Friday, April 29, 2011

Arduino Uno

Arduino Uno
The Arduino Uno is a microcontroller board based on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.

"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.

Summary
  • Microcontroller ATmega328
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328)
  • EEPROM 1 KB (ATmega328)
  • Clock Speed 16 MHz
Arduino Uno Board front and back
Power

The Arduino Uno can be powered via the USB connection or with an external power supply. The power source is selected automatically.

External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

The power pins are as follows:

VIN. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.

5V. The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.

3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 50 mA.

GND. Ground pins.

Memory

The ATmega328 has 32 KB (with 0.5 KB used for the bootloader). It also has 2 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).

Input and Output

Each of the 14 digital pins on the Uno can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:

Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the ATmega8U2 USB-to-TTL Serial chip.

External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.

PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.

SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI library.

LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.

The Uno has 6 analog inputs, labeled A0 through A5, each of which provide 10 bits of resolution (i.e. 1024 different values). By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and the analogReference() function. Additionally, some pins have specialized functionality:
e on the computer. The '8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer (but not for serial communication on pins 0 and 1).

A SoftwareSerial library allows for serial communication on any of the Uno's digital pins.

The ATmega328 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the I2C bus; see the documentation for details. For SPI communication, use the SPI library.

Programming

The Arduino Uno can be programmed with the Arduino software (download). Select "Arduino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.

The ATmega328 on the Arduino Uno comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).

You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see these instructions for details.

The ATmega8U2 firmware source code is available . The ATmega8U2 is loaded with a DFU bootloader, which can be activated by connecting the solder jumper on the back of the board (near the map of Italy) and then resetting the 8U2. You can then use Atmel's FLIP software (Windows) or the DFU programmer (Mac OS X and Linux) to load a new firmware. Or you can use the ISP header with an external programmer (overwriting the DFU bootloader). See this user-contributed tutorial for more information.

Automatic (Software) Reset

Rather than requiring a physical press of the reset button before an upload, the Arduino Uno is designed in a way that allows it to be reset by software running on a connected computer. One of the hardware flow control lines (DTR) of the ATmega8U2 is connected to the reset line of the ATmega328 via a 100 nanofarad capacitor. When this line is asserted (taken low), the reset line drops long enough to reset the chip. The Arduino software uses this capability to allow you to upload code by simply pressing the upload button in the Arduino environment. This means that the bootloader can have a shorter timeout, as the lowering of DTR can be well-coordinated with the start of the upload.

This setup has other implications. When the Uno is connected to either a computer running Mac OS X or Linux, it resets each time a connection is made to it from software (via USB). For the following half-second or so, the bootloader is running on the Uno. While it is programmed to ignore malformed data (i.e. anything besides an upload of new code), it will intercept the first few bytes of data sent to the board after a connection is opened. If a sketch running on the board receives one-time configuration or other data when it first starts, make sure that the software with which it communicates waits a second after opening the connection and before sending this data.

The Uno contains a trace that can be cut to disable the auto-reset. The pads on either side of the trace can be soldered together to re-enable it. It's labeled "RESET-EN". You may also be able to disable the auto-reset by connecting a 110 ohm resistor from 5V to the reset line; see this forum thread for details.

USB Overcurrent Protection

The Arduino Uno has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Physical Characteristics

The maximum length and width of the Uno PCB are 2.7 and 2.1 inches respectively, with the USB connector and power jack extending beyond the former dimension. Four screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
 The Newer version of UNO click here.  More about Arduino & Shields click here.
Arduino Uno Schematic Reference

Thursday, April 28, 2011

used Cisco 1721 with 16Flash/32DRAM, IOS12.1

The Cisco 1721 is a modular router optimized for data-access applications, providing businesses with the most complete functionality and flexibility to deliver secure Internet and Intranet access. The router offers a wide array of WAN access options, high-performance routing, Quality of Service, inter-virtual LAN routing, and VPN access with firewall options. Powered by Cisco IOS, the Cisco 1721 offers high reliability and flexibility of interchangeable WAN interface cards, comprehensive security that includes hardware-assisted VPN encryption and a stateful inspection firewall, and business-class DSL with enhanced quality of service to ensure high-performance levels are guaranteed.

more info:

Wednesday, April 20, 2011

TMS320C6678, Multicore Fixed and Floating-Point Digital Signal Processor

TMS320C6678, Multicore Fixed and Floating-Point Digital Signal Processor

The TMS320C6678 Multicore Fixed and Floating Point Digital Signal Processor is based on TI's KeyStone multicore architecture. Integrated with eight C66x CorePac DSPs, each core runs at 1.0 to 1.25 GHz enabling up to 10 GHz. The device supports high-performance signal processing applications such as mission critical, medical imaging, test, and automation. The C6678 platform is power efficient and easy to use. The C66x CorePac DSP is fully backward compatible with all existing C6000 family of fixed and floating point DSPs.

Features
  • Eight TMS320C66x DSP Core Subsystems at 1.00 GHz and 1.25GHz
  • 320 GMAC/160 GFLOP @ 1.25GHz
  • 32KB L1P, 32KB L1D, 512KB L2 Per Core
  • 4MB Shared L2
  • Multicore Navigator and TeraNet Switch Fabric - 2 Tb
  • Network Coprocessors- Packet Accelerator, Security Accelerator
  • Four Lanes of SRIO 2.1 - 5 Gbaud Per Lane Full Duplex
  • Two Lanes PCIe Gen2 - 5 Gbaud Per Lane Full Duplex
  • HyperLink - 50Gbaud Operation, Full Duplex
  • Ethernet MAC Subsystem - Two SGMII Ports w/ 10/100/1000 Mbps operation
  • 64-Bit DDR3 Interface (DDR3-1600) - 8 GByte Addressable Memory Space
  • 16-Bit EMIF - Async SRAM, NAND and NOR Flash Support
  • Two Telecom Serial Ports (TSIP) - 2/4/8 Lanes at 32.768/16.384/8.192
  • UART Interface
  • I2C Interface
  • 16 GPIO Pins
  • SPI Interface
  • Sixteen 64-Bit Timers
  • Three On-Chip PLLs

TMS320C5416 DSP Starter Kit

TMS320C5416 DSP Starter Kit

The TMS320C5416 DSP starter kit (DSK) is a low-cost development platform designed to speed the development of power-efficient applications based on TI's TMS320C54x DSPs. The kit, which provides new performance-enhancing features such as USB communications and true plug-and-play functionality, gives both experienced and novice designers an easy way to get started immediately with innovative product designs.

The C5416 DSK offers the ability to detect, diagnose and correct DSK communications issues, download and step through code faster and get a higher throughput with Real Time Data Exchange (RTDX™).

The kit includes:

C5416 DSP Development Board -
C5416 DSK Code Composer Studio™ v2.1 IDE
Quick Start Guide
Technical Reference
Customer Support Guide
USB Cable
Universal Power Supply
AC Power Cord(s)

Features

The TMS320C5416 features the TMS320C5416 DSP - the designer's choice for applications that require an optimized combination of power performance and area. With 160 MIPS performance, designers can use the 160 MHz device as the foundation for a range of signal processing applications, including speech compression/decompression, speech recognition, text-to-speech conversion, fax/data conversion and echo cancellation. Other hardware features of the TMS320C5416 DSK board include:

  • Embedded JTAG support via USB
  • High-quality 16-/20-bit stereo codec
  • Four 3.5mm audio jacks for microphone, line in, speaker and line out
  • 256K words of Flash and 64K words RAM
  • Expansion port connector for plug-in modules
  • On-board standard JTAG interface
  • +5V universal power supply
Software Tools - Designers can readily target the TMS32C5416 DSP through TI's robust and comprehensive Code Composer Studio development platform. The tools, which run on Windows© 98, Windows 2000 and Windows XP, allow developers to seamlessly manage projects of any complexity. Code Composer Studio features for the TMS320C5416 DSK include:

A complete Integrated Development Environment (IDE), an efficient optimizing C/C++ compiler assembler, linker, debugger, an a advanced editor with Code Mastro™ technology for faster code creation, data visualization, a profiler and a flexible project manager
DSP/BIOS™ real-time kernel
Target error recovery software
DSK diagnostic tool
"Plug-in" ability for third-party software for additional functionality

Saturday, April 16, 2011

Gyro Sensor GS-12 by Robotis

Gyro Sensor GS-12 Dual axis gyro sensor for robot (bioloid)

GS-12
DESCRIPTION


- Can be used to measure the sensor¡¯s angular velocity.

- Can be used to calculate how much the robot is tilted/inclined or which direction the force is from.

- Can be used to balance the robot or program applied movements.


H/W SPECIFICATIONS

- Weight : 2.8 g

- Dimension : 23mm * 23mm* 10mm

- Operating Temperature : -40¡É ~ 85¡É

- Angular Velocity Measurement Range : -300¢ª/s ~ 300¢ª/s

- Recommended Voltage : 4.5 ~ 5.5 V


COMPATIBLE PRODUCTS

- Controller : CM-510, CM-700

Bioloid GP

Bioloid GP (Grand Prix) is a Top-Notch humanoid robot optimized for various robot competition. 

With hi-performance actuator AX-18A and ultra light high strength of aluminum frames, it will complete various mission given at competitions. Bioloid GP armed with versatile performance and powerfull mobility.

Features:
  • Top-Notch Humanoid armed with high performance actuator Dynamixel AX-18A
  • Ultra light and hi-strength of aluminum frames
  • Powerfull mobility including a direction switch while moving and fast walking
  • Basic humanoid battle and soccer motion are provided
  • Can adjust posture while walking with gyro sensor
  • Include a gripper set for mission completion
  • Include optional frame for waist twisting
  • Include wireless remote Controller (Zigbee embedded)
  • Include a Roboplus, an upgraded powerfull software programming tool
  • Digital Packet communication and simple daisy chain Connection

Friday, April 15, 2011

68HC11 EVBpluss V3 code name Husky11

The 68HC11 EVBpluss V3 code name Husky11-USB board is very similar to the original Motorola EVB board in terms of the PCB component layout, thus allowing a smooth transition for upgrading the old EVB board. All users’ EVB/EVBU/EVBU2 add-on boards can also be used without any modifications. A small solderless breadboard allows quick prototyping of user’s additional circuits.
68HC11 EVB V3 codename ''HUSKY11''

Husky11 features:

USB interface based on the flawless FT232RL for all Windows O/S
On-board RGB piranha color LED
On-board 4 X 4 keypad
Speaker driven by timer, or DAC for alarm, voice and music applications
DPDT form C relay
Temperature sensor for home automation applications
Light sensor for home automation applications
Dual H-Bridge for controlling two DC motors or one Stepper motor
Four robot servo outputs with a terminal block for external 5V
Dual 10-bit DAC for testing SPI interface and generating analog waveforms
Real Time Clock DS1302 with battery
Free 9V 1A switching power supply AC adapter for US and Canadian orders
68HC11E1 with on-board 32K RAM and 32K EEPROM
RS485 communication port with terminal block for daisy chaining
On-board 16X2 LCD display module with LED backlight and it can be replaced by any size of LCD display module via a 16 pin cable assembly
On-board 4 digit seven segment display module
Dual serial ports, 68HC11’s SCI is available for user application programs
Eight LEDs connected to port B
An 8 position DIP switch connected to port C
Four push button switches connected to PC0, PC1, PC2 and PA0
On-board IR transceiver with built-in crystal frequency based 38KHz digital oscillator
On-board speaker for music applications
On-board potentiometer trimmer pot for analog input
68HC24 port replacement unit for port B and C in real time single chip emulation
Additional 16 I/O lines provided by a 65C22 VIA for keypad and LCD applications
30K on-board RAM from $8800 to $FFFF for user code
All on-chip RAM $00-$1FF, and 512 bytes of EEPROM available for user program
All I/O pins of the 68HC11 available to user program, including PE0 and PA3
Installed with BUFFALO 4.0 monitor. This allows professors to avoid changing teaching material if using the board in BUFFALO monitor mode, since all programs for EVB/EVBU/EVBU2 boards can run with identical memory maps
Debugging features
of Wytec phantom monitor
Built-in LCD driver software in firmware
Works as a WICE emulator without hardware breakpoint features
Read internal ROM code of the 68HC711E9 and disassemble it for reverse engineering
38.4K baud for fast file download, 4 time faster than a BUFFALO monitor based board
Single-stepping
Eight breakpoints
Data watch for memory and registers
User-friendly and interactive 68HC11 online assembler
Display 68HC11 internal registers and control bit assignment map using standard Motorola labels
Symbolic debugging compatibility with most assemblers and compilers, including Motorola 68HC11 assembler freeware
Exit a user program with key - even if the program is hung
Phantom Monitor technology preserves all user interrupt vectors, including RESET - an EVBplus exclusive
Logic probe with LED indicator
Fast SPI expansion port scans 10,000 I/O devices per second
Auto start user program after power on
40 pin Motorola EVM compatible bus signal connector for logic analyzer
60 pin EVB/EVBU/EVBU2 compatible male header and female socket connector for user I/O boards and fast prototyping with the on-board solderless breadboard
Ability to run all sample programs in the following books:
"Etcheverry’s Introduction to the 68HC11 Lab Manual" by Fred Etcheverry
"The 68HC11 Microcontroller" by Professor Joseph D. Greenfield
"MC68HC11 An Introduction Software and Hardware Interface" by Professor Han-Way Huang
"Microcomputer Engineering" by Professor Gene H. Miller
"Using the M68HC11 microcontroller: A guide to interface and programming" by Professor John C. Skroder
"Microcontroller Technology: The 68HC11" by Professor Peter Spasov
Package also includes useful software:
Fully debugged 68HC11 program examples including source code
Example program that simultaneously scans keypad, plays a song, multiplexes seven segment display, changes display brightness by adjusting trimmer pot and detects object by using IR transceiver as a proximity sensor
Eric Engler’s AsmIDE software
Includes Solderless breadboard.
Large size PC board: 8.5" X 5.4"
USB cable for connecting to a PC USB port

Example applications:

EVM, EVS replacement
68HC11 Trainer for students
68HC11 prototype platform for engineers
Single Chip Real Time Emulation for the 68HC711E9, E20
68HC11 SBC, Single Board Computer
Robot Applications
Home Automation via X10 or RS485 interface
Home Security System
Fingerprint Access Control
Electronic Voting Machine via RS485 interface
Personal Alarm Clock
Personal Weather Station
Voice Processing Applications ( Voice Recorder and Voice Recognition System )
Industrial control and Instrumentation Applications
Metal Detector and Ultrasonic Motion Detector Applications
Eight Channel Christmas Light Chaser
DC Motor Speed Control
Stepper Motor Control
Telephone DTMF tone Remote Control
Infrared Remote Control
RF wireless Remote Control System with external RF transceiver module

DATACARD® SP55 PLUS CARD PRINTER

DATACARD® SP55 PLUS CARD PRINTER, A POWERFUL CHOICE FOR FAST, VERSATILE CARD PRINTING
The Datacard® SP55 Plus card printer combines the speed and power of professional-grade card printing with the overall versatility you need to deliver high-quality cards for corporate, education, loyalty, entertainment and other markets.

• High productivity. The SP55 Plus card printer produces up to 190 one-sided, full-color cards or 1,000 one-sided, single-color cards per hour. Optional extra- large card input and output hoppers help ensure continuous productivity. High speed meets high quality with true edge-to-edge printing and sharp, crisp images driven by our exclusive Advanced Image Technology™. The printer also features front card loading and unloading, so you can place it anywhere.
• Versatile performance. The SP55 Plus card printer offers smart card, proximity card, ISO magnetic stripe and bar code options that make it easy to create a widerange of cards on demand. It is ideal for issuing multi-technology photo IDs thatprovide secure access to facilities, networks and other privileges. This printer also can issue secure IDs in schools as well as loyalty cards and VIP cards for casinos.
• Intelligent features. An innovative printer driver provides all the information you need on screen, including message prompts, color image previews and online user help. The SP55 Plus card printer also offers a built-in LCD and optional Ethernetconnectivity.
• Smart cards/proximity cards. Issue personalized contact or contactless smart cards for e-purse and access control programs.
• Bar codes and magnetic stripes. Choose the machine-readable technology that fits with your access control and other automated systems.
• One- or two-sided printing. Print high-quality, single or full-color images across one or both sides of a card. Choose one-sided inline printing or optional two-sided inline printing.
• Photos, graphics, and signatures. Create superb cards with brilliant color, lifelike photos and other crisp, sharp graphics.

Standard features
Print capabilities
One- or two-sided edge-to-edge printing Continuous-tone, full-color, black-and white photos ,Alphanumeric text, logos and digitized signatures. Variety of bar codes, Background patterns, Printer Pooling .

Advanced Imaging Technology™ 

Print speed
Full-color printing:
Up to 190 cards per hour (one-sided), Up to 155 cards per hour (two-sided) 
Monochrome printing: 
Up to 1,000 cards per hour (one-sided), Up to 450 cards per hour (two-sided) 

Printer Memory  
32 MB Standard 

Connectivity
Bi-directional USB

Capacity
Input hopper: 100 cards, 0.03 in. (0.76mm), Output hopper: 40 cards, 0.03 in. (0.76mm) 

Printer driver
User-adjustable image and color controls  . Stand-alone driver diagnostics Color image and test card preview Online user help, Add text, image or pattern to topcoat, Supply usage tab.

User-friendly operation
Audible and visual message prompts Automatic card feed Operator-replaceable printhead Continuous cleaning roller 

Datacard®    Certified Supplies featuring Intelligent Supplies Technology™
Automatic identification and validation for ribbons , Automatic printer settings Low ribbon warning  , Ribbon saver 

Options 
One-side printing 
Two-sided printing with duplex 
Magnetic stripe encoding ISO: IAT or NTT  
Dual high- and low-coercivity Tracks 1, 2 and 3 (1 track for NTT)  
Smart card personalization  Contact /Contactless all-in-one reader
Contact PC USB Reader, Contact station Prox by HID , iClass® by HID
Clear card personalization
Input hopper empty detection 
200-card input hopper
200-card output hopper
Lockable input tray
Printer security lock, Kensington®   lock 
Soft-sided carrying case
Networking (optional)
Ethernet 10/100 Base-T bi-directional  networking 
Backlit LCD panel  

Specifications
Physical dimensions
L 21.5 in. x W 7.8 in. x H 9.5 in.to H 11.9 in. (54.6 cm x 19.8 cm x24.1 cm to 30.2 cm)  
Weight
Less than 11 lbs (5.3 kg) without supplies 
Print resolution 
300 dots per inch, 256 shades
Electrical requirements 
100/120V, 50/60 Hz , 220/240V, 50/60 Hz
Plastic cards accepted 
ISO ID-1/CR-80 size cards 3.370 in. x 2.125 in. (85.6 mm x 53.98 mm) 
PVC with glossy laminate surface 
Clear cards
Other core materials with PVC
overlaminates are optional
Card thicknesses accepted 
0.009 in. to 0.055 in. (0.2286 mm to 1.397 mm) 
Operating environment
60°F to 95°F (15°C to 35°C)  20% to 80% non-condensing humidity
Storage environment
5°F to 140°F (-15°C to 60°C)  10% to 90% humidity 
Operating system support
Microsoft® Windows Vista,  Windows®      XP,Windows       2003 Server, and Windows®     2008 Server supported on printer driver version 4.0 .Windows®     2000 supported by printer driver version 2.0, Datacard    Open Platform printer driver for non-Windows platforms 
Agency approvals 
UL, cUL, FCC, CE, CCC, Ctick, RoHS

IS24C16A Smart Card by Parallax

Smart cards are used in a variety of applications ranging from telecommunications to personal finance. The IS24C16A smart card is 2048 x 8 bits of EEPROM memory, organized into eight 16-byte pages. The pins of the IS24C16A are accessible through the gold plated contact pads embedded in the card, and when paired with the Smart Card Reader (#32320) can be connected to the IO pins of a microcontroller. The IS24C16A Smart Card provides 2 KB of serial EEPROM accessible by the Smart Card Reader . Memory is organized into eight 16-byte pages, providing a vast amount of storage for your smart card application.

2KB smart card
Features
  • Memory Organization: 2048 x 8 bits, in eight 16-byte pages 1,000,000 erase/write cycles guaranteed with 100 year data retention
  • 5 ms max write time with auto clear
  • Compatible with BASIC Stamp & Propeller™ microcontrollers

Key Specifications
  • Power Requirements: 1.8–5.5 VDC
  • Communication: I C (CMOS)
  • Operating temperature: -40 to +212 °F (-40 to +100 °C)
  • Dimensions: 2.5 x 3 in (6.35 x 7.62 cm)

Application Ideas
  • Security systems
  • Data storage
  • Tracking systems
  • Identity authentication

Tuesday, April 12, 2011

FT232RL single chip usb to serial converter

The FT232R © Future Technology Devices International Ltd. 2011, is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.

The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.

The FT232R is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages.

Hardware Features
  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip - No USB-specific firmware programming required.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
  • Fully assisted hardware or X-On / X-Off software handshaking.
  • Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • In-built support for event characters and line break condition.
  • New USB FTDIChip-ID™ feature.
  • New configurable CBUS I/O pins.
  • Auto transmit buffer control for RS485 applications.
  • Transmit and receive LED drive signals.
  • New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
  • FIFO receive and transmit buffers for high data throughput.
  • 256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • Adjustable receive buffer timeout.
  • Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
  • New CBUS bit bang mode option.
  • Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
  • Device supplied preprogrammed with unique USB serial number.
  • Support for USB suspend / resume.
  • Support for bus powered, self powered, and high-power bus powered USB configurations.
  • Integrated 3.3V level converter for USB I/O .
  • Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
  • True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
  • High I/O pin output drive option.
  • Integrated USB resistors.
  • Integrated power-on-reset circuit.
  • Fully integrated clock - no external crystal, oscillator, or resonator required.
  • Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
  • UART signal inversion option.
  • USB bulk transfer mode.
  • 3.3V to 5.25V Single Supply Operation.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI / OHCI / EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • -40°C to 85°C extended operating temperature range.
  • Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).

Application Areas
  • USB to RS232 / RS422 / RS485 Converters
  • Upgrading Legacy Peripherals to USB
  • Cellular and Cordless Phone USB data transfer cables and interfaces
  • Interfacing MCU / PLD / FPGA based designs to USB
  • USB Audio and Low Bandwidth Video data transfer
  • PDA to USB data transfer
  • USB Smart Card Readers
  • USB Instrumentation
  • USB Industrial Control
  • USB MP3 Player Interface
  • USB FLASH Card Reader / Writers
  • Set Top Box PC - USB interface
  • USB Digital Camera Interface
  • USB Hardware Modems
  • USB Wireless Modems
  • USB Bar Code Readers
  • USB Software / Hardware Encryption Dongles

Monday, April 11, 2011

Local Trainer Board : Digital Circuit

Local Trainer Board : Digital Circuit (Rangkaian Digital/Logika) 
Practice For:
- Logic Gate, AND, OR, NAND & NOR
- Decoder, 2 to 4, 3 to 8, 4 to 16
- Encoder
- BCD to Seven Segment
- Multiplexer, Monostable Multivibrator, Flip Flop, PISO, SIPO
- Binary Counter
- 8 bit Comparator
Built in Modules
- Frequency Meter Display 0 - 40KHz
- 5 Channel Voltmeter input
- 2 Channel Amperemeter input
- In System Function Generator with Square, Sinus and Triangle Output

Package Contains:
- DST-Train-Rlog Modul
- Power Supply 5V/3A
- 10 meters red cable
- 10 meters green cable
- 10 meters black cable
- Lab Book for Student
- Manual Guide for Tutor

Local Trainer Board : Base Electronic Circuit

Local Trainer Board : Base Electronic Circuit (Elektronika Dasar)

Practice for
- Serial / Paralel Feedback Amplifier
- Oscillator Clap
- Oscillator Hartley
- Oscillator Crystal
- Regulated Power
- Power Amplifier
- Analog AND Gate
- Analog OR Gate
- Analog NOT Gate


Built in Modules:
- 3 channel variable 0 - 12V Output
- 5 Channel Voltage Display
- 2 Channel Current Display
- 1 Channel Frequency Meter 0-40 KHz
- In System Function Generator with Square, Triangle and Sinusoidal output

Package Contains:

- DST-Train-Elka
- 10 metres Red Cable
- 10 metres Green Cable
- 10 metres Black Cable
- 5 Power Supply 12V
- Lab Book for student
- User Guide for Tutor

Local Trainer Board : Analog Circuit

Local Trainer Board : Analog Circuit (Rangkaian Analog)

For Practice :
* Differential Amplifier
* Inverting & Non Inverting Amplifier
* Comparator
* Impedance Amplifier
* Transducer Amplifier
* Current Source
* 1st order Active High Pass Filter
* Window Comparator
* Precision Amplifier
* Timer 555
* Signal Generator


Built in Modul
- 3 channel variable 0 - 12V Output
- 5 Channel Voltage Display
- 2 Channel Current Display
- 1 Channel Frequency Meter 0-40 KHz
- In System Function Generator with Square, Triangle and Sinusoidal output

Package Contains:
- DST-Train-RA Modul
- 10 meters Red Cable
- 10 meters Green Cable
- 10 meters Black Cable
- 5 Power Supply 12V
- Labs Book for Student
- User Guide for Tutor

Local Trainer Board : Electric Circuit

Local Trainer Board : Electric Circuit (Rangkaian Listrik)

- For Practice
* Kirchoff Theory
* Voltage & Current Divider
* Power Transmission
* Thevenin & Norton Theory
* Superposition Theory
* Hybrid
* Resiproc
* Serial & Parallel Resonance
* R-C Circuit
* R-L Circuit
* Differentiator
* Integrator
* Low Pass, Band Pass & High Pass Filter
Built in Modul:
- 3 channel variable 0 - 12V Output
- 5 Channel Voltage Display
- 2 Channel Current Display
- 1 Channel Frequency Meter 0-40 KHz
- In System Function Generator with Square, Triangle and Sinusoidal Output

Package Contains:
- DST-Train-RL Modul
- 10 meters Red Cable
- 10 meters Green Cable
- 10 meters Black Cable
- 5 Power Supply 12V
- Labs Book for Student
- User Guide for Tutor

Thursday, April 07, 2011

Switch Power supply cost effective S8JC series by Omron

Switch Power supply cost effective S8JC series by Omron 
The thermal design and circuit design of the 300-W models were improved to achieve a fan-free structure. This eliminates the need to replace fans every few years and greatly reduces the risk of lowering the insulation resistance due to dust drawn in by the fan.
In addition to front mounting and top mounting, you can mount models up to 300-W to DIN Rail for simple installation that reduces installation work
 
S8JC series:

  • z50-24cd 24V/2.1Amp  50watt
  • z100-24cd 24V/4.5Amp  100watt
  • z150-24cd 24V/6Amp 150watt
  • z350-24cd 24V/14.6Amp
  • z035-12cd 12V/3Amp 35watt
  • z050-12cd 12V/4.2Amp 50watt
  • z100-12cd 12V/8.5Amp 100watt

WIZ620wi-EVB , RS-232 to IEEE802.11.b/g/n wireless protocol converter

WIZ620wi-EVB , RS-232 to IEEE802.11.b/g/n wireless protocol converter

Features:
Stand-alone typed 802.11 b/g/n wireless LAN module & evallution board
 -       Access Point, Client, Gateway & Serial to WLAN modes supported
 -       Ethernet to Wireless LAN Bridging : Provide Wireless networking to Wired Network Device
-       Strong Security with 64/128 bit WEP, WPA, WPA2
-       (RG)MII, UART, GPIO, USB, WLAN Interfaces
-       Support Serial Interface for “Serial to Wireless” application
-       Max 90Mbps Data Streaming
-       Compact Size : 50 x 60 x 10.45 (mm)
-       RoHS Compliant
Specification
 
Wireless Specification
Wireless Standard
IEEE802.11b/g/n
Frequency Range
USA : 2.400 ~ 2.483GHz
Europe : 2.400 ~ 2.383HGz
Japan : 2.400 ~ 2.497GHz
China : 2.400 ~ 2.483GHz
Operating Channels
USA/Canada : 11 (1~11)
Major Europe Countries : 13 (1~13)
France : 4 (10 ~ 13)
Japan : 14 for 802.11b (1~14), 13 for 802.11g (1~13)
Korea/China : 13 (1~13)
Output Power
(Tolerance(+/-1dBm)
802.11b : 17dBm@11Mbps
802.11g : 14dBm@54Mbps
802.11n : 14dBm@300Mbps/114.4Mbps
Receive Sensitivity
802.11b:-89dBm@11Mbps
802.11g : -74dBm@54Mbps
802.11n (40MHz) : -66dBm@300Mbps
802.11n (20MHZ) : -70dBm@144.4Mbps
Data Rates
802.11b : 1,2,5.5,11Mbps
802.11g : 6,9,12,18,36,48,54Mbps
802.11n(20MHz) : 14.4, 28.9, 43.3,57.8, 86.7, 115.6, 130, 144,4Mbps
802.11n(40MHz) : 30, 60, 90, 120, 180, 240, 270, 300Mbps
Modulation Type
11g : OFDM (64QAM, 16QAM, QPSK, BPSK)
11b : DSS (CCK, DQPSK, DBPSK)
Operation Distance
802.11b
 Outdoor : 150m@11Mbps, 300m@1Mbps
 Indoor : 30m@11Mbps, 100m@1Mbps
802.11g
 Outdoor : 50m@54Mbps, 300m@6Mbps
 Indoor : 30m@54Mbps, 100m@6Mpbs
802.11n
 Outdoor : 30m@300Mbps, 250m@6.5Mbps
 Indoor : 20m@300mbps, 100m@6.5mbps
Antenna
2T2R 4dBi
Hardware
Interface
(RG)MII, UART, USB, LAN, Power, 2.00mm Pitch Header Pin
U.FL connector (Antenna connector)
Temperature
Operation : -5 ~ 55
Storage : -20℃ ~ 70℃
Humidity
Operation : 10% to 90%, Non-Condensing
Storage : 5% to 90%, Non Condensing
Serial
Baud Rate : 1200 ~ 921,600bps
Stop Bits : 1,2
Parity : None, Odd, Even
Flow Control : XON/XOFF (Software), CTS/RTS (Hardware), none
             UART 1 only supports XON/OFF
Dimension
50 x 60 x 10.45 (mm)
Software
Operation Mode
Access Point, Client, Gateway, Serial to Wireless
Protocol
ARP, UDP, TCP, Telnet, ICMP, DHCP, PPPoE, BOOTP, HTTP, SMTP, TFTP
Security
WEP 64/128bit
WPA/WPA2 PSK/AES/TKIP
802.1x (Radius)
Management
HTTP, Telnet, Serial, UDP
Notification
Event Logging