 2W
  • Audio sampler microphone 16bits / 16 kHz
  • Sampler speaker 16bits / 8 to 48 kHz